hi guys, i work with digidesign 003 at my studio. my friend bought me an allen & heath system 8 as birthday present. i worked with analog gears b4 but never set up by my own as i work with protools all ta tym. so please let me know if u can help me set up ta patches to check ta single flow. u can find out more about me @ facebook. " Boom Factory Production" or just email me @ samirsyd@gmail.com
all i need is to know which cable should patch with which channel on ta back of ta mixer. cheers
Hi Samir, well I don't really know what you have for your setup, how you interface to the analog side. But if you want to use the System 8 as a mic preamp, then you have two options at least:
-use the Master out (it's a stereo 1/4 inch jack) to whatever you have on the other end
-use the system outputs using MONO (not balanced, TRS) jacks to whatever you have on the other end.
It's hard to tell because I don't know your system.
well, the problem is actually hard to see: the neck is too narrow. I think I removed too much with the wood plane. I played it for a couple of years, the action was really good, but in the end the skinny neck was just too annoying so I used the hardware on another guitar.
I will be making another neck in the next year I think. Ungluing the old one will be another fun task...
hi guys, i work with digidesign 003 at my studio. my friend bought me an allen & heath system 8 as birthday present. i worked with analog gears b4 but never set up by my own as i work with protools all ta tym. so please let me know if u can help me set up ta patches to check ta single flow. u can find out more about me @ facebook. " Boom Factory Production" or just email me @ samirsyd@gmail.com
all i need is to know which cable should patch with which channel on ta back of ta mixer. cheers
snrose2002 1 year ago
@snrose2002
Hi Samir, well I don't really know what you have for your setup, how you interface to the analog side. But if you want to use the System 8 as a mic preamp, then you have two options at least:
-use the Master out (it's a stereo 1/4 inch jack) to whatever you have on the other end
-use the system outputs using MONO (not balanced, TRS) jacks to whatever you have on the other end.
It's hard to tell because I don't know your system.
QuiltedPine 1 year ago
This has been flagged as spam show
@QuiltedPine
send me an blank email @ samirsyd@gmail.com. i can send u 2-3 pic than u can get my point. i am using digidesign 003 control surface.
snrose2002 1 year ago
I think I might see the problem with that explorer on the wall.
crimsondynamoo 1 year ago
@crimsondynamoo
well, the problem is actually hard to see: the neck is too narrow. I think I removed too much with the wood plane. I played it for a couple of years, the action was really good, but in the end the skinny neck was just too annoying so I used the hardware on another guitar.
I will be making another neck in the next year I think. Ungluing the old one will be another fun task...
QuiltedPine 1 year ago