love the pietta's i got 5 of them. Great video, but what i would recommend is using a loading stand (stops from waving the pistol around while loading) and after each powder charge is dropped, load in a patch. Chambers with exposed powder freak me out a bit.
I was using patches and there's no reason to fret without patches so long as that ring of lead is left over after loading the ball, that means there's a perfect seal between the powder and the outside world.
@Mr2ndAmendment i get that about a correct fitting ball. What i was meaning is that you charged all the cylinders with powder and then went around and added a patch. What i was meaning was to throw the charge, then add a patch, move onto next cylinder, powder patch etc, this way each cylinder powder charge is covered. not really a big deal, just thought it would be an extra safety feature. its what i do in a range situation and people are with in a few feet of each other shooting
@HalfLifeAMD and there is a risk of an errand spark. When you're alone as you are, errand sparks are not a concern. I wish i could shoot out in the field as you do, but here we are stuck to using pistols only at ranges. which is total BS!
Just received the Pietta 1850 Navy Confederate today. Question----------------does the screw have to be removed in order to pull the pin for cleaning. I tried to back off the screw and it would not come out completely. As it is a new gun, I did not want to force it out. The Pietta owners manual does not mention removing the screw HELP lol Ray
All you have to do is get a small piece of wood and punch out that rectangular pin from right to left if you're looking down the barrel as if to shoot it. I've purposely worn it down with enough times that I can pull it out with my hand without tools. After several times it loosens up, I never had to undo any screws, just punch it out and do it a little bit to break it in.
Just ordered the same revolver from Cabelas today. How are you cleaning your revolver after shooting. Some say (via U-Tube) don't use Hoppes 9, some videos show using Hoppes 9 while others use hot water with mild soap.
What does the owners manual say? I am not new to firearms, but, like you, new to black powder.
Hoppes isn't destructive for the gun, it's just not effective. The best combination of stuff I've noticed is hot water. Hot water is the most underrated solvent available and it's really effective, especially for the cylinders. I hate to be a poster child for cabelas, but I use their black powder cleaning solution. It prevents corrosion and breaks down the powder. Lastly I use shooter's choice bore cleaner to break down the massive amounts of lead in the bore. Good luck!
love your revolver. how much did you pay for it?
renegadeskinninja 2 weeks ago in playlist More videos from Mr2ndAmendment
@renegadeskinninja
Bought it for $129 from Cabelas. More vids coming!
Mr2ndAmendment 1 week ago
@Mr2ndAmendment cool, thanks
renegadeskinninja 1 week ago
love the pietta's i got 5 of them. Great video, but what i would recommend is using a loading stand (stops from waving the pistol around while loading) and after each powder charge is dropped, load in a patch. Chambers with exposed powder freak me out a bit.
HalfLifeAMD 1 month ago
@HalfLifeAMD I hear you, but remember that Civil War soldiers and the cap-&-ball-shooting cowboys didn't use loading stands.
whenvaporsvanish 1 month ago
@HalfLifeAMD
I was using patches and there's no reason to fret without patches so long as that ring of lead is left over after loading the ball, that means there's a perfect seal between the powder and the outside world.
Mr2ndAmendment 1 month ago
@Mr2ndAmendment i get that about a correct fitting ball. What i was meaning is that you charged all the cylinders with powder and then went around and added a patch. What i was meaning was to throw the charge, then add a patch, move onto next cylinder, powder patch etc, this way each cylinder powder charge is covered. not really a big deal, just thought it would be an extra safety feature. its what i do in a range situation and people are with in a few feet of each other shooting
HalfLifeAMD 1 month ago
@HalfLifeAMD and there is a risk of an errand spark. When you're alone as you are, errand sparks are not a concern. I wish i could shoot out in the field as you do, but here we are stuck to using pistols only at ranges. which is total BS!
HalfLifeAMD 1 month ago
thanks for posting, i enjoyed it very much. now i m going to go out in the cold and shoot mine.
glynamus 1 month ago
@glynamus
Thanks, good stuff!
Mr2ndAmendment 1 month ago
Santa is gonna bring me one of these for Chistmas, i can't wait to try it out !!!!!!!!
iamin2pain 2 months ago
Thank you very much for the reply. I just did not want to damage a new gun.
reysaint1 2 months ago
Just received the Pietta 1850 Navy Confederate today. Question----------------does the screw have to be removed in order to pull the pin for cleaning. I tried to back off the screw and it would not come out completely. As it is a new gun, I did not want to force it out. The Pietta owners manual does not mention removing the screw HELP lol Ray
reysaint1 2 months ago
@reysaint1
All you have to do is get a small piece of wood and punch out that rectangular pin from right to left if you're looking down the barrel as if to shoot it. I've purposely worn it down with enough times that I can pull it out with my hand without tools. After several times it loosens up, I never had to undo any screws, just punch it out and do it a little bit to break it in.
Mr2ndAmendment 2 months ago
Just ordered the same revolver from Cabelas today. How are you cleaning your revolver after shooting. Some say (via U-Tube) don't use Hoppes 9, some videos show using Hoppes 9 while others use hot water with mild soap.
What does the owners manual say? I am not new to firearms, but, like you, new to black powder.
Great informative vid, and beautiful scenery.
reysaint1 2 months ago
@reysaint1
Hoppes isn't destructive for the gun, it's just not effective. The best combination of stuff I've noticed is hot water. Hot water is the most underrated solvent available and it's really effective, especially for the cylinders. I hate to be a poster child for cabelas, but I use their black powder cleaning solution. It prevents corrosion and breaks down the powder. Lastly I use shooter's choice bore cleaner to break down the massive amounts of lead in the bore. Good luck!
Mr2ndAmendment 2 months ago
Looks like fun.
AnimeFanatic5602 3 months ago