How to make Simple Custom Stefan darts for unmodified nerf guns

[GruglikesMinecraft]

Do they work for clip system guns?

[AutoJunkieMan]

if you took out the AR pegs in the Maverick shouldn't have to hollow them out?

[TheMrchance244]

thnk u this works really well

[Samuraikidd271]

OR you could just mod your blasters and takle out the dart post.

[johnrodney68]

nice maverick paintjob



[AlloutAdam]

They are named after a guy on the nerf forums that supposedly invented these homemade darts. Stefan.

[Zoopism]

Do you know where we can get the caulk saver in the UK?

I have tried home places/DIY shops (such as B+Q and wicks) but found nothing ):

[hwynjongotti]

i just hav one question. why?

[JRAmw3man1]

if u take out your ARs out of your gun u wont have to make a hole

[bluedude265]

did u mod ur maverick

[bluedude265]

do u really need food color

[achaser100]

a stefan is a homemade nerf dart made from foam backer rod for all you who were asking

[Jmac12346]

Wat is a stefan dart lol wat a noob

[ggjoe723]

What is a stefen dart

[GameStar2604]

Yes it does work with a nitefinder

[spike123411]

if you cut the rod out of the inside of the of the barrel, you just need the foam. A little bit less acurate. but a lot less work

[bargunner18]

high

[connor12mac]

This seems awesome haven't tried ur method yet but very different from mine.

[IVIoNk3YzZ]

will this work with my nite finder?

[guyugkuyg]

@IVIoNk3YzZ I've used a different method that worked with nightfinder, and i have to say it was very inferior to this, i admit that the nightfinder is probably one of the most versatile nerf guns when it comes to ammo, the maverick is probably 2nd tier for compatibility.

[1990cujo]

use low heat glue gun not high

[gamemaster932]

does foam backer rod work?

[SFAirsofter]

would these work, with out the hole, in a modded longshot?

[MegaJohn334]

@SFAirsofter yes

[ashanp64]

that suck i did that and it didnt work that was a wast of my money

[maplestoryproblems]

I am selling nerf stefan darts check out my video about them :) Thanks

[rpsgiverteller]

Ya just remove the AR's

[versatilechicken]

rather than waste time butting holes in the darts, why not just remove th AR's?

[krisakitty]

Do you think that these would work for a Raider cs-35?

[MultiSascha123]

were can i get a tutorial for how to modify my nerf gun ,answer pls

[DeadLemonz]

@MultiSascha123 Youtube.

[stawar10021]

@MultiSascha123 lord dracs channel

[MECCWUK]

i just have to ask, is it cheaper to make these darts then to buy stock darts?

[freeridemtb2]

@MECCWUK If you already have a glue gun then I would say yes. I bought the foam for about 5 bucks at the hardware store, and I got a ton of darts made. You are only using a tiny bit of the glue stick each time so one 99 cent stick will last for a long time. figure like 6 bucks for 80 or so darts

[mindfreak7481]

I like the playdough idea for tips but I get the whole through the dart a different possibly easier way put the darts through a cycle in your clothes dryer if it's the right foam it'll make then a bit more rigid the put then in your maveric and the pin thing in each chamber will punch the whole then add your tip

[sparkster48]

if its melting the dart then the gun is to hot (duh) but you need a low powered hot glue gun and it wont melt it

[SaintCheerio]

if you heat up a nail with a lighter then stickit in the foam it will go faster.

[dipper3567]

@SaintCheerio Well kids dont have lighters. Jeez comon sense

[JR23631295]

can i prop the top off a streamline dart and use it???

[freeridemtb2]

@JR23631295 Yes you can. I get the velcro and suction cup darts from people who don't use them and modify them to become stefan darts. Just cut the tip off and use the hot glue gun

[khanthtet1]

can i use in clip for long strike cs-6

[deaserteagle9]

Is there any way to make stefens work in a streamline clip???

[freeridemtb2]

@deaserteagle9 Sometimes they do, sometimes they don't. The stefans are a bit too soft to work reliably in a clip, but I have fired them before.

[stringuy1]

well whats it gonna save my cock from ;D

[SmishZiggy]

How big is the FBR?

[freeridemtb2]

@GeneralTausif you don't have to remove the air restrictor

[freeridemtb2]

@GeneralTausif its posted in the info at the top of the video

[NTS1700]

You mixed up on the testing of the darts. You filmed it backwards.

