hmm mine does this to but i have a gamcube game it is resident evil and it says disc error read the gamecub operation manul for information but there 2 disc of it the 2 plays but the frist one is not playing ? DX
Often, when this problem occurs, whenever the system continues to try to read the disc, it will eventually give up, and give you the "An error has occurred" message.
clean lens with q-tip and then keep trying game. eventually it will read. if not then clean lens a two or three times and let it dry. it will work. maybe the tuffest game system ever made.
i had that problem, the lense is not adjusted right. you need to get a flat head screw drives and turn the lense until it reads the game. I fixed it up like that and sold it for a whole 5$ :D and you could have sold it for 40$ if you just did that simple process. If you know luke who lives in japan on youtube he made a vid of the process. But anyway did yuo get any oney out of the system or did yuo concider it as worthless and throw it out?
something like this happens to me with my blue gamecube. I can play games for a short wile. but then it stops reading and i get this error thing. But i have a black gamecube. Also my sliver one is busted too.
@SuperShad0vv same thing hbappened to me when i wanted to play mario kart dubble dash. I was racing at luigi's cuirct for a while, and when i'm done the race, boom error has occuerd. but on gamecube.
hey, listen, I've got the solutions to your problem.
This probles is cause your game ( I sure) is another norma of your nintendo gamecube. for example: sure your GC is ntsc and your game is pal, well, playstation 2 can read another normas games, but in black and white (algo es algo = something is something).
Well, you have to do is to install de chip "xeno" in your gamecube, this chip make that your gamecube can read games backup ( juegos piratas o truchos) and unlock de norma (pal/ ntsc).
When I used to have my gc I had no problems with it like that srry all I can tell u is that u can try and clean the disk I don't have my gc anymore cause I have a wii and I play the gamecube games on it
seeking help- i cannot play any gc on my wii or my gc because everytime i try to select a chapter on the game the cursor just goes up and down the screen and doesnot stop! plz help
how long have you had your gamecube? im assuming its 6 or 7 years old. when a gamecube consle is 7 years it doesnt read the disk anymore. same thing happened to me and ive had it for 7 years :\ when i first found out it was dying i was playing sa2b and while i was in the Green Forest level my gc froze and made an "EEEEE" like sound and it stayed like that until i turned it off and then when i turned it back on it wouldnt read the disk D:
I fix my daughter's gamecube. I've removed the lens and believe it or not, I even wash it with a little bit of my soap dish just slight and rinse and dried it with this little fabric for eyeglasses. I put the lens back to its place and some angle here and there, restarted the cube at every angle I meant, everytime I move the lens to find the exact angle, listens at every spins cuz noisy spin means laser still can't read the disk
i had the same problem with my first gamecube, i contacted nintendo and they said something was wrong with a chip in the system and wanted $70 to fix it. i simply just bought a used gamecube off of ebay and it works fine
I had the same problem a trick to fixing it is get a 1 dollar game put it in the gamecube for test DONT USE A GOOD GAME put the game in and turn the gamecube on and off realy fast if done perfectly it will read the disk but if you have ever cleaned the INSIDE of it it had skrathed te laser that reads the game it is broke
I think you need to contact Nintendo about this problem. Or you can contact the store where you bought the GameCube. I never owned a GameCube but I hope this will help.
Right now,ALL my game(exept for mario party 5 aqnd sponge bob square pants battle...... and PARTIALY sonic heroes((becaause only the title screem pops out)) Work) Are Broken, Im Getting new ones, but if i cam fi em, please pm me the way.
i tried doing this and got great results. i cleaned the laser with a dry q tip or swab in a circular motion sort of like a buffer, then sprayed some wd40 on a qtip and rubbed it on the part that is holding the laser inside on the right hand side. worked great and have no problem playing games.
@Zeethr : actually, it's not the laser you cleaned, it's just the lens..:). The laser is inside and it just goes through the lens that is why it reads the disk. It's what in my opinion.
