@Nebula735 go to modularheadshop,com for the best cams you can get.....your power will not come from lift but from how soon and how long the valve opens on the 2 valve heads....mhs cams are the best for the 4.6 2 valve sohc 281 cid "pi" or "npi" heads....email nick with what you are doing to your car and he will help you with the best bullet cam for the 2 valve..his heads and cams are on the world fastest npi na mustang.....
@TheSleepermgm Wow thanks, I'll get in contact with him!, do you think these cams will work well with a 5.4 2v? Since they are the same heads and all would these cams work just as well with the longer stroke of the 5.4 I guess is what I'm getting at?
@Nebula735 i think its the same cam but nick will have a cam for your 5.4l 2valve......i think he has them for sale on the page but if not i know he can make you a set.....
@TheSleepermgm Alright! Thanks for the info once again! I'm looking into swapping a 5.4 Longblock into my 03 Panther since it's an easy bolt in. With the help of Crownvic(dot)net it should be easy.
@Nebula735 sounds fun....lol...when mine blows i am going with the 4.6l 4v cobra engine just like the marauder .....then get a twin turbo remote mount kit from sts turbo to push out a good 450hp +.....
@TheSleepermgm Ouch that's much more work than mine, I already looked into it, and noone wants to do that because it involves ripping out the interior and engine bay to swap out the ECU or PCM I dont remember but it's a lot of work. with a 5.4 its basically just a block swap, and reprogram the computer to tell it it's no longer a 4.6 but a 5.4 which is easy.
@Nebula735 i didnt know that...i thought that since i have the same body on 00 mgm as a 03 marauder that i could find a crashed marauder in a junk yard and swap out the ecu and that would be it..i didnt know that the 5.4 will bolt right in with no problems ..i know that "hardballer" makes a performance intake manifold for the 5.4l swap you should check it out so you dont have to use the 4.6 intake manifold on it....you should get a 5 speed in her to....there a guy on here that has one
@djsuperstar713 if i were you i would go to modularheadshop,com for the best cams.....nicks cams are a asstone better then the comp and other brands out ....your power is not in the lift on a 2 valve its in how long and how soon the valves open and stay open..
Decent cam choice and sensible too. Too much cam will make it a real pig. This has a nice sound and quick throttle response. Almost sounds like what the E303 cam does to the 5.0 Mustang. I'm in the market for a P71 myself and hope to find a nice black one but those are hard to come by.
I think mine sounds just as good. :) lol I only got some cherry bombs on it. But it sounds nice. Spent 70 bucks. But deff worth it. If you want a good sound.
He's trying to help him save his engine and let other people know so they dont do work like this and rev the shit out of it and blow the engine you ignorant fuck.
@1983BOWTIEBEATER That wasn't too high, or too fast. If anything, I would be concerned about the low idle dip, but even that shouldn't be too big of a deal. Obviously you don't know too much about cars.
love the exhuast man... can't wait for tax season cause i'm getting mines cammed out too.... matter of fact when you put your cams in, did you do anything else to it while the heads were off?
An exhaust company named Stainless works is making longtube headers for these cars now and they are dead sexy!! look their site and order some up. We need more vics that sound like this.
@jeepinjoe123 Dan knows AAAAALLL about those. lol He has custom longtubes currently because he wanted longtube headers way before Stainlessworks came out with theirs. He didn't want to wait on the inventor and at the time nobody had heard of them yet.
The nastiest sounding vic on youtube, you nailed it! I have a 2001 with no cats and flowmaster 40's, can you share what cam your using and did you do a swap to posi?
Bad ass. I wanna do something similar to my '03 Crown Vic. What cam did you go with? Did you have to change to a different torque converter to accommodate the high lift?
Woo nice man honestly
loverslane911 4 days ago
Can those cams fit in a 1996 mercury grand marquis ls?
jsmoney28 1 week ago
thats one sexy bitch !! .....AND THE 4.6 2V SOHC 281 CID FOR THE WIN !
TheSleepermgm 2 months ago
LOVE the car, man - awesome job! :D
enforcer254 3 months ago
IMA DIE HEART CHEVY MAN BUT THIS IS ONE NICE ASS CROWN VIC...THUMPS UP DAN
stuntout100 3 months ago
im from st paul. and wondering if you did all the yourself. if not how much diid you shell out for labor.
mremcee1 3 months ago
its freezin to death cant u hear the teeth lol
akswagga2010 4 months ago 2
Minnesnowta for the win lol.
Nebula735 4 months ago
the way all cop cars should come
p4ndiamond 4 months ago
Can you tell me what cams you have? Im planning on doing a rebuild on my 2v 4.6 and interested in these cams.
