PMR Ultralite and Lucky Board with Spitfire Installation

[Bluepopo001]

Could fry ur board from magnetic screwdriver

[St1ives]

How much is the spitfire board for the imagine

[Ghettonerd101]

where are the dip switches?

[Ghettonerd101]

can you post a video on setting the board

[jizzbombjon]

does the ul frame already come with a board?

[PBplayer1202]

yea

[gotmini]

what barrel is that ive never seen it b4

[MikeBurns315]

That would be a lucky Un1tec barrel.

[DefaultS1]

Is it hard to install the UL frame by yourself?

[CubanPaintballer]

no. its easy

[DefaultS1]

K thank you.

[MychaelRyanLepur]

can u put a virtue baord on the ul frame

[CubanPaintballer]

yes just use a dm6/7 virtue

[SnAkEsidE]

the only reason i watched it is because it shows how to put a UL Frame on

[PrimeraG20]

Lucky needs to get back into business. stupid fucken brits. i wanted some wired eyes from Lucky since they are so thin.

[Crkodawn1]

go on ebay

[prestonburns]

howd you get the macro out of the asa? i cant ever get it out. lmk.

[garythis]

you push up on the front of the macroline and pull

[Wecanhelp]

hold in that ring on the fittings

[prestonburns]

figured that out thanks.

[pbHepitonic]

What kind of barrell is that?

[weyderwarr]

a 11" or something i believe

[fattydude101]

unitech

[littledevilbmx9]

i really dont like this guy this is a bad tut like some of the things he says and the way he explains things just pisses me off 1/5 stars

[Paintball7575]

Can somebody else do a tutorial he covers the gun most of the time. Also do i just pull hard on the eye wires to get them out???

[pbis4men]

how much is a lucky board?

should i keep my pmr and supe it up or get a ego?

[SnAkEsidE]

no lucky blows you dont want anything from them their customer service sucks

[protomatrix15]

sup the PMR up i put a tech t bolt a ul frame and 2-peice ul barrel and the thing runs like itS A GOD

[JEWDOOMAGIK94]

lol because that prolly the most godlike things you can put in a PMR

[JabberJaw578]

i agree with paintballa i hate lucky

[paintballa44k]

i hate lucky

[K1nGKooPaPaintball]

wat kind of eyes would i need for the pmr?

[K1nGKooPaPaintball]

i forgot to add that im getting a ul frame so wat kind of eyes will i be needing for the new frame

[protomatrix15]

you can stay stock or go with virtue laser eyes

[paintballer1055]

soo confusing

[paintballfreak678]

yeah...

[fireball4008]

emmm, why is there only 3 leaves on the clover, it needs to be four to be a lucky clover...

[achuck4321]

I think cause the 4 leaf clover is a trademarked symbol...DAMN YOU LUCKY CHARMS!!!!

[sitris184]

the wires for my batteries disconnected n i was goin 2 get the ul frame anyway so do u think dye can send me a new one or will it come with it? plz reply

[paintballfreak678]

it doesn't come with it, I know it sucks man! but guess what!!!!! YOU DON"T NEED IT!!! hope you figured it out by then!

[bringdapaininPB]

what size allen key do u need to take out the asa?

[CanadianSlackerz]

3/32 allen key i believe

[CubanPaintballer]

i just got the ul frame and virtue board and i was woundering if i could use the dm6 and dm7 eyes. i got them in a deal and you said that you can use wire eyes?

[CubanPaintballer]

if i am putting on just the ul frame not the new eyes or anything like that do i still have to take off the eye covers and all that?

[AndrewYari]

yo greeat video by the way im getting a ul frame for my pmr ut where do u buy spitfire and how much is it???

[piemiester]

i bought the frame at the shop, and they installed free. also, what barrel is htat?

[kidtaouk]

just send it to a shop lol

[Dracanic]

lol dude... dont send ur gun to a shop ever... half the fun of the sport is being able to fix it on field.

[fireball4008]

LoL! not all the time man, lol not all the time...

[ErIcK305]

damn ut fukin patient...lol...helpfull video..thx!