[DemoDude87]

How well do these darts work on clip guns

[DemoDude87]

Sorry one more thing how much does that poly foam thing cost and where do I get it

[freeridemtb2]

@DemoDude87 about 4 bucks, lowes home depot or hardware store. Its used for insulation

[DemoDude87]

Sorry one more thing how much does that poly foam thing cost

[DemoDude87]

Oh and how well do they work with the raider or the barricade

[DemoDude87]

@LukeKeister813 thanks dude now I can make new ones

[DemoDude87]

If I shot someone with it would it hurt badly

[LukeKeister813]

@DemoDude87 nope

i made some and i me and my freinds were having a nerf war and i got shot in the cheek and it stung alitle worse then the reqular dart.but not really

[ExtremeCampbell]

awsome maverick

[jplemaf1]

can i get it in office depot?

[cod4haloadict]

point blank range to the head ouch!

[unscspec123]

epic!!!

[chaddach12]

0:06 Poly foam cock saver

[sunp]

is it possible to use puppy glue?



[username11160]

can i buy your stephans

[nunchuck19]

glue sticks, hot glue, glue. which one should i use???

[freeridemtb2]

@nunchuck19 hot glue

[02154a]

@freeridemtb2 what if we dont have hot glue would just reg. glue work

[legoboy37]

could you like spray paint them??

[freeridemtb2]

@legoboy37 I would stay away from spray paint because it might come off and ruin the mechanisms in the gun. Also the chemicals in spray paint eat up anything made of foam. I would recommend using dye instead.

[wolfblade89]

Oh and good vid i subcribed and liked

[wolfblade89]

these are for unmodified guns right

[freeridemtb2]

@wolfblade89 I designed these darts for use in unmodified nerf maverick guns. In other words, these will work in a gun right off the store shelf with the air restrictors still in place. This would have been a much easier task if the air restrictors were removed, but I figured most people wouldn't want to pull their guns apart.

[wolfblade89]

@freeridemtb2 yeah good point i opened my longstrike and i couldnt put it back together

[freeridemtb2]

@wolfblade89 After I "modified" my first maverick, I found the shooting ability to be about the same as before I modded it. I decided to make better ammo for the stock gun. Now I just paint the guns intact and don't bother tearing them apart

[freeridemtb2]

Please see the video description for the instructions on play dough

[Devilkid3641]

whats the recipe for the play-dough

[Syntaair]

effective!!

[maxcam100]

how do you get the the poly foam cualk saver strait?

[freeridemtb2]

@maxcam100 after you poke the hole with the straw, it usually stays pretty straight. I bent it by hand if it seemed to curve. Other tutorials suggest putting you darts in a pillow case and throwing it in the dryer on medium heat for awhile. It didn't seem to make a difference in mine.

[freeridemtb2]

@bluesnake5280 about 10 minutes, it doesn't really need to freeze, I just wanted to cool them so they weren't sticky.

[nerfninja45]

Can you use something other than hot glue. Like wood glue?

[freeridemtb2]

@nerfninja45 not sure, I think you could use anything, but hot glue dries quick

[nerfninja45]

@freeridemtb2 thanks where can i get foam backer rod in australia

[NobleThief]

Dude, love the paint job on the Mav! Nicely done.

[freeridemtb2]

@NobleThief glad you like it. My other video has a different mav paint job too. I might do a simple paint tutorial video soon.

[ZabeNech]

This method takes forever! But a great Idea, so you get a thumbs up for that!

[XxJorchxX]

good vid

[sk8trfan123]

When he did the firing test, stock dart fired stefan and stefan dart fired stock

[TheSnipershooter13]

can u just use regular plah doh? cause i have tons of it

[freeridemtb2]

Yeah, It would probably work better to use factory made play doh, but I don't have any kids around and I didn't feel like buying any.

[MegaShot4]

Do these darts shoot faster than the stock Nerf Streamlines? I know they shoot far, but are they fast?

[freeridemtb2]

Yeah, they are faster too. They don't weigh nearly as much as a standard dart so they tend to fly very quickly.

[NammyBoys]

nice video. loved it =). very good at explaining =). i might start trying to make stefans next week. =)

[freeridemtb2]

Salt Playdough

Materials * 1 cup salt * 1 cup water  * 1/2 cup flour plus additional flour * Saucepan

Directions 1. Mix salt, water, and flour in saucepan and cook over medium heat. 2. Remove from heat when mixture is thick and rubbery. 3. As the mixture cools, knead in enough flour to make the dough workable.

[XlFruitLoopslX]

btw please tell me what the recipe is.

[freeridemtb2]

It is tedious, but it was the only way to get darts that were perfectly consistent. I make hundreds of tips in one big batch and just store them. Then when I am watching TV at night I can drill holes ( about one dart per minute now) Then you can hot glue a whole bunch at a time. Its not too bad.

[XlFruitLoopslX]

Nice... but seems tedious... I bought the exact same stuff, but for some reason, my 1/2 inch ones seem smaller than regular darts.

[ThaiL6]

gooooooood vidio