Sounds good, but looks like it is running a little fat. What did that stingy dyno read when you were on it? On that very same dyno on a 95*F day my 5.7 Hemi Ram with the only mods being headers and catless duals with SCT 93 tune by me made 285/301 on a 2nd gear pull.
somone had their facts wrong. about the hemi. they only dyno at 240-260 at the wheels.. idk about the newer ones. but every stock hemi on youtube dyno'd has been in the 240-260 range STOCK so this truck with a bad pleneum putting down 230 is a achievment.. fix that and you prob be running wut a stock hemi is doing! im curious wut my ram will run. 97 ss/t with a fed mods but 211,000 miles so idk...
hey man, i want to get edelbrock headers for my 2001 ram 5.9L. i have a flowmaster 40 so i just need headers. so my question is, if i get them will they fit to factory exhaust or will i have to get another Y pipe?
hey so on your exhaust what did you do for the 02 sensors? if you deleted the cat and ran straight duals from the headers or did you get the aftermarket y pipe cat delete and how much power gain did you get out of it?
O2 sensors are just put in the pipe with welded on threaded bungs on the passenger side pipe. It has true duals and had two carsounds cats, one on each side of the trans, but gutted them both when one cat broke loose after only a couple thousand miles, said eff it was tired of dealing with the cats anyway. As for how much power I dont know it was never dynoed before/after, but felt a good seat of the pants increase at mid/upper rpm.
I might have some more vids this year. Things have been really tight and havent done much of anything in a long time, but Im starting something new and hoping that finances will settle back out soon.
hell haha, this ones just sick lookin' idk y wish i had it lol i just stuck a hypertech max energy on mine and a trick flow tbs and k&N fipkII system and it'll get up now but i'm planni' on better heads, tranny w/ titanium geras and shift kit then idk
Can you give a little bit of info about the suspension this truck is running? and did you have to remove the inner fender wells to run a drop this low? it looks sick and I might want to put my Indy down this low with some good suspension so it can handle the curves good :)
Yeah I'd like to bag the truck and get it that low but the truck is a sentimental piece and I dont want to hack it up so I'll stick with the simple sporty drop. I've done a few body mods but nothing I couldnt change back to stock with a grinder and a paintjob lol.
It still looks nice with the drop it has now...I have a drop but I have NO idea what it is...If you get a chance take a look at one of the vids of my truck and see if you can tell me how low it is? Purty Please haha....Anyway great Truck man!
5.7 hemi engines are great and they have made the top ten best engine list since they came out. 5.2 or 5.9 are realy great engines, i have one myself but they never made the top ten engine list
ok i have a ram i have the one wheel peel to ihve heard positive traction can get rid of it i also want to chamge the gear ratio do u like the 4.10 also how do u like the lsd and where did u buy the thanks for the help
Auburn LSD unit is about the best you can get. I've got about 60K miles on mine and it's just now needing to be rebuilt. 4.10's are perfect for these trucks as well I wish they came factory with them, I have 4.10's in both my Rams. Truck feels a thousand pounds lighter on the throttle around town.
Numbers are in the first comment here. As for the HS's I have not run them yet but plan to when I build the 408. I have heard they are the best ones made for the Magnum engines.
They are just stock Dodge SS/T or Indy Ram rims. They'll run you about 650 a pop at the dealership new, but you can find decent used ones online for around 150 each. The drop is a 2-4 BellTech with Nitro-Active shocks.
2-4 BellTech drop, Hood was a Harwood Industries hood but they no longer make it (mine doesnt fit, nor the other two they gave me, and a month ago they said they were no longer going to re-mold it, they were dropping the whole thing and refund my money) Id recommend a Reflexxions Cowl hood anyway. Tires are Toyo Proxes ST 285-60-17's.
