Overunity Generator Pulse Motor type 2

[subhankar3716]

well I must say one thing......the quality of video is good....and the information it contains is just amazing------

The government Cover-Up with regards to Free Energy Technology

Just go to Google and Search for: Top Magnetic Generator -- Click the First Result

The evidence will shock you - you'll see for yourself even

a Video from on someone that build magnetic generator

[HHOcowboy]

Really enjoy watching your videos .. What I’m curious about is the type of wood you use to build your motors/generators with ...

[Steven715715]

Very good and very intresting thanks for good vidios. I have subscribed. Keep up the good work. Kind Regards Steve

[stuwie911]

These ideas can change the world, Do not be sold out brother, continue to spread ideas and ingenuity. OIl will become a thing of the past, so will Coal, Solar, Wind and all other Earthly physical forces. In my research these Ideas represent Einstien's Equation for the Cosmological Constant. Which is what free energy really is. Tapping into actual physical energy, like fuel, is coming to an end. but there are obstacles. Basic knowledge and communicating these ideas is the key to overcoming these

[puddle331]

a mad english scientist :D i am not alone :D

[newage4energy]

Perhaps overunity is hard to fathom for even engineers and mechanics. It takes alot of rehearsal. My simplest one shows that mathematically it is possible but not enough to end the energy crisis.

[MEMmaker3]

Can you do this fer US spoiled Americans lol ... mm? Got ta git me ma conversion rule out ... From an ole board draftsman to an other ... GREAT job! Mike in Maine USA

[altium1]

I cannot see overunity in this video.

[AshManXP]

"Powerfuller"?

[LiamXaoh]

As soon as I see the term "over unity" I smell a rat. No one has ever produced evidence for over unity.

[PropheciesofWar]

Can you provide an image link to the template that you are using for the generator?

[itsthetooth]

Oh I just watched another one of your vids and commented on it. I made reference that you should make the magnets closer to the coils and I think in this one your saying not to have them to close because of cogging. Am I hearing it right cogging? Is this where it would have hard turning points, almost like its sticky? Also I noticed you were referring to clockwise and anti-clockwise. I’ve never heard that. Here in the states we say counter-clockwise. Not dogging you, love your work.

[guillermuss]

HAS ANYONE HEARD ABOUT CONSERVATION OF ENERGY?

[henrykay01]

I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.

H. Tomasz Grzybowski

tel. +48-512-933-540

[Daclaem]

thanks for sharing , very interesting

[LUKAAA1]

Where can i buy free energy device. Does anyone know?

[larryllix]

@LUKAAA1 Energy is free everywhere. Sun, wind, water falling and your imagination is the limit.

You probably want a device to convert all this free energy to useable energy and that costs money to buy and to maintain.

[JRBeaman]

@LUKAAA1:

You can't. There is no such thing.

All these devices convert the energy into different forms, but none provide 'free' energy.

They claim they do, hping someone like you will spend money. Other than that, they are only really interesting projects.

[berrypossum]

@LUKAAA1 In Fantasyland!

[SpeedRacerTerri]

Thank you for showing how simple it "really" is. I have 5 motors at my disposal and have been stumped on which one to use for my windmill to reduce my electric bill. Have RV experience so "familiar" with hookup except this part. Thanks!@!

[bucketrobbert]

me again doing a single phase motor how do i wind it is it clock-wise / counter-clock-wise coils like yours are is it all clock wise please help

[theDaftman]

Please direct you question to me on the forum that way we can look at what you are asking for more closely.

Because the info in this video is for an alternator and not a single-phase motor so I dont understand what info youre asking for.

[larryllix]

@bucketrobbert This depands onhow many magnet poles are on the other half.

Usually generators of good design use coils on the outher shell (stator) and magnets on the inner core (armature).

Think about how you are going to make your connections from a rotating part to a cable going to circuitry.

Oh and don't use non-ferrous materials. It makes a very poor efficiency anything. Ferrous metals focus the lines of magnetic force.

[latasha66]

Awesome! I always wondered what was meant by "4 poles" in reference to how motors are wound... so I guess it is fair to say that a 6 or 8 pole motor would have 6 or 8 coils in series around the circumference of the motor in alternating clock-wise / counter-clock-wise coils per phase? now I want to go make something....

[larryllix]

@latasha66 A motor could be considered 4 poles and have many more coils. If every second one were in series or parallel (operating together simultaneously) then the eight coils would only make a four pole motor.

RPM can be calculated by the number of cycle change per minute divided by the number of poles. Each time the AC cycle changes polarity it draws a new pole to it.

[wiebeben]

From where did you get that print off.

[theDaftman]

I set it out on my computer. Sorry no download. Yet.

[Fredericrochette]

thankx for the beautiful video!

[thesimulacre]

Looks top notch.

[theDaftman]

Comment left by DonHoraldo

"anticlockwise is most important" wow you a moron. the winding isn't affected by the direction it was wound.

