TIE1-ON 1992 Camaro Z28 *New* Dynomax X-Muffler

[wvXvxvXvw]

Hey man I love it. I have yet to use the X-Pipe muffler, it is still wrapped up and on the shelf. I like that the note retains some chop to it. I was curious if it would completely smooth out. The reason I bought it is for the simple fact it will decrease some back pressure and takes up half the space my two 40s are right now. It will also make it easier for me to use identical length pipes(gives a nicer sound).

[DeltaElite121]

Love it! I'll post a response when I get mine up and running. Running Borla XR-1's on my 88 Camaro.

[TIE1ONZ28]

@DeltaElite121 Cool!

[badroc70]

sweet i got at 91 z 85 iroc and a 89 rs nice to see people with more than one

[stanggonewild]

sounds good man i have a 92 Z/28 also im building a new motor for.

[TIE1ONZ28]

@daytona2134 - Ouch

[CHASNME]

Big improvement! Take care of that idle though it'll sound even better.

[TIE1ONZ28]

@CHASNME - DONE! New vid coming in Spring. ;)

[Cash2112]

I'd like to see what it looks like underneath.

[TIE1ONZ28]

@Cash2112 It looks like a mess underneath and no ground clearance. I'm embarrassed to take a pic. LOL

[jwelsh1238]

i love the 3rd gens especially 91/92 z28's. ur car sounds as good as it looks!!...except for the mud flaps :)

[Raiderfan76]

That's a motor right there! Nice sounding cam!

[TIE1ONZ28]

@lambdalady Thanks. No "action" vids yet, but plan to have some in the near future. Stay tuned. :)

[TIE1ONZ28]

@lambdalady Thanks. No "action" vids yet, but plan to have some in the near future. Stay tuned. :)

[outcastMETALchild89]

hey what kind of tips are those and whats the inlet/outlet size?

Thanks.

[TIE1ONZ28]

@outcastMETALchild89 They are 2.5" in/3.0" out Stainless steel Silverline.

[outcastMETALchild89]

@TIE1ONZ28 thanks..i'm looking to put an exhaust on my 87 iroc-z. its the 350 TPI all stock. I'm looking into a Dynomax Ultra-flo welded muffler(single in/duel out), but i can't decide what size I-pipe to go wtih that would give me the best sound and performance. a 3 inch or 2.5 inch? (Single exhaust setup) I plan to keep it mostly stock too. any advice would be appreciated.

[MrDarealsaint]

car is rtather unique love the sound favorited.... where you bought?

[TIE1ONZ28]

@ravagebang The Dynomax gives it the sound, but the cam/headers combo make it unique. Ya know?

[ravagebang]

@TIE1ONZ28 I understand...! I´m planning to put a new cam in my 1992 Camaro RS 305 5.0 l. TBI. I made a list of possible alternatives: Crane Cams CRN-104211, Lunati LUN-50142, LUN-50160, Comp Cams 08-500-8. Which one could be your choice in this case?

[TIE1ONZ28]

@ravagebang The Comp Cam one sounds good. Probably won't have to get the car tuned for that cam either which is nice.

[MrDarealsaint]

where did u get them? looking for a new set of exhaust.

[TIE1ONZ28]

Jeg's for the muffler, Hooker LT's and tubing.

[ericg83z]

dude whats done to the motor?????????

[TIE1ONZ28]

There's not enough space to type it all! Haha. Basically a total rebuild - Forged internals, cam, heads, HSR intake, headers, etc. Everything new but the block and oil pan.

[derricksmash]

i've been on here for hours trying to find a muffler choice for my 91. (see my vid or two). i think i like the few dynomax mufflers i've heard.

[camkid1991]

where you located in missouri

[Cash2112]

Sounds great, please shoot a vid that shows the underside. I'd like to see how you routed the driver's side pipes.

[TIE1ONZ28]

See email I sent.

[rmrooster01]

Dang sounds like a drag racer. Better than the flowmaster rattle cans, ha.

[TIE1ONZ28]

See emails I sent ya.

[will84cam1]

im shoping for long tube headers for my 84 z28 ive got about 7grand in my car and im really trying to find long tube headers with the best ground clearance, you would happin to have any pics of the underneath of your car where the collectors run by front fram rails would you.would be great any help you can give me.nice car...

[creatureboards1]

hey man i want to do the same thing except i want to dump the exhaust right before the rear axle. Can you send me a few pic of how you set it up under the car?

[ScotishPiratesJonB]

Wow. Nice Camaro. How much did it cost to get the exhaust like that?

[TIE1ONZ28]

Thanks. I had to fab and weld the exhaust myself - 2.5" pipe off the Hooker LT headers, bends, etc. into the X-Muffler and out to the aluminum tips. Total cost for all....maybe...$350 (not inlcuding Hooker LT cost).

[CUZJARRETT94]

damn,i guess its time to get rid of my 17 year old stock exhaust on my 92!!! lol and nice IROC-Z!!

[TIE1ONZ28]

Do it! And thanks. ;)

[ls6guy]

cool what year is that iroc-z next to you're car

[TIE1ONZ28]

Thanks. The red IROC is a 1986.

[ls6guy]

sweet camaros