That dyno brings back memories. Briefly, what were the stats on your runs and where did you take that 5.9L on the tach. My 5.9L builds all sorts of torque and ponies until it finds the 5600+ rpm range then falls flat on its face. That's the stock cam of course. Nothing else stock though including the 46RE.
i have a dodge ram, and is there something i need to do when i take the cats off? i was told that it will run too rich and it will actually perform worse
Nope it wont change the fuel mixture the pre-cat O2 sensor adjust the Air Fuel mixture. Only problem you MAY see is a check engine light from the POST-Cat O2 sensor telling the PCM the cat's performance is out of spec, but neither my 96 nor my 2000 Ram ever threw a CEL for the missing cats. The Rams run a bit rich anyway cat or not, it's just that you can see it better on the dyno without the cat because the dyno's test probe is getting an untainted sample of exhaust gasses.
very nice u should run my 2000 dodge ram 1500 5.2 i love running against 5.9's the only one i havtn beat is my friends 99 ss/t he says he asnt added anything on it since he bought it but i say its bull cuz they come stock with like 350 horses and with all the stuff i have on my truck i dyno at 390
SS/T are just a stock ram with 5 more HP, SLT package, different exhaust, Rims, Stripe Package, and I think they had a a bit different suspension setup (shocks, swaybar, springs if I remember correctly). Nothing too special about an SS/T. They came stock with 250 HP, whereas the normal truck came with 245 HP. Mine dyno's about 285-290 HP at the flywheel. This netted me a best of 15.1 quarter mile time. Since then I have fixed a leaking plenum and added and SCT Tuner to the mix.
a i have a 2002 5.9 ram(the first year they changed the body) and i was wondering if u have the same rear as me because i was to lookin to chang the gears to 4.10s like u have
Look on eBay or Craigslist for Dodge SS/T or Indy rims. These were off a wrecked 97 Indy Ram that were re-finished. If you go through the dealership, the price each was about 650 a rim, that's been a couple years ago, since two of mine have been replaced due to my wife having two wrecks in that truck.
My 340 in my duster sounds the same way on the down rev.! That truck really sounds healthy considering you just did some "bolt on" mods. Imagine what it would do if you got a little deeper into it. Bad-ass!
Thanks! Im slowly getting it dialed in. May 10th I ran at Mopars at the Motorplex. Only could muster up a 15.1 all stock engine with some bolt ons. My SCT Tuner took a shit the night before so I STILL dont konw what kind of gains the SCT will get me. I'll find out eventually as I now have a recovery program to salvage my stock PCM, just gotta have time to load it and see if it works.
Dodge dealer for about 650 each. Or, if you are really lucky, eBay or Craigslist, and will most likely spend about 100 each for torn up cracked rims, and spend another 125 each to have them repaired and refinished. Got mine in 2000 for 75 each, all four cracked and beat to hell, and had them redone. Since then two have been replaced from wrecks with brand new rims from Dodge.
Toyo Proxes 285/60/17's all around on Dodge SS/T or Indy Ram rims. Be aware though, that these rims and tires do not work well with the 2000 and 2001 Rams because the front suspension changed those two years. Your front rims and tires will rub the lower A-Arm badly. I had to put steering stop bumps on my lower A-Arm to stop it from turning as far so it wouldnt ruin my rims.
two Flowmaster 50 single in/out 2.5" mufflers on true dual exaust. And the ride is rougher meaning its alot stiffer than stock, it bounces you around in your seat alot more, big bumps will almost make you come up out of the seat lol.
Most of its listed in the About This Video nomenclature. Only things I have planned not listed are either to get Harwood to get me a hood that fits, or build my own custom hood (which I'd rather do since I have a KILLER idea), and possibly a Gaylords low profile tonneau cover. I do plan to do an upper half two tone of some sort, thinking Kandy purple, Tangelo, or Kandy Pearl Lime, once the body work is how I want it. Just need the time to do it!!!
Remember, that's rear wheel values. Add about 22% to those numbers for driveline loss, and you'll have about what the engine's putting out at the flywheel. About 280 HP and 392 ft/lbs from a totally stock 360 that's running rich and a blown intake plenum gasket. And runs 8.9's in the 1/8th, probably a very low 14, high 13 1/4 mile time, havent had it in the 1/4 yet though so dont know where it's at currently. Still faster than a stock Hemi Ram!
with only 228 at the wheel your no where near a stock hemi. stock hemi's put out around 270 at the wheel. I've got a lightly modified ram hemi regular cab (vids on channel) and i run the 1/4 in the mid to low 14's uncorrected (13's corrected for DA) on 20's with the stock 3.92's. Im at about 310 or so at the wheel. Your a long way off from stock, but even still i wouldn't venture to say your faster than a stock hemi ram (especially the regular cabs). Nice truck though. go dodge!