______________________________­_____________

Now I have listened to your comment and thought I would put your theories to test and rebuilt the unit again. After the 4th time you are wrong the wire must follow the orientation of the magnets. Now Ive tried your theories the time as come for you to try my proven theories. Thanks for your comments.

[MYxLOVExOFxBEER]

Did the broken English guy really call you names? Please don't be destracted by such people, your uploads are so important to people like me. If you say it must be wound as such, then that's good enough for me & plenty of others I'm sure.

[DancingSpiderman]

@MYxLOVExOFxBEER "Did the broken English guy really call you names? "

i gree. Don't listen to Tarzan, Tonto and Frankenstein. They will only confuse the issue.

[DonHoraldo]

"anticlockwise is most important" wow you a moron. the winding isn't affected by the direction it was wound.

[theDaftman]

Hooo isnt it maybe you can show me how its done, I like to have constructive help thanks, and I must say I like all your gaming videos they must send your mind daft from time to time, A.

[DonHoraldo]

I have some experience with stators from wind mills and ass long as the coils are wound tight and wired right directionality is not a concern.

[theDaftman]

All I can say is Ive worked on commercial wind turbine generators. From design ,construction, implementation, even field repairs. You will find that if you want them to work to the most efficient then it is very important. And it will also depend on the type of generators you need. This design is worlds standard and sold in kit form on the net and used in most 3-phase generators. Now single phase maybe to a point you are right but not 3 phase.

[theDaftman]

Just build one my way then one your way and see the results. I have 4 times, before I posted the above video I wouldnt post it if there were any chance I was wrong.

[DonHoraldo]

you expect me to spend my money and invest my time to make not one but two paperweights.

[theDaftman]

I dont expect anything at all. Im not getting in to a debate over this you do things your way I will do them my way. I dont expect anyone to follow my footsteps. This video is only on youtube because I got a lot of feedback asking me to do so.

[DonHoraldo]

and that has what to do with your knowledge of electronics and orientation of such.

[DonHoraldo]

I have made 3=phase. the fact remains winding direction doesn't mater as long as the device is wired correctly.

[theDaftman]

Now I have listened to your comment and thought I would put your theories to test and rebuilt the unit again. After the 4th time you are wrong the wire must follow the orientation of the magnets. Now Ive tried your theories the time as come for you to try my proven theories. Thanks for your comments.

[DonHoraldo]

give one actual difference.

[logdogfrog]

@DonHoraldo Yeah, dude. The magnetic field from a coil is given by the right hand rule. Way to not know physics.

[HomeDistiller]

with no steel in the gen you will have ZERO cogging... cogging is caused by steel

[dapop1001]

Hi daftman, I dont need the transfere, i figured out how to determine the 12 even holes. I still cant get on to teep! I thought i might have made a typo the 1st time so i used my sons e-mail address and tryed again but it still wouldnt let me on. I made a generator to go on my motor but am only getting .45 volts from it. Shouldn't i be getting more? Thx for the help

[dapop1001]

hi daftman, Where can I the transfer to print? I tryed to get on to teep but it says some1 already has my name. I will try again. thx

[Mefoo007]

Wow, Don't stop making vid's! so Informational and spoken so a lamen can understand. Been a subscriber for a while and would hate to not see more vids from you as you mentioned in your last Vid.

[theDaftman]

Sorry for my delay in replying.

Thank you for your comments it is appreciated.

Will be loading some videos up soon.

We now have a forum where one can discuss are work, please join us.

Teep(dot)i8(dot)com

Or please see link to the forum in description on the right of this video.

[mcorrade]

AS always a superb video and nicely done. I have a real dumb question. Why the three phases? Couldn't I just build the same thing but only using one continuous wire but still doing the same lat out as you've show? If I wanted to make just a generator and not an alternator which I'm guessing is the reason for the three phases...

[theDaftman]

Sorry for my delay in replying:

Thank you for your comments it is appreciated.

Yes you can just build a single phase has you say, maybe I will do a video on this soon.

We now have a forum where one can discuss are work, please join us.

Teep(dot)i8(dot)com

Or please see link to the forum in description on the right of this video.

[mcorrade]

thanks for the reply. It would be great to see that. And I'm a member of your forum already but haven't been there in a while. I'll stop by and see what's been going on......

[ammanninox]

Great explanation. It is my second time I understand anything about electricity explained on a video. For an electronics moron like me this is a success. Keep it up.

AMOX

[theDaftman]

Sorry for my delay in replying.

Thank you for your comments it is appreciated.

[sirHOAX]

You are an inspiration to us all. Thanks for providing this information, been looking forward to winding my own alternator windings. This helps provide in-site to how it appears to be complicated but it really is rather simple.

Now we know! Can't wait to see your quest for HHO. The funny thing is, you will need to know how to wind the alternator for "true" HHO interaction with the engine.

Look forward to more of your videos.

Regards, --S--

[theDaftman]

Sorry for my delay in replying:

Thank you for your comments it is appreciated.

If you have worked on car alternators you will know that the output before the regulator/rectifier in the alternator is 48 volts AC well some are different but that may give you some idea where I'm going.