Nebula735 4 months ago
@Nebula735 go to modularheadshop,com for the best cams you can get.....your power will not come from lift but from how soon and how long the valve opens on the 2 valve heads....mhs cams are the best for the 4.6 2 valve sohc 281 cid "pi" or "npi" heads....email nick with what you are doing to your car and he will help you with the best bullet cam for the 2 valve..his heads and cams are on the world fastest npi na mustang.....
TheSleepermgm 1 month ago
@TheSleepermgm Wow thanks, I'll get in contact with him!, do you think these cams will work well with a 5.4 2v? Since they are the same heads and all would these cams work just as well with the longer stroke of the 5.4 I guess is what I'm getting at?
Nebula735 1 month ago
@Nebula735 i think its the same cam but nick will have a cam for your 5.4l 2valve......i think he has them for sale on the page but if not i know he can make you a set.....
TheSleepermgm 1 month ago
@TheSleepermgm Alright! Thanks for the info once again! I'm looking into swapping a 5.4 Longblock into my 03 Panther since it's an easy bolt in. With the help of Crownvic(dot)net it should be easy.
Nebula735 1 month ago
@Nebula735 sounds fun....lol...when mine blows i am going with the 4.6l 4v cobra engine just like the marauder .....then get a twin turbo remote mount kit from sts turbo to push out a good 450hp +.....
TheSleepermgm 1 month ago
@TheSleepermgm Ouch that's much more work than mine, I already looked into it, and noone wants to do that because it involves ripping out the interior and engine bay to swap out the ECU or PCM I dont remember but it's a lot of work. with a 5.4 its basically just a block swap, and reprogram the computer to tell it it's no longer a 4.6 but a 5.4 which is easy.
Nebula735 1 month ago
@Nebula735 i didnt know that...i thought that since i have the same body on 00 mgm as a 03 marauder that i could find a crashed marauder in a junk yard and swap out the ecu and that would be it..i didnt know that the 5.4 will bolt right in with no problems ..i know that "hardballer" makes a performance intake manifold for the 5.4l swap you should check it out so you dont have to use the 4.6 intake manifold on it....you should get a 5 speed in her to....there a guy on here that has one
TheSleepermgm 1 month ago
@Nebula735 i just looked and he has cams for the pi 5.4l 2valve engine......
TheSleepermgm 1 month ago
what cam is in there?
benidefelice 5 months ago
where did u get the camms,i have a crown vic and i want it to sound like that
djsuperstar713 5 months ago 3
@djsuperstar713 if i were you i would go to modularheadshop,com for the best cams.....nicks cams are a asstone better then the comp and other brands out ....your power is not in the lift on a 2 valve its in how long and how soon the valves open and stay open..
TheSleepermgm 1 month ago
Decent cam choice and sensible too. Too much cam will make it a real pig. This has a nice sound and quick throttle response. Almost sounds like what the E303 cam does to the 5.0 Mustang. I'm in the market for a P71 myself and hope to find a nice black one but those are hard to come by.
Sidewinder9877 6 months ago
But yours would blow mine away. And if I had the cash I would do the same stuff. Nice car just sounds a bit different.
FordVic99 7 months ago
I think mine sounds just as good. :) lol I only got some cherry bombs on it. But it sounds nice. Spent 70 bucks. But deff worth it. If you want a good sound.
FordVic99 7 months ago
nope its got full bolt ons stall, gears etc, its now also supercharged bbut i havent taken any videos of it since i supercharged it.
Danthevicman2 8 months ago
all you have is a cam and exhaust?
nineEIGHTstangGT 8 months ago
sounds good man nice vic. sounds like my truck lol.
GlockMonster29 9 months ago
sounds nice bro
northlanefla 9 months ago
sonds so nice!
JoshuaBaldwinBrown 10 months ago
Mustang with a badge
RobBanks82 11 months ago
I'm working towards getting the same effect by tuning the idle speed on my CVPI.
superstormj 11 months ago
damn minnesota winters must get sketchy in that baby
titan56l 11 months ago
comments are awsome lol
Danthevicman2 11 months ago
whats the numbers on the cams ?? what stage are they and where did you buy them ?? and are they npi ??
CREAMFILLEDANISH85 1 year ago
aaaaaaw someone loves there flowmasters.... :D i love me vic
JamesLandrum 1 year ago
not good for the motor to be revved to high and too fast :P
1983BOWTIEBEATER 1 year ago
@1983BOWTIEBEATER lol who give a fuck.
bobbybob3680 1 year ago
@bobbybob3680 lol who the fuck asked you?
bitch
1983BOWTIEBEATER 1 year ago 8
@1983BOWTIEBEATER why you call bitch i say who care no big deal. asswipe.
bobbybob3680 1 year ago
@1983BOWTIEBEATER
He's trying to help him save his engine and let other people know so they dont do work like this and rev the shit out of it and blow the engine you ignorant fuck.