Yep, it burns alot actually. Bout 4 quarts every 3K miles. Im almost certain I have a badly blown plenum gasket on the intake. Keep putting it off but one day I've gotta do something about it. Kept thinking I'd be pulling the engine sooner, but a new baby 9 months ago ruined almost all my car and truck hobby plans for a while. For now Im just tinkering.
If you're to spend the entire video showing the truck runninig on the dyno,you could at least post the results..LOL
kasmanien 3 weeks ago
nice vid. id love to get my 5.2 on a dyno. check out my vid
95ram1500 1 month ago
When you say crossover in the description what do you mean? And do you have shorty or long tube headers?
98D0dg3Ram 5 months ago
Sounds good, but looks like it is running a little fat. What did that stingy dyno read when you were on it? On that very same dyno on a 95*F day my 5.7 Hemi Ram with the only mods being headers and catless duals with SCT 93 tune by me made 285/301 on a 2nd gear pull.
Fast355 9 months ago
somone had their facts wrong. about the hemi. they only dyno at 240-260 at the wheels.. idk about the newer ones. but every stock hemi on youtube dyno'd has been in the 240-260 range STOCK so this truck with a bad pleneum putting down 230 is a achievment.. fix that and you prob be running wut a stock hemi is doing! im curious wut my ram will run. 97 ss/t with a fed mods but 211,000 miles so idk...
dodge2289 9 months ago
hey man, i want to get edelbrock headers for my 2001 ram 5.9L. i have a flowmaster 40 so i just need headers. so my question is, if i get them will they fit to factory exhaust or will i have to get another Y pipe?
alore57 1 year ago
So how many ponies?
452films 1 year ago
here we go again, another dyno video with no numbers.
vecci23 1 year ago 3
That truck is wimpy
raptor660cc1 1 year ago
yeah i just took the cat off with a ypipe inseart increase in all around power!!!
dodge2289 1 year ago
nice truck man sounds mean whats the numbers?
fordklr350 1 year ago
AWESOME TUNE!!
banshee107 1 year ago
hey so on your exhaust what did you do for the 02 sensors? if you deleted the cat and ran straight duals from the headers or did you get the aftermarket y pipe cat delete and how much power gain did you get out of it?
PH3NOM3NON03 1 year ago
O2 sensors are just put in the pipe with welded on threaded bungs on the passenger side pipe. It has true duals and had two carsounds cats, one on each side of the trans, but gutted them both when one cat broke loose after only a couple thousand miles, said eff it was tired of dealing with the cats anyway. As for how much power I dont know it was never dynoed before/after, but felt a good seat of the pants increase at mid/upper rpm.
RamThisDTO 1 year ago
This a speedtek?? No hp numbers??
Nasty92cummins 1 year ago
god i love the sound. how many RWHP did u get?
ironman2561 1 year ago
no BHP posted at end of video?
solofalcon 2 years ago
think u cld do a video of this one runnin' down the road? haha.
Sasquatch2010 2 years ago
I might have some more vids this year. Things have been really tight and havent done much of anything in a long time, but Im starting something new and hoping that finances will settle back out soon.
RamThisDTO 2 years ago
Can you tell me where to order that Trans-Go Shift Kit? I can't find one to save my life man.
Sasquatch2010 2 years ago
Jegs or Summit carry them, I think APS Precision can get them too, or Martin Saine Transmissions who makes an even better valve body than trans-go.
RamThisDTO 2 years ago
i want this truck so bad haha. it's so mean lookin'
Sasquatch2010 2 years ago
@Sasquatch2010 i love these trucks
thore022 2 years ago
hell haha, this ones just sick lookin' idk y wish i had it lol i just stuck a hypertech max energy on mine and a trick flow tbs and k&N fipkII system and it'll get up now but i'm planni' on better heads, tranny w/ titanium geras and shift kit then idk
Sasquatch2010 2 years ago
if you cant dodge it, ram it
Tylerfromak 2 years ago
Can you give a little bit of info about the suspension this truck is running? and did you have to remove the inner fender wells to run a drop this low? it looks sick and I might want to put my Indy down this low with some good suspension so it can handle the curves good :)
Indyram360 2 years ago
It's just a Bell-Tech 2-4 drop kit.
The opening pic is a photoshop of it slammed tough so dont go by that.
RamThisDTO 2 years ago
Ah the wonders of photoshop lol looks sick tho!
