I don’t really feel the need to commit on your negative remarks because there’re just non-researched backed opinions. If you really want to decode the symbols all you need is an Illustrated Dictionary of Electronics. I used the 5th edition for references.
Starting with the head, which translates into an optical wave-guide, slotted lens apertures, choke joint groove, side-wall apertures, tapered waveguide note the sphere jewel located near the sidewall aperture in the tapered waveguide horn think sphere oscillator also a jewel can indicate an electrical unit of power.
Translate the choke necklace into choke coil (the primary coil) the beads into ferrite or ceramic beads. The loop necklace into the secondary coil note the bridge in the center of the loop necklace drooped about the shoulders and chest of the statue. The third coil located there on the torso is a delta
Note the patch on the sides of the shoulders now translate that into patch antenna.
I think you're over-analyzing the artistic flourishes of a decorative figurine as an accurate technical model.
What you have here is a spark gap generator.
If you want to defy gravity, you'll need to gain access to the deep underlying Eludium deposits on our moon (A naturally occurring high-temperature superconductor) and have the tools necessary to refine it to 100% purity, align the polarization, and create an extremely delicate and compact Eludium matrix to generate the Casimir effect.
That is a Japanese Dogu figure from between 1000-400 BC, and it is certainly not a UFO. The Jomon people were known for elaborate forms in their craftsmanship, but you'd have to be schizophrenic and dangerously undermedicated to think any of it had to do with aliens. There's stuff like this, in one form or another, all over the planet, and most of it is much older.
Really all it shows is that Japan was way behind the technological curve compared to other cultures.
Subs and spacecraft are fairly similar but no I have not and probably won’t attempt any submersible test however I can assure you this is aerospace technology encoded into these artifacts.
@wingchunguru3 I'm not trying to insult you by saying this: I am convinced that you are suffering from schizophrenia. Lots of people have this, and it doesn't mean they're crazy. They are suffering from a legitimate illness, and medication helps them deal with it.
But, hell, you're probably going to hide this comment and get paranoid about me being an agent from the government trying to silence your research. So go ahead. Stay sick.
Yes, I have made good progressed in the past few months!
There are a number of issues to clear up, most have to do with component interconnectivity, as it is difficult to determine by the ancient schematics whether or not the propulsion system is hard-wired or inductively coupled and without technical assistance its all about trial and error.
So stay tuned to this channel for future video updates premiering soon!
It started by recognize 3 vortex or implo based symbols similar to modern day turbo charging afterwards all I had to do was open the illustrated dictionary of electronics using a little word play f.e.g. there is a choke necklace about the throat of the statues so look up choke coils remember a necklace is also a type of coil or loop. Now you have the building blocks to decode the engineering linguistics encoded in the DOGU
No, I am still constructing the new wing that you see in the video. This new wing will be the circuit board for all future gravitic testing even if my first attempt fails the wing and circuit board will remain mostly unchanged for any future test.
It sure would be nice to have some help from the electronics community but most of them can’t wrap their minds around the fact that every form of energy comes from the environment of space and is technologically accessible and therefore usable by us.
hi would you be looking at making the electrons (negative) be the propulsion source for this gravity wing.and if so would a type of old television electron element thatpinches the electrons into a very narrow field (used by making copper windings to pinch them into a minute area) i would expect this will amplify the gravitation force no expert just seeing that electrons and protons play a major part in all this type of technology thanks melvin
Basic law attraction/repulsion answers your question what you describe has to do with the energy gathering system that powers the device. Sounds contradictory seeing as how energy wing an propulsion are one in the same almost indistinguishable but they can be split into 3 main systems e.g. energy gathering, energy amplification even thou energy amplification and propulsion are one in the same we can split them into two functions for ease of conversation.
I don’t really feel the need to commit on your negative remarks because there’re just non-researched backed opinions. If you really want to decode the symbols all you need is an Illustrated Dictionary of Electronics. I used the 5th edition for references.
wingchunguru3 2 weeks ago
Starting with the head, which translates into an optical wave-guide, slotted lens apertures, choke joint groove, side-wall apertures, tapered waveguide note the sphere jewel located near the sidewall aperture in the tapered waveguide horn think sphere oscillator also a jewel can indicate an electrical unit of power.
wingchunguru3 2 weeks ago
Translate the choke necklace into choke coil (the primary coil) the beads into ferrite or ceramic beads. The loop necklace into the secondary coil note the bridge in the center of the loop necklace drooped about the shoulders and chest of the statue. The third coil located there on the torso is a delta
Note the patch on the sides of the shoulders now translate that into patch antenna.
wingchunguru3 2 weeks ago
Look at all the curl patterns and translate that into magnetic curl
Note the four-leg/arm structures denote gas filled asymmetrical capacitor structures
And the two gismos on the chest that look like mammary glands those are YIG oscillator spheres!
Also the whole body represents the shape of the spacecraft!
