Added: 2 years ago
From: 1320video
Views: 64,210
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (190)

Sign In or Sign Up now to post a comment!
  • oops....wrong comment.

  • Comment removed

  • Giving dumb people access to higher and higher boost pressures is like giving North Korea nukes. Fuck you China.

  • And don't just slap a fucking flywheel on an engine without getting it fucking balanced.

  • If you ever do this again please don't do it on a public road near me and wear your GODDAMNED SEATBELT

  • DSMs are only unreliable if you do something wrong and even then its steal your fault.

  • where the bolts to tight or arp shiity bolts ?

  • so that's how you remove a DSM tranny

  • Hoping this doesn't happen in my 94 AWD Talon...

    That's why I have the ARP Flywheel bolts for a Supra with the bolt holes bottom tapped and a auto plate to space the bolts out slightly.

  • What is a "clutch fly"? You say the clutch fly is out the front of the car.

  • have fun. that broke the flywheel bolts off lol

  • OH, AND BY THE WAY. YOUR SHITTY FUCKING CAR GOT OWNNNNNNNNNED

  • HOW THE FUCK IS THIS VIDEO INAPPROPRIATE. I AM FUCKING DISGUSTED I HAD TO SIGN IN JUST TO WATCH THIS.

    FUCK YOU, SHITBREATH COCKSUCKER.

  • fly's out

    fly's out

    fly's out

    fly's out

    fly's out

    fly's out

    fly's out

    fly's out

    fly's out

    fly's out

  • Why are people so fucking stupid and dont know how to torque bolts down. And to think in 20 years these are the morons who will be working on our vehicles.

  • Nice stopping distance

  • why did someone flag this as pornographic?

  • @LLCoolPass Because this tranny is fucked!

  • @LLCoolPass Perhaps some people are turned on by shirtless soft pale white guys?

  • Was it shear force that destroyed the bolts. Or did they find Rust pitting on the bolts. On Supraforums someone had a rust pitting problem on ARP Head Bolts.

  • should have used loctite on the flywheel bolts :)

  • no the trans housing broke then the flywheel obviously

  • How does a bell housing just break without something hitting it? Even if thats what happen then the clutch and flywheel assembly shouldn't have went sliding down the road... Like I said the flywheel bolts backed out and then the clutch and flywheel assembly came off and obviously broke the bell housing... That seems a lot more realistic than the other way around...

  • think about it again. the transmission is feeling the ressitance [newtons law] of the car putting down 9 units of force [due to gearing], but the engine[specifically the flywheels] is only putting out one unit of force. the trans bell housing was only designed with the 2 units of force [the gearing and 1/4 engine power before engine mods that increased power to 1 unit] in mind with a maximum of 4 or 5 units of force design cap. going to 9 caused the failure, then the trans input shaft

  • input shaft was now supporting the trans and forces and axles and so on ... the input shaft is now pushing down on the flywheel and pilot bearing and clutch .... the flywheel to crank bolts were now not only dealing with a perpendicular force but a partly horizontal force in radial direction. --- snapping the flywheel bolts.

    further evidence is that the problem occured, THEN, moments later , the clutch and flywheel assembly can be see falling out of the car.

  • First off that that doesnt have a pilot bearing... its a floating input shaft... Second I have never seen or heard of any bell housing just breaking apart espeically on a 4g63 power vehicle.. Go back to your engineering school even though you don't no shit...

  • i know how to spell know

  • Thats great do you want a cookie?

  • you're just jealous

  • @LLCoolPass If you go to 3:41 you can see where the flywheel put groves in the bellhousing. The car was at the top of third when the flywheel bolts snapped causing the flywheel to be held in place by only the input shaft of the tranns. This was too much force for the input shaft causing it to snap. Now you have about 25-30lbs of steal free spinning and bouncing around inside the bellhousing. Bellhousings are not made to take this kind of force, causing it to do just what rods do to blocks.

  • I just bought a red one like this. Its a 92 with a four speed manual. Mine is slow as shit, 90 hp. Colts came with a Mitsu 4G61t. It had 135 HP. Wi8sh I could find one to swap, to give it more balls

  • lol poor little colt.

  • haha

    2:09

    basically exactly my laugh when i saw the clutch flying across the road.

    this is Soo win.

  • wow, insanely funny but then ...fail!!

  • If you go 120 in a colt, you have balls.

  • To soak in water and make sure the tranny fluid doesn't catch on fire on his exhaust and burn his car to the ground maybe???

  • @1320video

    For real if catched fire, it would prolly be a good thing... then he could buy an EVO and- have a mitsu motor in a car that had a correct tranny 4 it and not fall out..

    FAIL!

    PS- GOOD WHP #'s though :P

  • fuck evo!

  • wow.... must hace been hard to come up with that one huh?

  • @volvocc941

    bcause we need the tan 

  • holy shit lol thats nuts

  • My tranny broke in the front jus like yours but didnt fall out taking out my head turbo and front ear off the block but going like 30 from a launch but my flywheel stayed on clutch flew out too but might of been from test launches on slicks with no lsd

  • goes to show the 4g63t is a torque monster!!!!!