Indyram360 2 years ago
Yeah I'd like to bag the truck and get it that low but the truck is a sentimental piece and I dont want to hack it up so I'll stick with the simple sporty drop. I've done a few body mods but nothing I couldnt change back to stock with a grinder and a paintjob lol.
RamThisDTO 2 years ago
It still looks nice with the drop it has now...I have a drop but I have NO idea what it is...If you get a chance take a look at one of the vids of my truck and see if you can tell me how low it is? Purty Please haha....Anyway great Truck man!
Indyram360 2 years ago
how did you get your truck so low i got same truck wich im currently putting in a 360 and i put in a 4/3 drop and yours looks lower?
goordoon24 2 years ago
God man, I wld give my left nut for that truck. I mean, my dodge is nice, but that one is what i'm lookin forward to havin someday.
Sasquatch2010 2 years ago
not a hemi. didn't put em in those years. 360 magnum
rocky440 2 years ago
Much better than those 5.7 shit engines
1977F150408 2 years ago
5.7 hemi engines are great and they have made the top ten best engine list since they came out. 5.2 or 5.9 are realy great engines, i have one myself but they never made the top ten engine list
Moparman58 2 years ago
is that a hemi
bubbasmiles 2 years ago
Comment removed
LMTDiana 2 years ago
how much power did it make?
Moparman58 2 years ago
Comment removed
amermuscle 2 years ago
Comment removed
amermuscle 2 years ago
is that a speedtech in haltom city,tx?
zdeckich 2 years ago
Sure is!
RamThisDTO 2 years ago
Awesome truck. Sounds whicked too!
F150TuffTruckman 2 years ago
badass truck. mines a stock 5.9 reg cab short bed 4x4. shes itching for performance parts.
ircdytna92 3 years ago
whatcha puttin down to the ground tq and hp...I just took my truck to the dyno to get retuned
mightymikes1 3 years ago
ok i have a ram i have the one wheel peel to ihve heard positive traction can get rid of it i also want to chamge the gear ratio do u like the 4.10 also how do u like the lsd and where did u buy the thanks for the help
strawz1 3 years ago
Auburn LSD unit is about the best you can get. I've got about 60K miles on mine and it's just now needing to be rebuilt. 4.10's are perfect for these trucks as well I wish they came factory with them, I have 4.10's in both my Rams. Truck feels a thousand pounds lighter on the throttle around town.
RamThisDTO 3 years ago
you can get a 4.10 w/ posi cheap at a junk yard.or findonne online or locally
fallend3ath 2 years ago
Comment removed
amermuscle 3 years ago
Numbers are in the first comment here. As for the HS's I have not run them yet but plan to when I build the 408. I have heard they are the best ones made for the Magnum engines.
RamThisDTO 3 years ago
and how many inches did u drop it?
fatty1818 3 years ago
2-4 drop
RamThisDTO 3 years ago
hey i got the same truck, i like those wheels. what are they called? and how much were they?
fatty1818 3 years ago
They are just stock Dodge SS/T or Indy Ram rims. They'll run you about 650 a pop at the dealership new, but you can find decent used ones online for around 150 each. The drop is a 2-4 BellTech with Nitro-Active shocks.
RamThisDTO 3 years ago
Love the sound of this Ram. Reminds me of the street stocks that run at my local speedway.
Matt2003z71 3 years ago
you should make another vid on the street man i like to see it rollin
furious530 3 years ago
thanks bro
furious530 3 years ago
No Problemo!
RamThisDTO 3 years ago
2-4 BellTech drop, Hood was a Harwood Industries hood but they no longer make it (mine doesnt fit, nor the other two they gave me, and a month ago they said they were no longer going to re-mold it, they were dropping the whole thing and refund my money) Id recommend a Reflexxions Cowl hood anyway. Tires are Toyo Proxes ST 285-60-17's.
RamThisDTO 3 years ago
3 questions how many inches in the front and the back 3"/4"? were did you get the hood? and last whats the tire size?
furious530 3 years ago
dodge ss/t was only 97-98 and the indy ram was 96 so there is no 99 ss/t
dodge2289 3 years ago
@dodge2289 this! im glad im one of the lucky ones to have the sst. its a great truck! will not sell it haha
averyrayne 2 years ago
That dyno brings back memories. Briefly, what were the stats on your runs and where did you take that 5.9L on the tach. My 5.9L builds all sorts of torque and ponies until it finds the 5600+ rpm range then falls flat on its face. That's the stock cam of course. Nothing else stock though including the 46RE.
needncash 3 years ago
how many gears it have?
daviddrd11 3 years ago
4 Speed Auto. 46RE Transmission, basically a new version of the bulletproof 727 TorqueFlite with an OD added in the tailshaft.