@ZeldaTwinkle8 thanks. i understand that laser is just light so yes there is no way of cleaning laser. its the lens, but everyone calls it laser so i did too.
that same thing is wrong with my old one. i called nintendo and they said the disk reader cracked in half so i bought a new disk reader and now all i have to do is replace it (that means going inside the gamecube)
Same with me! While playing Mario Party 5 I got that same error. I have another black gamecube that can read disks, but when it gets to the welcome screen it says cannot read the disk, and it isn't scratched!!!!
@wyten dude check the laser, somtimes the laser needs to get recalibrated also look into the gc if the laser motor is stalled u need 2 clean the gears
While playing simpson hit and run in the console,I got the error saying: The disk could not be read.Please refer to your instruction manual for further instructions.
mada fokc
MrRafita54 19 hours ago
hmm mine does this to but i have a gamcube game it is resident evil and it says disc error read the gamecub operation manul for information but there 2 disc of it the 2 plays but the frist one is not playing ? DX
abbyrw 1 month ago
did u hear the sound of the gamecube, if it makes like stop and going forward then its an error
twin10broter 1 month ago
@twin10broter it says some errors during games to
like the disc cover is open, disc could not be read and an error has occured. happens unexpectally in games
twin10broter 1 month ago
@legalink due the first one wasn't for N64 it was for gamecube but i played it on wii because i baught it on the Wii shop channel :P lol
roberttoot123 1 month ago
@nathano2100 DUDE! I've played paper mario on Wii but idk what Paper Mario TTYD is can you tell me?
roberttoot123 2 months ago
@roberttoot123 Sorry man, I don't know anything about Paper Mario. I've never played it.
wyten 2 months ago
@roberttoot123 i know what it is, its a mario rpg type game, it is a sequal to the paper mario for nintendo 64, its very fun, its one of my favorites
legalink1 1 month ago
Often, when this problem occurs, whenever the system continues to try to read the disc, it will eventually give up, and give you the "An error has occurred" message.
wiiplayer9revisited 2 months ago
Your Disk Drive Is Broken.
Or It Is Disconnected.
Whatever You Do, Do NOT Open The Gamecube.
luigitheracoon12 3 months ago
clean lens with q-tip and then keep trying game. eventually it will read. if not then clean lens a two or three times and let it dry. it will work. maybe the tuffest game system ever made.
hellowellallen 3 months ago
The lens are out of place, you'll need to fix them.
Jaden1291 3 months ago
clean the lens but thats vary and i mean vary hard!!!!!!
thenintendo2 3 months ago
I been trying every method to fix my ty the tasmanian tiger game and non of them worked so far
Kopeke675649 4 months ago
i had that problem, the lense is not adjusted right. you need to get a flat head screw drives and turn the lense until it reads the game. I fixed it up like that and sold it for a whole 5$ :D and you could have sold it for 40$ if you just did that simple process. If you know luke who lives in japan on youtube he made a vid of the process. But anyway did yuo get any oney out of the system or did yuo concider it as worthless and throw it out?
wescoolya 4 months ago
this happened to me with super mario galaxy.
freitas15 5 months ago
that happens to me with paper mario and mario sunshine
UltimateUmbreon1 6 months ago
i got the problom with my sonic dx game
blackoutfour 6 months ago
well you gotta lookit up on you tube
blackoutfour 6 months ago
something like this happens to me with my blue gamecube. I can play games for a short wile. but then it stops reading and i get this error thing. But i have a black gamecube. Also my sliver one is busted too.
MiniVoltar 7 months ago
same with me i am watching the intro on shadow the hedgehog and when it goes to load the first level boom error has occuerd playin it on a wii though
SuperShad0vv 7 months ago
@SuperShad0vv same thing hbappened to me when i wanted to play mario kart dubble dash. I was racing at luigi's cuirct for a while, and when i'm done the race, boom error has occuerd. but on gamecube.
MiniVoltar 7 months ago
hey, listen, I've got the solutions to your problem.
This probles is cause your game ( I sure) is another norma of your nintendo gamecube. for example: sure your GC is ntsc and your game is pal, well, playstation 2 can read another normas games, but in black and white (algo es algo = something is something).