  • @drkspd

    Goes to show 2 things actually....

    1-How poorly he designed/built the whole engine/tranny

    2-Why Cars whith a certain amount of WHP should be on the drag strip not on the street, cuz he would have to have a reinforced frirewall, NHRA rules.

  • aaaaaaaaaaaaaahahahahahaha shoulda had a t-56

  • wow people are haters. its a fuckin video meant for fun. why do people comment on videos talking shit. dont comment if its not something good. its a funny video so get over it.

  • 1:32 jingle bells !

  • wow you failed

  • very impressive and funny also. i like. A++++

  • Who flagged?!

  • thats awsome:P

  • he flywheel bolts where to long.

    ARP dont make flywheel bolts

  • Go google "ARP flywheel bolts"

  • @zaubertax arp makes almost any nut and bolt you need on a car.

  • Looks like wayyy to much power for that weak Jap. tranny! hahaha Next time tighten clutch to flywheel bolts to spec! lol

  • mmm jap tranny ;)

  • That is why you don't buy Made In China cars =)

  • You sir are a fucking retard!

  • lmao hahah

  • Why was this video flagged?

  • language

  • pretty funny!

  • How about wearing a seat-belt.

  • you sir are a jackass.  Learn to fix the weak points next time. young and dumb

  • I had a Mirage. (Same platform) It was one mirage I wish I'd never seen. Those cars are the most abominable piece of crap that anyone was ever suckered into buying. If you want to spend money on making a car go fast, do it to a car that DOESN'T SUCK NEXT TIME!

  • hahahah, tranny swaped its self out... thats what happens at 36 PSI you said?

  • haha awesome.

  • bad ass car

  • LOL

    From a fellow DSM'er... this video is awesome!

  • colts are fucking bad ass. Sucks about your tranny.

  • I see all the V8 guys commenting on here...funny how they make fun of the car and say it wasn't built right cuz it breaks...sounds like someones upset it would beat there mustang or camaro...goodshit man keeep having fun with it i got Laser RS and a Talon TSi myself..fun cars man!!!!

  • Yeah,you spend good money to try to make it fast and it breaks b/c its a fucking moms grocery getter moron!

  • 120mph and no seat belt. You're lucky that's all that happened.

  • Loool colt 0 - flywheel & cluch 1 !

  • Damn it was scary with all the noise.

    Glad that you guys are ok.

    Anyway there is alot of haters who hates sleepers on the road.

    :)

  • Dude, you look just like my buddy Randy in Halifax!!! He did the same thing in a Colt with Nitrous too. It took about 20 nitrous applications till it blew the head gasket appart.

  • lmfao that fucking classic

  • What a dumbass.Get a real fucking car next time and not a grocery getter.

  • Lol, at least his grocery getter is better than your faggot mustang, why don't you get a real car that actually gets out of its own way?

  • Yeah its better,lol It lasted less than 4 minutes b4 it broke dumbass rice boy.I hope you enjoy flipping burgers dumbass.

  • lol. Nice. What did you expect man. You need to make you ride able to handle the power before you give it power.

  • kurwa tyle roboty przy aucie i kicha :(

  • HAHHAHHAHAHAHHA

  • lol

  • so did the flywheel take off the gearbox or the gearbox take off the flywheel?????

    i'm lost.......

    fucking awesome vid..... i am guessing that is the 63t in there, not the 61t???

  • gt42

  • NO, the engine not turbo you tard

  • why the fuck wuold someone flag this video as 'innapropriate'.

    Some people need to be bitch slapped into the stone ages

  • Got love some of this community.

  • ok if you think there is a fire under the bonnet dont open it like this guy did, just pop it and spray the extinguisher in the gap then open the bonnet slowly. i know the car wasnt on fire in this case but if it was, opening the bonnet like that would have fanned the fire and made it worse

  • Watching these "pieces of shit" spank bigger better cars: priceless

  • but at the end of the day, its still a piece of shit and is just a big advertisement of your small, pathetic income.

  • Lol, you are a retard. Less money spent on a car is more money spent towards bigger and better things. Go have fun with your mustang buddies and give each other the ole' reach around. You know your jealous.

  • Jealous of that broken shit? lmao My cobra is pushing 450 hp and the tranny don't fall out going down the road...hahahahahahahah..fuckin­g ha asswipe!

  • last time i checked fords the only one not owned by the fucking goverment and thats a dodge colt, you piece of shit cant even tell the difference between demestic and foreign, try not making a total jackass of yourself and just stop typing

  • Comment removed

  • I know that feeling all too well. Nice Colt!

  • I'm surprised there weren't more parts and fluids scattered over the highway.

  • Wow, I'd pay tens of dollars for that.

  • How the hell does this happen? Sick little sleeper though.

  • Ok, for the uninformed and generally ignorant:

    Colt + over 520 horsepower TO THE WHEELS on a stock transmission = failure bound. Shit happens. Most people who tune cars know this, and keep a second car around for when (not if) a failure occurs.

