@kickflip246810 when you buy these light they come with light bulbs already if not you will just transfer over your stock bulbs. You would not have to buy or replace any bulbs unless they are broken at the time of installation or prior to that.
@spyderauto ok thanks, i was just confused because the halos. like i didnt know if you had to buy special bulbs. because of the different color ring and lights
I bought these lights a couple months ago and I'm wondering if there is any way to upgrade the leds that light the halos up. The halos surrounding the high beam only light up on the bottom half and the top isnt lit up much at all. Is there any way to put brighter leds for the rings? Please respond. They are not ccfl rings.
I bought a pair of Angel Eyes with the HID conversion kit for my Volvo 850. The negative and positive wires for the turn signal all converge into one wiring harness. Am I supposed to cut and splice in the positive and negative Halo wires in the turn signal harness?
@volvoguy850r yes, you will tap them in to you turn signal harness but make sure you have them tap in to turn on as parking lights not your turn signal other wire they will blink when you signal
This video doesn't say anything about the ccfl inverters. The instructions that came with the head lights calls for their installation but they weren't included with the head lights. Do I need them?
@ShiftRedDan You will need to have the CCFL inverter plug in to the halo in order for it to work because CCFL uses AC power and the car produces DC power. After you have plug in the inverter you just wire it up like the HALO/LED.
Got a question no one has answered yet. I have a Pontiac Grand am 03, I was wondering do I need to run my blinker cables separately or run them threw the main cable(Red/Black) like the rest of the cables? I'm a little lost, please help
@alphadog801 i am sorry i am dont understand the question. If you are trying to wire the HALO/LED you will connect the wire to the parking lights that is usually with the turn signal. The turn signal will have 3 wire, 1- ground 1-parking light, and 1-blinker. you will need a voltmeter to tell which is which. If you are having anymore problems let us know. Thank you
@Supersaviour95 if you want them on when you turn on your parking lights you will wire it to there,
if you want then on when you turn on your low beam then wire it to your low beam. You can use the quick splice to connect them in to the wire as they will be the fastest way and they work fine.
I don't know what part of the country you are in but those "quick connects" should be outlawed! those connections will only last a few months in the humidity and salt, even if they are taped. All electrical connections must be made with proper soldering and sealing techniques in order to ensure long life. You should redo this video showing proper solder and heatshrink use. Also NEVR recommend to pierce a wire with a tester as you have now comprimised the insulation and the wire will fail now.
yea all good till park light connection i would use a different connector than a quick connect i would use a bullit or something you could un plug in case of replace cause now you gotta cut it free to remove it
@nigel3018 you can purchase them at most electronics stores. I believe Radio Shack should carry them. You may want to give them a ring before you head there.
@nigel3018 You can obtain Quick Splice Connectors at your local Auto Parts Store, select electronics stores (like RadioShack, among others) and are also sometimes available at hardware stores.
where do you get the Right transformer or will a Relay work or a LED Load Balancer style Relay do the Job some LED Light kits don't come with everything
No comments on this video yet!? crazy! My 03 F150 only has one headlight bulb on each side. Im assuming its a bulb that operates at 2 different voltage levels. Its a 9007 bulb... But I see your headlight on ebay shows 2 seperate bulbs for it.. So how does that work!?
I have a question.. what AWG size are the wires, I mean what gauge size for the quick splices
jeancrivera1 6 days ago
i have a question, when you buy these do you just connect the stock bulbs to these or do you have to buy more bulbs? do they bulbs come with this?
kickflip246810 2 weeks ago
@kickflip246810 when you buy these light they come with light bulbs already if not you will just transfer over your stock bulbs. You would not have to buy or replace any bulbs unless they are broken at the time of installation or prior to that.
spyderauto 2 weeks ago
@spyderauto ok thanks, i was just confused because the halos. like i didnt know if you had to buy special bulbs. because of the different color ring and lights
kickflip246810 2 weeks ago
I bought these lights a couple months ago and I'm wondering if there is any way to upgrade the leds that light the halos up. The halos surrounding the high beam only light up on the bottom half and the top isnt lit up much at all. Is there any way to put brighter leds for the rings? Please respond. They are not ccfl rings.
jak3117 3 weeks ago
@jak3117 There is no easy way to get them brighter without taking them apart and when you do that your warranty will be void.
spyderauto 2 weeks ago
I bought a pair of Angel Eyes with the HID conversion kit for my Volvo 850. The negative and positive wires for the turn signal all converge into one wiring harness. Am I supposed to cut and splice in the positive and negative Halo wires in the turn signal harness?
volvoguy850r 4 weeks ago
@volvoguy850r yes, you will tap them in to you turn signal harness but make sure you have them tap in to turn on as parking lights not your turn signal other wire they will blink when you signal
spyderauto 3 weeks ago
how do you adjust the lights the question was not answered.
