what about for ps3 do you know? I tried everything for ps3 it doesnt work ummm.... it says nat type 2 but its on moderate and i tried every single port for ps3 and i enabled upnp
@sillyegoose try resetting your router by unplugging all of the ethernet cables from it and then unplugging it from the power source and let it sit for 60 seconds and then plug in the ethernet cable from your modem, the power, and any other ethernet cable you have, in that order
I have tried 192.168.1.2 ...3 ...4 ...5 ...6 ..7 and none of those works.. All just load long and then the "website" opens. (Totally white like i said)
Umm... It doesn't go to any webside when i write 192.168.1.1 Any help? The webside is totally white and there doesn't come any username password panel
hey quick question, i got the new 250 gig xbox, the connection is great always 3 or 4 bars, but i disconnected alot, i never had this problem with the old xbox and i dont know whats going on with it, any idea whats going on??
Hey I have embarq with a centrylink 660 modem. I was able to do everything but it doesn't offer me the tcp and udc or w/e they were. I can only put in the ip and start and end points. I still did all of them 88,80,3074,53. Is this still gonna help?
I have a question, why does it say open then an hour later its back to Strict? i restarted everything 4 times, made sure the IP address was the same and still there....wtf
@1214joel there should be a hard reset button on your router. if not, unplug all ethernet cables and power cables from it and wait about 2 minutes and then plug them back in
@bizznoi Thanks for trying helping me but i already fixed it... and bytheway i connected my xbox wirh a cable , its nor wireless. but thanks for reaction!
@cole3982 yes less security, Nat is often used as a firewall option, if you put your device on the DMZ you don't have to forward any ports, all ports for the device are opened
@ShadowSpeedy7 That is true but putting it on DMZ is MUCH less secure than just opening a few ports. Putting the device on the DMZ opens ALL ports, exposing it to anyone who looks, where as opening just a few ports you still have most of the protection; just a few ports are open to the internet.
umm. well, im really lost, no matter what i type in, it just says, ooopps, we could not connect to 192.168.1.1 or .2 or .3 soooooo what am i suppose to do? im with telus
@stev3thepirate 192.168.1.1 isn't a public IP address, Don't give out your public IP address, who cares about private ip addresses, you can't really do anything with it
@ShadowSpeedy7 i think you're agreeing with me....? but in anycase, to either disagree with you, or to reinforce your point, you can't do anything with 192.168.1.1, like "hack my computer" and all these other things that people are saying.
By the way sorry for double posting but how do i find my user and pass? my wireless thing is called "Alex Eckert" (my name) and it has no pass to connect but when i put that in it docent login
i can't open 192.168.0.1 or 192.168.1.1 or any of those :( i have a Dlink 265 (i think) and it aint working to open when i type it in the adress bar :(]
i tryed this and i did the number thing at the top of the browser and it didnt do anything it said webpage not found is this because im with google chrome?
i have the same netgear deal as you and when i put the ports in nothing changes and my nat stays strict. so idk whats going on but is there anything else i need to do to make it work ? i hate this shit so much. but would be awesome if ya get back to me thanks.
for some reason that first screen doesn't pop up when i put in my ip...my nat is closed on xbox and its pissing me off cause i cant figure this shit out to save my life
what about for ps3 do you know? I tried everything for ps3 it doesnt work ummm.... it says nat type 2 but its on moderate and i tried every single port for ps3 and i enabled upnp
lolumad97 1 month ago
i cant enter in my its 192.168.88.1 but it dosent work
eldinjusic10 1 month ago
ya cant log in no matter what i put for username and password
sillyegoose 2 months ago
@sillyegoose try resetting your router by unplugging all of the ethernet cables from it and then unplugging it from the power source and let it sit for 60 seconds and then plug in the ethernet cable from your modem, the power, and any other ethernet cable you have, in that order
stev3thepirate 1 month ago
Can you put the website address? We take a time to write it!
Ultragian 2 months ago
@Ultragian links are up
stev3thepirate 1 month ago
This has been flagged as spam show
I have the same problem as before, I followed exactly how it went, will you help?
I have netgear, the login you used didn't work for me I used my IP, 172.16.0.(number)
Went in did what you said added the 3 ports. It didnt work after that.
HumanManipulation 2 months ago
Comment removed
HumanManipulation 2 months ago
mine doesnt login mine is 192.168.0.1
AqwRedCrowImpulse 3 months ago
dose it work for ps3 ???
ovadabars 3 months ago
@ovadabars it might, but you night have to see if there are different ports that the PSN uses
stev3thepirate 1 month ago
@stev3thepirate i found out how i did it i bought a new router :L and it went to nat type two and change the upnp to disable and there's nat type 1
ovadabars 1 month ago
i cant login with admin admin, can you help me please?