Nebula735 11 months ago
@1983BOWTIEBEATER go fuckurself u little cunt nugget
bobbybob3680 10 months ago
@1983BOWTIEBEATER That wasn't too high, or too fast. If anything, I would be concerned about the low idle dip, but even that shouldn't be too big of a deal. Obviously you don't know too much about cars.
Longway2fall 11 months ago
Comment removed
P71CVMAN 1 year ago
Comment removed
P71CVMAN 1 year ago
love the exhuast man... can't wait for tax season cause i'm getting mines cammed out too.... matter of fact when you put your cams in, did you do anything else to it while the heads were off?
mrvic2004 1 year ago
haha ok that is kind of cool.
CoonBabble 1 year ago
where did u get the cams from?
ryanchalmers58 1 year ago
An exhaust company named Stainless works is making longtube headers for these cars now and they are dead sexy!! look their site and order some up. We need more vics that sound like this.
jeepinjoe123 1 year ago
@jeepinjoe123 Dan knows AAAAALLL about those. lol He has custom longtubes currently because he wanted longtube headers way before Stainlessworks came out with theirs. He didn't want to wait on the inventor and at the time nobody had heard of them yet.
MrHotrodlincoln 1 year ago
@MrHotrodlincoln Yah that was moreso directed to other youtube comment readers i belive dan commented in the thread on crownvic.net though.
jeepinjoe123 1 year ago
4.6 cammed? or is that a whole different engine?
HOTROD74GremlinX 1 year ago
@HOTROD74GremlinX Yes it's a 4.6 cammed with these cams
hitech stage 2 cams
jeepinjoe123 1 year ago
@HOTROD74GremlinX /facepalm.
benidefelice 5 months ago
@benidefelice /middlefinger Oh I'm soooo sorry for my lack of knowledge on Fords Mod motor!
HOTROD74GremlinX 4 months ago
Man! Dat is shit is LegIT yO! Dey LeFt dA cOp CamZ in there 2?!?
cameron878 1 year ago
@cameron878 huh?
HOTROD74GremlinX 1 year ago
@HOTROD74GremlinX lol, let me translate for cameron878. Man! That is crazy man! Did they really leave the cop's cams in there too? lolololol
emgpickups1990 1 year ago
Bad guys will never fuck with this cop car!
walkingfreak 1 year ago
fuck man mcgarvie you should get that on yours.
xmatthewxlewisx 1 year ago
holy fuck where do you get bigger cams for crown vics?
oMcgarvie 1 year ago
man where can i find everything u put in ur car?
samsungsghd807 1 year ago
Hi tech stage 2 Pi cams, yes it has a aubrun pro series posi in it and yes ciffer i had custom long tubes made for it.
Danthevicman2 1 year ago
Fuck that is nasty! 100x better then 1/2 the lame cat back vids I see....
stilettolove88 1 year ago
Thats fucking epic.
kingjosh55 1 year ago
The nastiest sounding vic on youtube, you nailed it! I have a 2001 with no cats and flowmaster 40's, can you share what cam your using and did you do a swap to posi?
Jacques6977 1 year ago
what cams r thoes?
ryanchalmers88 1 year ago
you have the long tubes in yet?
ciffer25 1 year ago
@ Danthevicman1 what cam are you using???
mrcleanvic 1 year ago
هوووووووووك هذا الطرب This is fun
altimaa007 2 years ago
LOVE IT DUDE
DUVALNIGGA4 2 years ago
SOUNDS GOOD BRUH!!
CHEVYKILLA2000 2 years ago
SOUNDS GOOD BRUH!!!
CHEVYKILLA2000 2 years ago
hell yea that is crazy
i think you should use a different cam so we can hear the rev better.. badass
sl0wm03 2 years ago
Well SHIT!!! LOL i want to know my damn self
JuCJ86 2 years ago
Please please please tell us what cam you used. And what other preperations you had to make for the cam
mrcleanvic 2 years ago
I love it i want it!
sevill90e 2 years ago
Bad ass. I wanna do something similar to my '03 Crown Vic. What cam did you go with? Did you have to change to a different torque converter to accommodate the high lift?
haloguru2552 2 years ago
What kind of camm did u go with? I have a 03 p71
MultiCboy 2 years ago
dam ice on the bumper.
boobiesparxxx 2 years ago
Sounds great man, don't expect that sound from a crown vic! Nice!
jwmm04 2 years ago