Now go do some research and stop being so naïve and full of yourselves its unbecoming!
Robert A. Patterson
Implosive Dynamic
wingchunguru3 2 weeks ago
I think you're over-analyzing the artistic flourishes of a decorative figurine as an accurate technical model.
What you have here is a spark gap generator.
If you want to defy gravity, you'll need to gain access to the deep underlying Eludium deposits on our moon (A naturally occurring high-temperature superconductor) and have the tools necessary to refine it to 100% purity, align the polarization, and create an extremely delicate and compact Eludium matrix to generate the Casimir effect.
weylin6 2 weeks ago
That is a Japanese Dogu figure from between 1000-400 BC, and it is certainly not a UFO. The Jomon people were known for elaborate forms in their craftsmanship, but you'd have to be schizophrenic and dangerously undermedicated to think any of it had to do with aliens. There's stuff like this, in one form or another, all over the planet, and most of it is much older.
Really all it shows is that Japan was way behind the technological curve compared to other cultures.
autocon2002 3 weeks ago in playlist More videos from wingchunguru3
u need more power. Invent an energy source then use it to power ur designs
ikoronduka 4 months ago
heh why even make videos if you'll never show the final product in working order...
aviatoreyes 6 months ago
Hey why even type the words if you already know the answer?
Can you not see this an ongoing project…
Robert A. Patterson
wingchunguru3 6 months ago
Have you tried this in water? The doll looks like a deep sea diver with the pincher hands and feet. Maybe is like the caterpillar drive for subs.
astrialkil 10 months ago
Subs and spacecraft are fairly similar but no I have not and probably won’t attempt any submersible test however I can assure you this is aerospace technology encoded into these artifacts.
Robert A. Patterson
wingchunguru3 10 months ago
@wingchunguru3 I'm not trying to insult you by saying this: I am convinced that you are suffering from schizophrenia. Lots of people have this, and it doesn't mean they're crazy. They are suffering from a legitimate illness, and medication helps them deal with it.
But, hell, you're probably going to hide this comment and get paranoid about me being an agent from the government trying to silence your research. So go ahead. Stay sick.
autocon2002 3 weeks ago in playlist More videos from wingchunguru3
any new development on your dogu wing?
Iseekoutthetruth 11 months ago
Yes, I have made good progressed in the past few months!
There are a number of issues to clear up, most have to do with component interconnectivity, as it is difficult to determine by the ancient schematics whether or not the propulsion system is hard-wired or inductively coupled and without technical assistance its all about trial and error.
So stay tuned to this channel for future video updates premiering soon!
Robert A. Patterson
Implosive Dynamic
wingchunguru3 11 months ago
@wingchunguru3 well it a kewl looking design
Iseekoutthetruth 11 months ago
Imagination and science go hand in hand.
irezric 11 months ago
very nice
will be watching to see it finished
clin1392 1 year ago
how does one exactly decode the dobu figurine?
ididjaustralia 1 year ago
It started by recognize 3 vortex or implo based symbols similar to modern day turbo charging afterwards all I had to do was open the illustrated dictionary of electronics using a little word play f.e.g. there is a choke necklace about the throat of the statues so look up choke coils remember a necklace is also a type of coil or loop. Now you have the building blocks to decode the engineering linguistics encoded in the DOGU
Dampened Oscillatory Gravitic Unit
Robert A. Patterson
wingchunguru3 1 year ago
@wingchunguru3 have u got it to function yet? does it fly?
ididjaustralia 1 year ago
No, I am still constructing the new wing that you see in the video. This new wing will be the circuit board for all future gravitic testing even if my first attempt fails the wing and circuit board will remain mostly unchanged for any future test.
Robert A. Patterson
wingchunguru3 1 year ago
It sure would be nice to have some help from the electronics community but most of them can’t wrap their minds around the fact that every form of energy comes from the environment of space and is technologically accessible and therefore usable by us.
Robert A. Patterson
Implosive Dynamic
wingchunguru3 1 year ago
OMG! now I understand!!! you should make it levitate when done
calito0010 1 year ago
Nice construction, thanks for sharing.
mrgalleria 1 year ago
hi would you be looking at making the electrons (negative) be the propulsion source for this gravity wing.and if so would a type of old television electron element thatpinches the electrons into a very narrow field (used by making copper windings to pinch them into a minute area) i would expect this will amplify the gravitation force no expert just seeing that electrons and protons play a major part in all this type of technology thanks melvin
honda4004 1 year ago
Basic law attraction/repulsion answers your question what you describe has to do with the energy gathering system that powers the device. Sounds contradictory seeing as how energy wing an propulsion are one in the same almost indistinguishable but they can be split into 3 main systems e.g. energy gathering, energy amplification even thou energy amplification and propulsion are one in the same we can split them into two functions for ease of conversation.
Robert A. Patterson
wingchunguru3 1 year ago