NEzFiA 4 months ago
@NEzFiA try admin, password or admin, 1234
stev3thepirate 3 months ago
you helped me out alot! gave it a thumbs up :D
jggsunshine 4 months ago
@jggsunshine thanks!!
stev3thepirate 3 months ago
welp, i got linksys, gotta hit a differrent video......... again T_T
LokeeRider1 4 months ago
@LokeeRider1 doesn't matter what router you have. it should work just the same
stev3thepirate 3 months ago
@stev3thepirate ??? now i feel stupid >_>.
LokeeRider1 3 months ago
Guys listen. if i havent made a password for your router ypur paasword should be... password, 1234, or admin.
sjkthebeast 4 months ago
it wont let me have two things with the same name
marklandorelliot 4 months ago
will this work for ps3
Diagla217 6 months ago
i cant open the fucking website :(
xExpect 6 months ago
you will pay,if you do all that?
renatoziko 6 months ago
@renatoziko nope, its totally free
stev3thepirate 3 months ago
thx man.... its worked
YoungPlex 7 months ago
is this for free or you pay something more
DuDekilleR7 7 months ago
what was the password
IWishMyNameWasIggins 7 months ago
just curious why in the description it says TCP 53, UDP 53, and TCP 80?? isn't it just the other 3?
UNDERTAKER7473 7 months ago
this might help for me the password was password
xBillEggrollx 7 months ago
will this work for PS3/PSN
fatbrucelee77 7 months ago
Dude i have netgear to but when i logged in, i looked at advanced and i didnt have port forwarding and triggering bit what do i do????? HELP
nonofur1 7 months ago
how it know witch router to go to thats crazy shit.
Frankoharris1 8 months ago
its a good idea to run ipconfig.
start.
Run.
Cmd
ipconfig
write down the ip adress.
write that in your address bar
MrAOHgaming 8 months ago
thnx alot dude it worked all these other guys are asking the dumbest questions
danyaalbeg 8 months ago
I have tried 192.168.1.2 ...3 ...4 ...5 ...6 ..7 and none of those works.. All just load long and then the "website" opens. (Totally white like i said)
MrWinterking 8 months ago
Umm... It doesn't go to any webside when i write 192.168.1.1 Any help? The webside is totally white and there doesn't come any username password panel
MrWinterking 8 months ago
question why do u have in description that u need ports TCP80, UDP 53, and TCP53 if u did not talk about those ports in the video???
theshadowbeast13 8 months ago
Hi dude well im having a problem my nat Type is Open and its netgear n150 adsl2 and ip is 192.168.0.1 on my selection there is no Port forwading x:
can u help?
thanks
101dodobird 8 months ago
I honestly can't access the home page. Not even by typing 192.168.1.0 or 1
Whore crap...
ShutUpNtellMe 8 months ago
i have a bigpond router an cant seem to open my NAT would any one know how?
stevenmazzeo 9 months ago
hey bro... theres this thing called CamStudio... it will blow your mind...
CompletelyIdiotic386 9 months ago
@CompletelyIdiotic386 LOL!
TheC0DBrothers 9 months ago
192.168.1.1
VOIDKINGBLAZE45 9 months ago
hey quick question, i got the new 250 gig xbox, the connection is great always 3 or 4 bars, but i disconnected alot, i never had this problem with the old xbox and i dont know whats going on with it, any idea whats going on??
chaingang338 9 months ago
What if we don't have the port forwarding link at the beginning?
TheArchaebacteria 9 months ago
Comment removed
SH3RZ00 9 months ago
Now i have done what you said. But do i have to unplug my router and xbox or so, or should it be working right on the spot?
SH3RZ00 9 months ago
How to record my tutorials from my screen ??
prince28fx 9 months ago
I did everything had all of the exact numbers and it didnt work? i reset my router and modem still didnt work.... what do i do?!?!?!?!?
tolleyyy8 9 months ago
Hey I have embarq with a centrylink 660 modem. I was able to do everything but it doesn't offer me the tcp and udc or w/e they were. I can only put in the ip and start and end points. I still did all of them 88,80,3074,53. Is this still gonna help?