[BeefyCrackers12]

so if the coils arent wound a certain way they wont get any voltage or current?

[theDaftman]

Sorry for my delay in replying:

Thank you for your comments it is appreciated.

Well they will but will be all over the place and inefficient.

[theDaftman]

Note to all that have asked this is a well established 4 pole radial air core alternator used in wind turbines it as 4 loops for each phase. So that's 12 loops in total. The 4 magnets align with the 4 loops in each phase. NORTH SOUTH NORTH SOUTH.

[theDaftman]

I abandoned conventional theory with this project. I went with what others have had good success with, so this project was just copied work. I just looked at the best bits that people had proved worked and put them all together as one unit to see if it would work. And I have had good success with it but not outstanding.

[Drevtoobe]

I am not sure if you may be extrapolating some Joe Newman theories about wire length to your three-phase generator coils, but permit me to state some conventional theory about generators as they apply to your discussion.

If you have a single closed loop, Lenz's law states that current will flow in the loop as a magnet passes by. If you then make that a double closed loop, then 1/2 the current will flow when the magnet passes by, 3 loops then 1/3 the current, etc.

[Drevtoobe]

The more loops of wire, each loop will generate it's part of the magnetic field that resists the magnetic field from the magnet. You add all of the parts together, and they come out equal to the magnetic field that would be generated by a single loop of wire.

That ties in with the "more loops, higher voltage and less current" principle for a generator.

This means that one primary factor that determines the nature of the output from the generator coils is the number of turns of wire.

[Drevtoobe]

It is not really the length of the wire per se, although that defines the number of loops.

Also, increasing the thickness of the wire will have a negligible affect on the output from the coils. It will decrease the resistance of the wire, but not really affect the voltage or current output from the coils.

The three big factors determining the nature of the output from the coils are 1) the number of turns of wire, 2) the strength of the magnets, and 3) the available mechanical energy.

[Drevtoobe]

The available mechanical energy is the shaft RPM's times the torque.

The interesting thing is that a generator with 10 turns per coil and a generator with 50 turns per coil will output exactly the same amount of power if the magnets and the mechanical power are the same.

The generator with 50 turns will work better with a load with a higher resistance because it generates higher voltage. The generator with 10 turns will work better with a load with a lower resistance.

[Drevtoobe]

This is called "load matching" or "impedance matching" between the power source and the load.

Think of this example: You car has a motor that always produces the same mechanical power. In first gear you get low speed (wheel RPM's) and high torque (foot-pounds). In fifth gear you get high wheel RPM's and low torque, for the same output power in both cases.

Choosing the number of turns in the generator coils is like deciding if you want to run in 1st, 3rd, or 5th gear.

[Drevtoobe]

As the designer of the generator, it is up to you to decide how many turns of wire you want to use for your generator coils.

There is also an easy trick to make the generator look like it has many more turns than it really has.

Suppose you want to make a generator that acts exactly like a generator with 1000-turn coils. You don't have to wrap 1000 turns of wire around the stator frame. You only have to wrap 100 turns, and you connect the output of the coil to a standard 12-volt transformer.

[Drevtoobe]

In North America we use 120 VAC mains power so a 12-volt transformer has a 10:1 turn ratio.

You connect the output of the generator coil to the "12-volt" side of the transformer. The transformer will output 10-times the voltage and 1/10th the current on the "120-volt" side.

Therefore the output from the transformer will look EXACTLY like it was as if the generator had 1000-turn coils, with the added benefit that there will be less effective wire resistance in this configuration.

[theDaftman]

Drevtoobe thanks for your input always appreciated, good info good theory I've read comments you have left on youtube videos like this one and I find them most interesting thanks.

[Drevtoobe]

Hey DaftMan permit me to plagiarize myself:

Hey thanks for your kind comments. I am just having fun myself, armchair style. I am an ex engineer drawing on my knowledge from way back when. It's nice when someone benefits from a comment or two.

Being a person of good values, I can be offended by money-making scams in this field and sometimes my tongue gets caustic. It's only towards the people that I believe are outright thieves and con artists, like Searl and Steorn, to name a few.

[Prinzmagnon]

Fascinating stuff! I look forward to the next installment.

[jidun]

Yep, very good. Easy to understand and, I can't hardly wait for the next video. 5 stars.

[MoonSpyStudios]

As always such a pleasure to watch,, your videos are always informative and with purpose. Thanks daftman for all you share with us :)

Bill- N.e.R.d.

[mochiam]

Thank you !!!!!!

[Pwordchernoir]

Daftman, mate, I cannot thank you enough, that really cleared some things up for me. I've been having problems getting enough current out of my generator coils. I can get what seems at the moment to be an unlimited build up of voltage in my caps but not enough current to really drive anything useful for any length of time. Take a look at some of the videos, I intend to make newer and better coils. If you have the formulae as you mentioned in the video, I reckon I could put it to good use. Cheers

[zeropointprophet]

your voice reminds me of Michael Kane the actor, very calming to listen to :)

[zeropointprophet]

great job!! Daftman...you always impress me with your work great job!! 5 stars!!