My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer. yet my wheel still won't stay spinning what do i do?
Hi, i want to know how much Mamps my moter is using how do I do this. So the red lead from the meter gos to positive on the battery what about the black lead
Hi, thanks for the info, but im still stuck, wondering whats going on in the quantum world. I spin the rotor and two magnets always stop off center of the core. If I put the rotor closer to the core then one magnet stops directly over the core. But the dam thing just wont keep spinning. any pointers?
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
Nice vid! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
Hi. I am building my fist right now and i have everything built but i just cant seem to get it wired correctly. I am using invertebrates model and its not working. Please email me at befeproductions@yahoo.com or message me at my channel theesve. Please help! Im on day three!
The time has come for Free energy to be revealed ,But Elite controllers don't want ppl to be free from the costs of energy,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Be a part of the energy revolution!
Nice job. Thanks for the explanation and material source links. I've got two of these running now and I don't understand why they work, but it is undeniable that they do. I have taken a totally dead 12 volt 775 CCA car battery and brought it back to life. It now reads 12.8 volts and 400 CCA and my source battery is still after 5 days of constant running, at over 12 volts and reading 400 CCA. Working on an 8 coil unit next. Keep up the good work.
I am using 12 volts. To answer another of your questions. I believe that overunity may be created by adding additional coils. It will slow down your motor because it is adding a load to the device.
I am in the process of re-working my design. I have not measured overunity, at this point. But there are many factors here, momentum, number of coils, number of magnets, how far they are spaced, etc. So, I am building a larger one with many more coils and magnets.
This has been flagged as spam show
where did you put the resistance in the potentiometer? i can`t see how
cloverpark2011 3 months ago
This has been flagged as spam show
My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer. yet my wheel still won't stay spinning what do i do?
333kgb 7 months ago
cloverpark2011 3 months ago
i thik the dog did the circuit !
jpjude68 8 months ago
LoL! Yep... he sure did! Capone's cousin is Wilfred. Capone likes to teach me things.
atlantapad 7 months ago
Hi, i want to know how much Mamps my moter is using how do I do this. So the red lead from the meter gos to positive on the battery what about the black lead
333kgb 9 months ago
@333kgb I suggest you use a multimeter and put it in line with the motor.
atlantapad 8 months ago
This has been flagged as spam show
Hi, thanks for the info, but im still stuck, wondering whats going on in the quantum world. I spin the rotor and two magnets always stop off center of the core. If I put the rotor closer to the core then one magnet stops directly over the core. But the dam thing just wont keep spinning. any pointers?
333kgb 9 months ago
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
333kgb 10 months ago
@333kgb The bulb can be attached in either direction, but it must be electrically connected across the transistor.
atlantapad 8 months ago
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
333kgb 10 months ago
Nice vid! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
333kgb 10 months ago
Very cool video. I admire the fact that you make room to do what you love. Keep up the great work. Be safe and well
walkercreations 1 year ago
Hi. I am building my fist right now and i have everything built but i just cant seem to get it wired correctly. I am using invertebrates model and its not working. Please email me at befeproductions@yahoo.com or message me at my channel theesve. Please help! Im on day three!
theESVE 1 year ago
This has been flagged as spam show
The time has come for Free energy to be revealed ,But Elite controllers don't want ppl to be free from the costs of energy,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Be a part of the energy revolution!
violafinishda 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these
information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the
revolution!
graywackeknifebdr 1 year ago
Nice job. Thanks for the explanation and material source links. I've got two of these running now and I don't understand why they work, but it is undeniable that they do. I have taken a totally dead 12 volt 775 CCA car battery and brought it back to life. It now reads 12.8 volts and 400 CCA and my source battery is still after 5 days of constant running, at over 12 volts and reading 400 CCA. Working on an 8 coil unit next. Keep up the good work.
localestore 1 year ago
You could make aspeker out of that coil...with enough amplification.
GeeksRus95 2 years ago
where did you put the resistance in the potentiometer? i can`t see how.
jr
skycollection 3 years ago
hey nice one man, i just got mine running.. haven't used a bedini circuit yet.. just got it running on reed switch and relay, how many volts u using?
dodoshlodo 3 years ago
I am using 12 volts. To answer another of your questions. I believe that overunity may be created by adding additional coils. It will slow down your motor because it is adding a load to the device.
I am in the process of re-working my design. I have not measured overunity, at this point. But there are many factors here, momentum, number of coils, number of magnets, how far they are spaced, etc. So, I am building a larger one with many more coils and magnets.
atlantapad 3 years ago
Well done!
introvertebrate 3 years ago
Good work Man! Keep at it, I will follow your progress, mine has been running for four months now!
FORCETHETRUTH 3 years ago