QuickSpoolin 9 months ago
I have a question, why does it say open then an hour later its back to Strict? i restarted everything 4 times, made sure the IP address was the same and still there....wtf
SnappiestExpertNiko 9 months ago
Comment removed
SnappiestExpertNiko 9 months ago
Comment removed
SnappiestExpertNiko 9 months ago
Comment removed
SnappiestExpertNiko 9 months ago
user name: admin
password: admin
MrAction21 10 months ago
Dude ur my christ. my NATS been bad for a while AND IT FINALLY WORKS! I LOVE YOU IN THE MOST NASTY WAY POSSIBLE!!!
(btw i mean that ina good way!!!)
squeaker119 10 months ago
192.168.1.1 or 192.168.1.2 or 192.168.1.3 doesn't work for me.
ESxLeGiT 10 months ago
Thanks Bro! This really helped! Everything else just simply says you need to do it and doesn't walk through it like you. Thanks!
Wh4tsUpDoc02 10 months ago
Seems to have solved the problem. I can finally play games online without getting pissed off. Thumbs up for you!
iamfoob 10 months ago
TY, NOW I NEED TO FIND ANOTHER WAY TO IMPROVE BANDWITCH FOR SOME REASON, TY, MY NAT IS OPEN :D
TheRandomCrap1211 10 months ago
it says the webite is wrong, PLZ HELP SOMEONE.
123razhan 11 months ago
so....why is mine still strict? do i have to unplug errthing?
oSketchMastao 11 months ago
WHY DOES IT ALL HAVE TO BE XBOX LIVE WHY NOT JUST FOR COMPUTER GAMES
Genocide2242 11 months ago
does this work for ps3?
puran2397 11 months ago
It was hard for me to find a video on the Netgear Router. Thanks.
TheFireyes 11 months ago
@TheFireyes Actually, this ended up disabling my connection.
TheFireyes 11 months ago
Hahaha epic noob filming his screen
Beresuke 11 months ago
I add the first two ports, but when I try to add the TCP one it says that it conflicts with other services and I cant add it :( help
lopzag 11 months ago
How do you reset username and password? cause its not letting me log in. I tried admin and leaving it blank, didnt work.
1214joel 1 year ago
@1214joel there should be a hard reset button on your router. if not, unplug all ethernet cables and power cables from it and wait about 2 minutes and then plug them back in
stev3thepirate 11 months ago
@stev3thepirate it would work, but none of the addresses work :l i went up to 9 and nothing
SnappiestExpertNiko 10 months ago
@1214joel test admin admin
CodPlaya3OnE 8 months ago
@1214joel try admin as your password worked for me
macdremacdre209 4 months ago
Thanks for the help
adambombs20 1 year ago
How would i find the router stuff for my Datzfast router? It gives me the Gateway but it wont bring anything up..
Shady4782 1 year ago
doesn't work, next video.
nextbest47 1 year ago
@nextbest47 it does work, you probably just did it wrong
stev3thepirate 1 year ago
i have a level one router WBR-6002 but i dot everything you said but it stays moderated
brocodo 1 year ago
@brocodo try resetting it and trying it again
stev3thepirate 1 year ago
@brocodo
1. go to network and sharing center/(manage network connections
2. right click your wireless connection
3. after you right click it.. go to properties (it will ask for permission)
4. it will be 2 tabs "networking" and "sharing"
5. go to the "sharing" tabnd make sure the box that says "Allow other users to connect through this computers internet connection"!!!
6. MOST IMPORTANT STEP! there should also be a "settings" box in the sharing tab. CLICK IT!!
only Allow the 3074 UDP
bizznoi 1 year ago
@bizznoi Thanks for trying helping me but i already fixed it... and bytheway i connected my xbox wirh a cable , its nor wireless. but thanks for reaction!
brocodo 1 year ago
does this work 4 ps3?
zavodakilla94 1 year ago
Is there a downside to having an open NAT?
cole3982 1 year ago
@cole3982 yes less security, Nat is often used as a firewall option, if you put your device on the DMZ you don't have to forward any ports, all ports for the device are opened
ShadowSpeedy7 1 year ago
@ShadowSpeedy7 true, but forwarding the ports used for xbox live service have never posed a security threat that i've ever heard of.
stev3thepirate 1 year ago
@ShadowSpeedy7 That is true but putting it on DMZ is MUCH less secure than just opening a few ports. Putting the device on the DMZ opens ALL ports, exposing it to anyone who looks, where as opening just a few ports you still have most of the protection; just a few ports are open to the internet.
joe12o 1 year ago
@joe12o for a pc yes, but for an xbox/ps3..ehh why not?