Well, you have to do is to install de chip "xeno" in your gamecube, this chip make that your gamecube can read games backup ( juegos piratas o truchos) and unlock de norma (pal/ ntsc).
aabajolatareaa 7 months ago
I think that the problem is de "norma"... your game is ntsc and your GC are PAL ???
Deberias chipearla creo que con eso solucionamos el problema. yo tengo el mismo problema en este momento y lo voy a intentar.
aabajolatareaa 7 months ago
game cube errror cube = playstation error cube
mjlover818 9 months ago
lol, i have mario party 5
BoomBrush 10 months ago
buy a xbox 360
MrSpunky1994 11 months ago
a mi pasa lo mismo :| sabes como repararlo? :(
enrique8a09 1 year ago
I fix my by getting a gamecube game and using it side to clean the top off the gamecube lends
killer5000ization 1 year ago
GAMECUBE KICKS ASS!!!!!!
wii was a fail...the gamecube menu is more advanced and the games are better. If you could play online it would kick assssssss
JEFFFXS 1 year ago
that happened to my pal i just changed it my bud said you youse the vaccume
superkoopasmasher 1 year ago
how did u do it
TheGamefreak96 1 year ago
When I used to have my gc I had no problems with it like that srry all I can tell u is that u can try and clean the disk I don't have my gc anymore cause I have a wii and I play the gamecube games on it
christy123367 1 year ago
Just buy a PS3
milad015 1 year ago
my launch gc only lasted 2 days rotflol , before i had to return for even exchange lol
ninendowii2000 1 year ago
srry i cant give u any advice even though i used 2 own a gamecube srry
christy123367 1 year ago
my favourite gamecube game is luigis mansion
MitchBandicoot 1 year ago
That happens to my wii and my gamecube! I'm playing paper mario TTYD, and I got to Chapter 2 and now it wont read! PLZ HELP! :'(
Nathano2100 1 year ago
@Nathano2100 Is the disk scratched?
wyten 1 year ago
@wyten Maybe the lens dislodged that causes it.
Jaden1291 3 months ago
@Nathano2100 WOW SAME WITH ME!!!!! NOT A LIE
maotico 1 year ago
@Nathano2100 just keep trying, thats what my sister did
kinkzoz 1 year ago
@Nathano2100 that's exactly what mine does
SuperToast37 9 months ago
WARNING TO PEOPLE OUT THERE DONT GET STUFF OFF EBAY CATION
007spudman 1 year ago
First time this happened to me I was stoned and it freaked me out as fuck lol.
Alohomora 1 year ago 12
thumbs up if the cube screen and memory card screen on the gamecube scared you as a kid.
BobertAdvance 1 year ago 49
@BobertAdvance just the sounds scared me
wescoolya 1 year ago
@BobertAdvance nope it did not i thought tht it was cool
christy123367 1 year ago
i used to have a gcn but this didnt happen
it was a memory card slot erorr
my games said this
"memory card slot a has been damaged"
wrenchrev2005 1 year ago
seeking help- i cannot play any gc on my wii or my gc because everytime i try to select a chapter on the game the cursor just goes up and down the screen and doesnot stop! plz help
legoboy12345678fan1 1 year ago
how long have you had your gamecube? im assuming its 6 or 7 years old. when a gamecube consle is 7 years it doesnt read the disk anymore. same thing happened to me and ive had it for 7 years :\ when i first found out it was dying i was playing sa2b and while i was in the Green Forest level my gc froze and made an "EEEEE" like sound and it stayed like that until i turned it off and then when i turned it back on it wouldnt read the disk D:
SillyZowieNuttyhoppe 1 year ago
try not to play a lot with the gamecube beacause it may not read disc anymore
Darkomegamagic 1 year ago
my problem is my super mario strikers doesn't work
blon66 1 year ago
This has been flagged as spam show
I fix my daughter's gamecube. I've removed the lens and believe it or not, I even wash it with a little bit of my soap dish just slight and rinse and dried it with this little fabric for eyeglasses. I put the lens back to its place and some angle here and there, restarted the cube at every angle I meant, everytime I move the lens to find the exact angle, listens at every spins cuz noisy spin means laser still can't read the disk
ZeldaTwinkle8 1 year ago
mine lasted for 6 or 7 years, the only reason why it "died" was because there was a disc reading error, so suck that microsoft
jgrande345 1 year ago
i had the same problem with my first gamecube, i contacted nintendo and they said something was wrong with a chip in the system and wanted $70 to fix it. i simply just bought a used gamecube off of ebay and it works fine
Monsterman0064 1 year ago
same with me but on sms i get to mech bowser then a error screen pops up saying error plz read manoul for more info plz help
jared1016 1 year ago
I had the same problem a trick to fixing it is get a 1 dollar game put it in the gamecube for test DONT USE A GOOD GAME put the game in and turn the gamecube on and off realy fast if done perfectly it will read the disk but if you have ever cleaned the INSIDE of it it had skrathed te laser that reads the game it is broke
candicetaylor03 1 year ago
I think you need to contact Nintendo about this problem. Or you can contact the store where you bought the GameCube. I never owned a GameCube but I hope this will help.