[ananymous100]

trust me if u don't know how to remove all the parts with ought breaking it or even if u do know a bit just take it to a paintball store and ask them alot of times they will know how to do it because i have lost a gun that way it was a proto matrix rail and it got messed up so just ask the gun store

[shockerwvirtue]

hey by the way i wount use a magnetic screw driver if you get it too close to certain parts of ur board it might fry them

[Pezdetz666]

thats BS, and almost NEVER happens. PLease, i have built 6 computers and my dad is an electronics engineer who designs air force flight systems. We use magnetic screw drivers all the time, and if it wont fry a multi-million dollar circuit, it wont hurt your shitty $120 board...

[shockerwvirtue]

first of all y did u say "almost NEVER" happens if you were so confident that it wouldn't fry a marker board. and second don't you think multi million dollar circuits would use better supplies that aren't affected by magnets. and lasty have you put a magnet up to a board??...................... get back to my on that

[Legitwolfpack]

an how did u take out the screw in the asa its practically glued to my gun that i cant take it off

[Legitwolfpack]

how do you take of the hose do u just pull it off the asa?

[pdmko]

yh u just pull the macro line out

[crazy15mini]

for the UL frame on the PMR, do you have to buy the DM6 boards now or the regular PMR boards??

[DOARevenge]

hey do u guys know anything else to do with the pmr cause i have got a new trigger...tech t l7 bolt...ultralite barrel...new back cap....virtue board and eyes.....and a new feed neck...i dont know wat else to do with the thing

[hierohead831]

seriously should i get a pmr, or an invert mini? and why? pleeeez respond!

[pmrcrazzy]

you should get a pmr so much more durable and fast for a stock. go pbreviews if you want a better but search the gun name first and say reviews

[freekracer09]

pbmaniac08... your a poser... you probably never even shot a pmr... I PLAYED MY FRIEND THAT HAS AN EGO!!! I KICKED HIS butt... HE LOVES THE SHIT OUT OF MY PMR W/ UL FRAME... So you have nothing to say if you havent shot the pmr...

[pmrcrazzy]

does any one know what ramping or raming means?

[savagepaintballer9]

ramping is when you pull the trigger 3 times then if u maintain 5 bps at least it will shoot however fast u want it to shoot, psp ramping is same thing but it has to be capped at 15 bps

[JTD93]

Ramping.. Adds extra balls once you reach a certain BPS (Ball per second) :)

[SpeedSpartan24]

yeah, but now theres a deal on Actionvillage that lets u buy a UL frame for $25 when u buy a PMR.

[mostdanger]

you spend 700 on a gun that will be just as good as a dm7 for like $500 less why the hell not do it its a better deal

[BluePepper0]

pbmaniac08 ur deff a 2k7er, i mean the pmr dosent even have an lpr... let alone the dm7's improved lpr which lets its run way below 200psi, which makes it a ton easier on paint and quieter. and hell that was only the lpr i went over, not the whole freakin gun.

[pbmaniac08]

this is pointless DONT BUY THE UL FRAME! ur pretty much just buying a fuckin DM7 or something...lets just say PMR alone = 400 UL frame = 200 and bored = somewhere prob aroun 100 so u spending fuckin 700 dollars...whats the fuckin point? just buy a DM7 or some shit...

[stolein45]

once u put a ul frame on a pmr its basicly a pm7

[blinkdrumer808]

man i just dropped my gaw at9:06 when you dropped the gun...lol

[eXyleNcE]

hey im getting a whole new setup. i have about850. i need a hopper nitrous gun mask!im decidin between the pmr promaster or maybe an ion. please mess me back

-thnxx

[FLoOoOoO666]

get the pmr , an ion tuned for 500 bugs does not reach the pmr at all ... so pmr is the best alternative

[paintthug]

how many lucky board have you installed?

[xcom23]

hay do you need the eyes bord and chip to install it?

[austinpowaz]

should i get the ul frame with the pmr its only $25 extra if i get it together

[Bloodwake14]

LOL

obviusly... most popular upgrade on the gun.... andif u buy them there like 200 bucks

[Mempker]

can you put the virtue board in the stock PMR frame?