  • sounds like ther to stupid to upgrade the whole drivetrain so whats the point

  • Is it just like pointing out that your grammar is horrible, so what's the point in you posting?

    1320 has been around a LONG time. I have a ton of their vids on my computers. They're very knowledgeable. I would love to hang out with some of them.

  • And ford is to stupid to just give up. Your a homo, have fun with your shit box ford faggot.

  • Only a faggot would drive that ugly shit box....if it was still running...lmao @ you!

  • Hell, 520rwhp on a stock clutch is just plain retarded. Even the clutch in my STI isn't built to handle 520rwhp. Amazing that they would dump that much money into an engine then not upgrade the rest. MOAR POWURRRRR!

  • RWHP = Rear Wheel Horsepower... Colt and STI = AWD... You lose...

  • Not with rear wheel drive conversion and a Cusco diff. Irregardless, that much WHP on stock parts is plain idiotic. Hope you don't think the STI in Formula D is AWD...

  • Nothing in your STI is built for anything over stock HP dipshit, get an EVO. Oh wait, you like the 3 cylinder sound and no power.

  • My god!! Some people just dont know how to build a car.

  • looks like the flywheel let go, cutting thru the bellhousing and disconnecting it from engine. that would make sense if youre turning alot of rpms on the stock flywheel.

  • how did that even happen? were the bolts weak?

  • the only idiots are the dumbasses posting negative shit.

    sweet car man. csm's rock it.

    1900lbs+over 400hp=shit all over everything else.

    fucktards and their stupidity.

    keep up the good work dude.

  • thats 400 hp that no longer reaching the pavement so that was kind of pointless

  • Not without a transmission you dickless piece of shit. LMMFAO.

  • HA HA stupid fucking douche bags.  What a moron.

  • those couldn't handle the stock engine in its own unibody. I see the cage..did you think the power was just going to dissipate to true torque? There is not much guidance in this build.

  • ah what?

  • buut dude it has a turbo 4, it can go 200mph , can't it?

  • lol the sounds of shit breakin was funny

  • You gotta upload this stuff in atleast HQ man!

  • Is there evidence off rust pitting in ARP bolts?If i remember correctly ARP has had this problem whit their head bolts.

  • So, all that money spent on the car and you are too stupid to buy a fire extigusher?

  • He had one didnt you see him get it outta that glovebox

  • He said in the video that he didn't have one. Listen from time index 1:51, he says he does not have one.

  • no he grabbed a piece of paper or something.

  • no good but funny!!!

  • WOW!!!!!!! i cant believe that happend good thing it was an empty road

  • I guess thats what happens when you have more money then brains lol

  • This is why I use arp flywheel bolts and loctite on my Colt. lol insane

  • They were one week old ARP bolts, snapped straight in half

  • oh shit, i guess i need to make more power then. lol

  • An out of balance pressure plate/and or flywheel will make mince meat of any flywheel bolts regardless.

  • This has to be the funniest thing I have ever seen happen to a car.

    Sorry about the damage!

    But what a great video.

  • not badass dude, your a fucking retard

  • nice car

  • you cant polish a turd

  • No, but you can make it go like a raped ape. lol

  • Doesn't have to be pretty to go fast.

  • AHAHAHAHA CAMMAN AAHHAAHA

  • so I want to know more about the car, I mean, who mods a COLT? I like the unique factor in it, what motor was in it? And I herd turbo,right ?freakn sweet

  • 4g63 direct swap

  • well obviously this guy in the video. I know of 2 here in my home town that have the 4G63T swap, one is pretty quick , and one is built balls to the wall and runs 10's with slicks. Both are sleepers.

  • ha!

  • When is this movie out!!!!!!!!

  • LMFAO

  • im gonna take a guess and say that the stock tranny couldnt take that much boost.

  • That was freakin' Awesome, but bad! Better get that fixed!

  • so I wonder what happened. Flywheel bolts backed out or broke, causing the trans to get smashed and remove itself?

    Mount and etc got ripped out too I'm assuming?

  • that was awsome but sucks at the same time

  • YOU GOT FUCKED OVER!!

  • hope u get it fixed soon

  • dumbass

  • love you too

  • you wanna make out?

  • very nice

  • You're fucking lucky it didn't lock up. Full lock at 130MPH would not be fun. A clutch shield wouldn't have done anything if the transmission falls out.

  • maybe next time actually tighten the trans bolts, before you smoke the joint. Sorry it happened but dude that was some funny shit. glad you weren't hurt.

  • Great vid 5/5

  • WEIGHT REDUCTION :)

  • hahahaha ford woulndt do that

  • That's a new one for me

  • holy crankwalk batman!!!

  • lol at the end "your next mod needs to be a scatt-er-shield"

  • thats why drag racers use clutch shields, i can honestly say i have never seen that happen before at least your work is half done. lol.

  • didn't this used to be white?

  • It is a first time for everything and DAMN this is the first I have ever seen wacked out shit like this. What you going to upgrade to?

  • How did it fall out??? THAT'S WHAT SHE SAID!! LOL

  • hahah im surprised no one screamed. . . NOS!!! hahahah