RamThisDTO 3 years ago
i have a dodge ram, and is there something i need to do when i take the cats off? i was told that it will run too rich and it will actually perform worse
xPR3TZ3Lx 3 years ago
Nope it wont change the fuel mixture the pre-cat O2 sensor adjust the Air Fuel mixture. Only problem you MAY see is a check engine light from the POST-Cat O2 sensor telling the PCM the cat's performance is out of spec, but neither my 96 nor my 2000 Ram ever threw a CEL for the missing cats. The Rams run a bit rich anyway cat or not, it's just that you can see it better on the dyno without the cat because the dyno's test probe is getting an untainted sample of exhaust gasses.
RamThisDTO 3 years ago
very nice u should run my 2000 dodge ram 1500 5.2 i love running against 5.9's the only one i havtn beat is my friends 99 ss/t he says he asnt added anything on it since he bought it but i say its bull cuz they come stock with like 350 horses and with all the stuff i have on my truck i dyno at 390
brandolee07 3 years ago
SS/T are just a stock ram with 5 more HP, SLT package, different exhaust, Rims, Stripe Package, and I think they had a a bit different suspension setup (shocks, swaybar, springs if I remember correctly). Nothing too special about an SS/T. They came stock with 250 HP, whereas the normal truck came with 245 HP. Mine dyno's about 285-290 HP at the flywheel. This netted me a best of 15.1 quarter mile time. Since then I have fixed a leaking plenum and added and SCT Tuner to the mix.
RamThisDTO 3 years ago
all that work for only 40 more hp.....
chinchillawrangler 2 years ago
a i have a 2002 5.9 ram(the first year they changed the body) and i was wondering if u have the same rear as me because i was to lookin to chang the gears to 4.10s like u have
Thanks
mythbuster74 3 years ago
Sick as truck, i got a 95 myself. Where can i get myself a set of those rims? please reply, cuz i love those things.
beans328 3 years ago
Look on eBay or Craigslist for Dodge SS/T or Indy rims. These were off a wrecked 97 Indy Ram that were re-finished. If you go through the dealership, the price each was about 650 a rim, that's been a couple years ago, since two of mine have been replaced due to my wife having two wrecks in that truck.
RamThisDTO 3 years ago
check out ebay or a good salvage shop thats where i got mine
brandolee07 3 years ago
nice ive got a 99 v10 weve had since new weve beat so many lightnings and mustangs
CodyLee6969 3 years ago
yeah ford blows
brandolee07 3 years ago 6
yeah but i dont drive the truck much anymore now i drive my moms viper she gave it too me not too long ago so now i murder fords
CodyLee6969 3 years ago
Man, that's a bad truck. I love just the way it looks. Bad....
Sasquatch2010 3 years ago
My 340 in my duster sounds the same way on the down rev.! That truck really sounds healthy considering you just did some "bolt on" mods. Imagine what it would do if you got a little deeper into it. Bad-ass!
L324RT12 3 years ago
Thanks! Im slowly getting it dialed in. May 10th I ran at Mopars at the Motorplex. Only could muster up a 15.1 all stock engine with some bolt ons. My SCT Tuner took a shit the night before so I STILL dont konw what kind of gains the SCT will get me. I'll find out eventually as I now have a recovery program to salvage my stock PCM, just gotta have time to load it and see if it works.
RamThisDTO 3 years ago
down rev sounds bad ass! You can sure tell that its an "LA" based engine!
L324RT12 3 years ago
Yeah I've always liked the idle down crackle it has, especially with no cats and true duals lol.
RamThisDTO 3 years ago
how does this shift kit work for you???
d213danny 3 years ago
Great. Shifts hard and fast. It shifts so hard at part throttle it makes my dash creak lol.
RamThisDTO 3 years ago
yea you can tell by the way it shifts on the video seems really good, were will i be able to find one like this???
d213danny 3 years ago
also where can i buy those rims
lupecolts 4 years ago
Dodge dealer for about 650 each. Or, if you are really lucky, eBay or Craigslist, and will most likely spend about 100 each for torn up cracked rims, and spend another 125 each to have them repaired and refinished. Got mine in 2000 for 75 each, all four cracked and beat to hell, and had them redone. Since then two have been replaced from wrecks with brand new rims from Dodge.