[ianmad16]

hey does the ul frame come with the wire harnesses (battery/microswitch etc.)?? mine broke and i think ill just get this if it has it.

[ftpaintbolla]

the special edition PMR is sick.............

[bbbanana]

yo dude, nice vid.. great but long but it wasnt suppose to be entertainin more for like info. anywayz i got a pmr n im thinkin of buyin a UL Grip.. should i? its so expensive? isnt the pm7 board gud(dosnt it come wit it wen u buy it) n so is dm6.. but dont need it do we?

[achuck4321]

don't buy the UL frame, it's heavier. the PMR one is more for looks really.

[thugginGEARS]

*check out my video*

[Rhorlex]

the most important thing u need on this marker, is a new back cap. without the backcap u don't have access to the bolt and then the gun will just die. Back cap, ASA, new trigger, barrel ( optional ). but the PM6 is better in quality, but for the money its a pretty good marker.

[sickofsin]

Is the lucky board better than the virtue board?

will either board make it faster?

[AGGpaintballa]

of course you need the backcap but why would you spend money buying a new one!?!?! and a new ASA? the dye airport is great and the triggers are nice, and the UL triger is amazing....but yes the pm6 is much beter quality, im down with that

[jaymello]

im a noob and just starting pb so wt does a board is and i keep on hearing virtue board wt is this??? and wt does this spitfire chip do

[pbballer2323]

i was wondering i am thinking of getting either a pmr or a pm6 i dont know which one to get and is the pmr grip thick please reply

[ionsexy]

hat is better a ion or pmr?

[muRd0X]

pmr

[dannypaint1]

pmr

[P8ntb4ll3r]

So then I can put a virtue DM7 board in that since the Ultralite uses dm7 boards?

[sk8erandp8er]

when you think of it thrs not alot of perts to the pmr

[davidveltri101]

nice thnd with the pmr all you need is a new barrel and for look new trigger ne grps and a dye asa and your set

[p4l04]

is the dye ultralite board better than virtue or its the same as the dm7 or dm6

[muRd0X]

its the same as a DM6/7 board but not better than a virtue

[HiphopFredie]

Virtue is shit... Tadao is better

[p4l04]

is the dye ultralite board better than virtue or the board is the same as dm7 or dm6

[wareagle3421]

mini is gay spend 300 more and get an nxt

nxt ftw

[BALEROF00]

the invert mini is way better oput of the box and u really dont need to upgrade anything. Iwent to a comp with a rail and it wasnt to good i ended up using my friends mini and it was awsome. ireturned my pmr and got a mini. the mini is just simply better

[CPSkate]

The dogtags were a nice addition too... This way when the bolt flies out the back of your Mini and kills you, they can Identify your body ;)

[paintballerseraph]

did you use the battery clip that came with the stock board or did the ulframe come with one

[SEANF912]

my back cap became stripped and it would unscreww every time i shot i put locktite on it and it fixed the problem. but now when i try to take the bolt out the back cap comes out and thats it?

[TheLuckyTech]

I made sure the trigger was how I wanted it before reassembling it, but its possible to get more range without the rubber stub.

[chillaxorz]

didnt you forget to remove the rubber stub on the solinoid to allow for better trigger adjustment?

[TheLuckyTech]

You can't install these laser eyes on the stock board Spyder21092. Sorry.

Pico59 - Sorry but it's not for sale.

[Pico59]

feel like sellin that pmr to me with the eyes and ul frame and lucky board??

[speedsterm99]

i dont know what u r talking about half of the time

[spyder21092]

lets say you install the light eyes on the stock board, will the light on the grip frame still turn red or green when something is in the breach?

[APLT0521]

hey,

i already have my ul frame installed on my pmr but i can't get the macroline hose out from the fittings. got any pointers?

[crunkburrito]

the fitting has a piece that has to be pushed in to get the line out you hold it in and then pull the line

[Torhec75]

Lucky rules!!!

[Halbrooksv2]

Lucky PMR, very nice.

[redbullpaintball]

i love u lucky