ShadowSpeedy7 1 year ago
umm. well, im really lost, no matter what i type in, it just says, ooopps, we could not connect to 192.168.1.1 or .2 or .3 soooooo what am i suppose to do? im with telus
r4mp4ge12 1 year ago
What if i'm using a mytouch 4g as my source for internet,
will this work too?
ahulau8080 1 year ago
@ahulau8080 not sure about tethering devices like that...
stev3thepirate 1 year ago
@ahulau8080 thats ghetto, lol
TheTylerb123 10 months ago
@ahulau8080 thats ghetto, lol
TheTylerb123 10 months ago
I have a Windstream Router/Modern. And I cannot find the name of it, any ideas?
Braxton905 1 year ago
My man dont give out your IP
paperpro3223 1 year ago
@paperpro3223 its not my actual IP address. thats what everyones standard IP is.
stev3thepirate 1 year ago
@stev3thepirate no shit..this is my brothers account he like 5
paperpro3223 1 year ago
@paperpro3223 oh haha my bad man
stev3thepirate 1 year ago
@stev3thepirate 192.168.1.1 isn't a public IP address, Don't give out your public IP address, who cares about private ip addresses, you can't really do anything with it
ShadowSpeedy7 1 year ago
@ShadowSpeedy7 i think you're agreeing with me....? but in anycase, to either disagree with you, or to reinforce your point, you can't do anything with 192.168.1.1, like "hack my computer" and all these other things that people are saying.
stev3thepirate 1 year ago
@paperpro3223 Great, someone whos heard a few terms but has no proper idea what hes talking about
MartyHITD 1 year ago
username:admin
password:password
SilentKiller8512 1 year ago
Yo!! Thank you so much Stev3!! You're a pimp for this tut....
DJe2unes 1 year ago
The password dont work
But there is not a usernaem i can just select
Help?
Jumpyousoon 1 year ago
the name of my router is called open range.. any idea on how to open the NAT on that?!?!?!?!?
ulquiorra031 1 year ago
Whenver I type that number in the URL, I dont get that little box... it takes me to Westell
MrLeft4DeadLover 1 year ago
mine keeps going to a site called actiontec what do i do about that?
AbominationPlan 1 year ago
my ip is 72.208.105.180.3704, what should i do?
icouldnthinkofauser 1 year ago
@icouldnthinkofauser you should never give out your ip its important
SilentKiller8512 1 year ago
gives me an error "port in conflict with other services" help plz? i use netgear
Tennispro349 1 year ago
i love you soooooooo much no hommo
MrMrHotmonkey 1 year ago
By the way sorry for double posting but how do i find my user and pass? my wireless thing is called "Alex Eckert" (my name) and it has no pass to connect but when i put that in it docent login
frown151 1 year ago
@frown151 so you tried using a blank password? how about using "pass" as a password?
stev3thepirate 1 year ago
2 any one who's internet get's messed up after doing this just unplug your router for around 30 seconds and then plug it back in.
frown151 1 year ago
I fucking love you man saved my ass best video for this shit AWESOME good info and easy to understand AWESOME
harley18chester 1 year ago
@HalovsCod895 HaHa
Yojerome303 1 year ago
did all this, and now my xbox won't even connect to live. Any suggestions?
frenchfry365 1 year ago
i can't open 192.168.0.1 or 192.168.1.1 or any of those :( i have a Dlink 265 (i think) and it aint working to open when i type it in the adress bar :(]
FagsMakesHistory 1 year ago
wat would be the password
MrCloudxyz 1 year ago
Yes i do, and I write my IP-adresse but I can't not open it.
it is (netopia router)
And i live in Danmark.
feriianne 1 year ago
@feriianne Danmark or Denmark, 0_-
HALOvsCOD895 1 year ago
I try but I can't not open my NAT. Can you plz help me???
feriianne 1 year ago
@feriianne well you have to describe what part isn't working. did you follow all the steps?
stev3thepirate 1 year ago
Yo thanks man i beeen tryna get that shit to werk for about a week
Default22100 1 year ago
@Default22100 np man
stev3thepirate 1 year ago
This help at pc mw2 to?
MrEpicTechno 1 year ago
@MrEpicTechno not sure, it might, just try using your computer's ip address instead of your xbox
stev3thepirate 1 year ago
thank you, im gonna try this now. im so tired of waiting for 3 hours before finding a gae.
MrPetter1000 1 year ago
u can see your IP adress at your connection status aswell on your pc
bramski4k 1 year ago
my UDP is 88,3074 does that work or do i have to take the 88 away
minioohs57 1 year ago
@minioohs57 i would take the 88 away, and make that a separate entry
stev3thepirate 1 year ago
FINALLY A TONSORIAL THAT WORKS!