ATVQUADSQUAD 2 months ago
@ATVQUADSQUAD You can adjust the headlamps using the adjustment screws on the back of your headlamp assembly.
spyderauto 1 month ago
This video doesn't say anything about the ccfl inverters. The instructions that came with the head lights calls for their installation but they weren't included with the head lights. Do I need them?
ShiftRedDan 3 months ago
@ShiftRedDan You will need to have the CCFL inverter plug in to the halo in order for it to work because CCFL uses AC power and the car produces DC power. After you have plug in the inverter you just wire it up like the HALO/LED.
spyderauto 3 months ago
Got a question no one has answered yet. I have a Pontiac Grand am 03, I was wondering do I need to run my blinker cables separately or run them threw the main cable(Red/Black) like the rest of the cables? I'm a little lost, please help
alphadog801 4 months ago
@alphadog801 i am sorry i am dont understand the question. If you are trying to wire the HALO/LED you will connect the wire to the parking lights that is usually with the turn signal. The turn signal will have 3 wire, 1- ground 1-parking light, and 1-blinker. you will need a voltmeter to tell which is which. If you are having anymore problems let us know. Thank you
spyderauto 4 months ago
@Supersaviour95 if you want them on when you turn on your parking lights you will wire it to there,
if you want then on when you turn on your low beam then wire it to your low beam. You can use the quick splice to connect them in to the wire as they will be the fastest way and they work fine.
spyderauto 4 months ago
How do u adjust these?
latinosurge49 4 months ago
@latinosurge49 there are two adjustment screw on the top of the light that you can screw to adjust the lights.
spyderauto 4 months ago
I don't know what part of the country you are in but those "quick connects" should be outlawed! those connections will only last a few months in the humidity and salt, even if they are taped. All electrical connections must be made with proper soldering and sealing techniques in order to ensure long life. You should redo this video showing proper solder and heatshrink use. Also NEVR recommend to pierce a wire with a tester as you have now comprimised the insulation and the wire will fail now.
phils57 5 months ago
will hids fit into the 05 halo projector headlights?
jasonbellows7 5 months ago
@jasonbellows7 I am sorry I do not know which which part you are talking about can you please specific which part you are talking about. Thank You
spyderauto 5 months ago
yea all good till park light connection i would use a different connector than a quick connect i would use a bullit or something you could un plug in case of replace cause now you gotta cut it free to remove it
twinstroke 6 months ago
@twinstroke another option will be to use butt connectors
spyderauto 6 months ago
Is the quick connectors are the same thing as splicing, right?
xIStickly 7 months ago
what guage wire connectors are you useing?
koolmancrew99 8 months ago
song?
bigmarc977 8 months ago
@bigmarc977 kaskade i remember.. i can concentrate on the video cause im thinkng of the song lol
dakotadill 6 months ago
Where could I get quick connects??
nigel3018 8 months ago
@nigel3018 you can purchase them at most electronics stores. I believe Radio Shack should carry them. You may want to give them a ring before you head there.
spyderauto 8 months ago
@nigel3018 You can obtain Quick Splice Connectors at your local Auto Parts Store, select electronics stores (like RadioShack, among others) and are also sometimes available at hardware stores.
spyderauto 1 month ago
where do you get the Right transformer or will a Relay work or a LED Load Balancer style Relay do the Job some LED Light kits don't come with everything
Parrotluver2 8 months ago
@Parrotluver2 You do not need to add any transformer/relay/load balancer etc. You can simply splice them and they will work without flickering etc.
spyderauto 8 months ago
This saved me some big time! Have a silverado that year model and now I know which wire to use! Thanks!!
nixipod 8 months ago
T-8 ULTRA WHITE LED Bulbs. superbrightled has them
spyderauto 9 months ago
WHERE do we get replacement LED bulbs for these lights? We have one that's gone out...
kastnmagic 9 months ago
omfg deadmau5 now i have to buy em offf your ebay store no joke
forrun1098 9 months ago
Great installation video thanks alot for posting
ceooner 1 year ago
No comments on this video yet!? crazy! My 03 F150 only has one headlight bulb on each side. Im assuming its a bulb that operates at 2 different voltage levels. Its a 9007 bulb... But I see your headlight on ebay shows 2 seperate bulbs for it.. So how does that work!?
BSchorr 1 year ago