RamThisDTO 4 years ago
the truck in getting is a 95
lupecolts 4 years ago
hey ram this what size are those tires you have on that dodge im getting a single cab this weekend and i want that tire size on the truck
lupecolts 4 years ago
Toyo Proxes 285/60/17's all around on Dodge SS/T or Indy Ram rims. Be aware though, that these rims and tires do not work well with the 2000 and 2001 Rams because the front suspension changed those two years. Your front rims and tires will rub the lower A-Arm badly. I had to put steering stop bumps on my lower A-Arm to stop it from turning as far so it wouldnt ruin my rims.
RamThisDTO 4 years ago
which model muffler do you have and about the 2 4 drop what do you mean by rough
lupecolts 4 years ago
two Flowmaster 50 single in/out 2.5" mufflers on true dual exaust. And the ride is rougher meaning its alot stiffer than stock, it bounces you around in your seat alot more, big bumps will almost make you come up out of the seat lol.
RamThisDTO 4 years ago
what do you mean rough ride, like on the bumps
lupecolts 4 years ago
hey what drop do you have on this truck
lupecolts 4 years ago
2-4 BellTech with Nitro-Active shocks. Rough as hell but looks bitchin'. At least I think it looks bitchin lol.
RamThisDTO 4 years ago
What do you plan on doing to the cosmetics of this truck? Anything like your 96?
98RamMagnum 4 years ago
Most of its listed in the About This Video nomenclature. Only things I have planned not listed are either to get Harwood to get me a hood that fits, or build my own custom hood (which I'd rather do since I have a KILLER idea), and possibly a Gaylords low profile tonneau cover. I do plan to do an upper half two tone of some sort, thinking Kandy purple, Tangelo, or Kandy Pearl Lime, once the body work is how I want it. Just need the time to do it!!!
RamThisDTO 4 years ago
only 228,,i figured it would be alot better than that,, sounds good and looks like its running good too..
jriddle1974 4 years ago
Remember, that's rear wheel values. Add about 22% to those numbers for driveline loss, and you'll have about what the engine's putting out at the flywheel. About 280 HP and 392 ft/lbs from a totally stock 360 that's running rich and a blown intake plenum gasket. And runs 8.9's in the 1/8th, probably a very low 14, high 13 1/4 mile time, havent had it in the 1/4 yet though so dont know where it's at currently. Still faster than a stock Hemi Ram!
RamThisDTO 4 years ago
with only 228 at the wheel your no where near a stock hemi. stock hemi's put out around 270 at the wheel. I've got a lightly modified ram hemi regular cab (vids on channel) and i run the 1/4 in the mid to low 14's uncorrected (13's corrected for DA) on 20's with the stock 3.92's. Im at about 310 or so at the wheel. Your a long way off from stock, but even still i wouldn't venture to say your faster than a stock hemi ram (especially the regular cabs). Nice truck though. go dodge!
ttuguy1983 4 years ago
lloks like it burns a little oil?
exhaustfreak08 4 years ago
Yep, it burns alot actually. Bout 4 quarts every 3K miles. Im almost certain I have a badly blown plenum gasket on the intake. Keep putting it off but one day I've gotta do something about it. Kept thinking I'd be pulling the engine sooner, but a new baby 9 months ago ruined almost all my car and truck hobby plans for a while. For now Im just tinkering.
RamThisDTO 4 years ago
chrysler v8s always sound the meanest. the have a very authentic american v8 bellow.
gajda1984 4 years ago 4
so true
MoparMan16 4 years ago
nice iv got a ram too. what year is it 1999 2001 ?
fallenskater729 4 years ago
sweet dude i like it
amermuscle 4 years ago
Thanks! I got more plans for this truck through the year. Hope to have some MUCH better dyno videos by end of the year.
RamThisDTO 4 years ago
How many miles do you have on the motor and tranny? Sounds good! What did you run on the dyno?
Vette31991 4 years ago
85K miles.
Showing 228RHWP and 321RWTQ at about 22% driveline loss.
Thanks!
RamThisDTO 4 years ago
Very nice sounding truck!
Vette31991 4 years ago