Jrtheutuber 1 year ago
Right now,ALL my game(exept for mario party 5 aqnd sponge bob square pants battle...... and PARTIALY sonic heroes((becaause only the title screem pops out)) Work) Are Broken, Im Getting new ones, but if i cam fi em, please pm me the way.
TheKeybladeWar 1 year ago
i tried doing this and got great results. i cleaned the laser with a dry q tip or swab in a circular motion sort of like a buffer, then sprayed some wd40 on a qtip and rubbed it on the part that is holding the laser inside on the right hand side. worked great and have no problem playing games.
Zeethr 1 year ago
@Zeethr : actually, it's not the laser you cleaned, it's just the lens..:). The laser is inside and it just goes through the lens that is why it reads the disk. It's what in my opinion.
ZeldaTwinkle8 1 year ago
@ZeldaTwinkle8 thanks. i understand that laser is just light so yes there is no way of cleaning laser. its the lens, but everyone calls it laser so i did too.
Zeethr 1 year ago
that same thing is wrong with my old one. i called nintendo and they said the disk reader cracked in half so i bought a new disk reader and now all i have to do is replace it (that means going inside the gamecube)
colbsters2244 2 years ago
how old is your gamecube? this problem may relate to the gamecubes age
SillyZowieNuttyhoppe 2 years ago
omg that happens to me!!!
SillyZowieNuttyhoppe 2 years ago
same thing to me i feel like i wanna play kirby air ride and i play it and the screen dosen`t come up
jayjay89568956 2 years ago
i think so to clean the eye with a dry paper towl or if you see dust on it blow on it or use a fether duster
vinmasc101 2 years ago
the same exact thing happened to me its either there is too much dust inside and on the lense or the laser came out of place
AgentZ009 2 years ago
Maybe the laser needs to be recalibrated. Or maybe it's just dust.
Kdarkov 2 years ago
my brother and i have the same problem we used toothpaste left it for 5min. drayed it whith a toul. good luck whith that.
SuperWeezy69 2 years ago
This has been flagged as spam show
gay video
kollinl 2 years ago
it also kind of happened with me when I tryed to play kirby air ride but I'm not sure about it looks like it has a crack on the disc.
themetalsonic94 2 years ago
I got that same error today when I attempted to play Super Mario Sunshine. My other Gamecube games work fine, though.
leafsfan18 2 years ago
Same with me! While playing Mario Party 5 I got that same error. I have another black gamecube that can read disks, but when it gets to the welcome screen it says cannot read the disk, and it isn't scratched!!!!
wyten 2 years ago 2
It's the console itself.I fixed mine with a different disk.
VMKCheat 2 years ago
@wyten dude check the laser, somtimes the laser needs to get recalibrated also look into the gc if the laser motor is stalled u need 2 clean the gears
reload195 2 years ago
@wyten did you clean your gamecube or look in it?
6pokemonfan 1 year ago
@6pokemonfan No i couldn't, because i had no tools to open it, and Nintendo Would charge $200 to get it fixed
wyten 1 year ago
While playing simpson hit and run in the console,I got the error saying: The disk could not be read.Please refer to your instruction manual for further instructions.
VMKCheat 2 years ago