RaptorGears 1 year ago
i type in the ip address in the search bar and it says failed to open page :'(
bradthornton123 1 year ago
does it work for ps3?
merchinmoney 1 year ago
i tryed this and i did the number thing at the top of the browser and it didnt do anything it said webpage not found is this because im with google chrome?
theskaterconvict907 1 year ago
what does dis do
yomoma809 1 year ago
@yomoma809 speeds up your Xbox live connection and reduces lag and helps to find games WAY faster
stev3thepirate 1 year ago
i tried with admin ... admin and PW ... nothing ... and just pw WTF shall i do
jonessoneel 1 year ago
1. for pc
2. buy an router if u dont got
3. plug in new router and replace it with old one
4. happy :D
ketsh123 1 year ago
why my computer's ip address is different from my xbox ip address
leo5aries 1 year ago
@Mvp0131 there will be a setting the side there that will have the nat on it that is where you can open your nat up
Carmiel08 1 year ago
this didnt work for me! i have tried everything but it doesnt work!
77josereyes 1 year ago
is nat type affected by how fast ur connection is? plz answer
vogosvagen 1 year ago
@vogosvagen no it shouldn't. NAT is just how well you allow your internet to connect to others on xbox live
stev3thepirate 1 year ago
idk what my pass is
kaRmaFTW1 1 year ago
@kaRmaFTW1 try leaving it blank?
stev3thepirate 1 year ago
does this also work for the pc CoD Mw2 ?
Zeninka666 1 year ago
@Zeninka666 im not sure about the pc
stev3thepirate 1 year ago
Do the last 2 ports need to have the same name?
provacativemoose 1 year ago
MY ip is 10.0.0.1?
dwadeheatify 1 year ago
Ok I did all that but do I click on one? And the last two "3074" are they Upd and upd or udp and tcp?
coldnhot369 1 year ago
@coldnhot369 udp and tcp
stev3thepirate 1 year ago
is this the same way with a MAC or is there a different way?
bball4life140 1 year ago
@bball4life140 yes. i am running everything on a mac
stev3thepirate 1 year ago
Theres a link on Xbox dot com that says "53, 88, 3074" not "80, 88, 3074"... Whats up with that?
thomaspvh 1 year ago
@thomaspvh And I also didn't have an option to type in an IP address when I did this.
thomaspvh 1 year ago
I just wish my NAT wouldn't randomly switch from Open to Strict. Why the hell does it do that?
I can just wait a week or two for it to switch back to Open, but it's just so annoying!
vulnerabledonkey 1 year ago
i dont have port forwording help?
CodGlitchesHD 1 year ago
thanks
OxnardGamer 1 year ago
How do you do this with a windows 7 computer??
CarbonAce1 1 year ago
i have the same netgear deal as you and when i put the ports in nothing changes and my nat stays strict. so idk whats going on but is there anything else i need to do to make it work ? i hate this shit so much. but would be awesome if ya get back to me thanks.
NOTORiiOUS6 1 year ago
i think when u open your nat you open your internet connection for other people isn't that right?
Bericnl 1 year ago
i made 3 different custom services... is that right?
fhooy0402 1 year ago
if i dont know my password were do i get it?
fhooy0402 1 year ago
@fhooy0402 do not type anything on the user and try admin as your password its the default for some.. or try admin for both
CheeCheeDamian 1 year ago
for some reason that first screen doesn't pop up when i put in my ip...my nat is closed on xbox and its pissing me off cause i cant figure this shit out to save my life
weslee420 1 year ago
What's the difference between NAT scrict Modern and open? I mean i don't know how to do it so im gonna say to a m8 to help me
0wn4g3Ghost 1 year ago
wont work cuz under automatic there is 2.2 not 1.2
d00d6699 1 year ago
How did you name the udp and the tcp the same name for the 3074 port number?
ih82red 1 year ago
@ih82red theresthree options, TCP, UDP, and both TCP/UDP so its the last one
stev3thepirate 1 year ago
@stev3thepirate Plz help when i write admin nothing happend they just keep asking me whats the username and passwoord :s
rockabdechafi4ever 1 year ago
@rockabdechafi4ever try leaving both fields blank
stev3thepirate 1 year ago
@ih82red there should be a third option, instead of TCP or UDP there should be an "TCP/UDP" option
stev3thepirate 1 year ago
Thanks man I can connnect to my friends now.
ih82red 1 year ago
any one have a netopia router?
ForGetIttt 1 year ago
When i tryo to save i get this error
ERROR:
Port element xbox360 has conflict with internal
Web-TCP service 80,
Either change pinhole port or redirect Web Port.
r4g1ngb34st