7:04 what are you doing?? o.o are you crazy? Clean the gpu-cpu and then put the Arctic Silver 5!And you put too much thermal paste!! Crazyy man!!!! =)
Yuu the first person I seen do this properly good work man looks good I need to ask thou that black thing yuu put on the CPU 's where did yuu find that hit me up on twitter @GottaGetitJnr I need 1
@boostedboogie Overclock doesn't mean watercool numbnuts. People who like to overclock tend to watercool do achieve a lower operating temperature so that they can increase the clock.
This guy is doing the same thing here but he's water cooling it instead to prevent the red ring of death error. Don't try and talk down to somebody like they don't know what they're talking about when you haven't got a clue either.
@boostedboogie Overclock does not mean watercool, overclocking is raising processor/graphics/ram clock speeds to higher than stock in order to make them go faster. Also you made several mistakes, first of all NEVER run a pump without coolant in it, second is red wire = 5v, yellow = 12v, you soldered the pumps 5v to a 12v wire. I can respect that you are putting in the effort to watercool an xbox but you should get your facts straight before you try. Its really something not to play around with.
@Hokrollo1 i agree, i would spin this kit around and put it on my computer. the xbox was designed with enough processing power to handle all games and anything u need, whereas with a computer, computer buffs push their CPUs to the limit all the time
Can i pay you 250. For another one with the watercooled system. Color changing leds and a clear case. Ill give you 250 im willing to go a little bit higher. And i have two questions. Will it ever get red ring of death again? Whats the return policy. P.s. I dont have an xbox 360
Your right, in order to clean up the install, you needed to have the pump hooked up BUT, your pump can be damaged if it runs without fluid going through it. A few minutes without can seriously shorten the life span of your pump. Personally I would add a flow indicator to the tubes somewhere so your can make sure the water if flowing. Also, your using Arctic Silver 5-great stuff, but its VERY conductive and can short out the little pins surrounding the cpu and gpu chip. be careful
Your, black... yeeww
NeGStealth 2 weeks ago
i saw the pedo bear
ts502004 2 weeks ago
where do u get all of the parts from
TheJacx2000 1 month ago
You totally flooded the dies with thermal paste and you didn't even take the excess off
coryboyo 1 month ago
dude runnig that pump dry is really bad for it... just sayin
PortalAnim 2 months ago
I LOVE THE CANDLE
lesmat111 2 months ago
7:04 what are you doing?? o.o are you crazy? Clean the gpu-cpu and then put the Arctic Silver 5!And you put too much thermal paste!! Crazyy man!!!! =)
NikyRipy 4 months ago
What kind of pump u using i really need to know
TheInsainepops 5 months ago
@TheInsainepops all the info is on my website underattacker . com
boostedboogie 3 months ago
waoooow...................... headshot...
mylegolife 5 months ago
Yuu the first person I seen do this properly good work man looks good I need to ask thou that black thing yuu put on the CPU 's where did yuu find that hit me up on twitter @GottaGetitJnr I need 1
therealestJayR 5 months ago
@therealestJayR its a waterblock for the 360. shouldn't be too hard to find.
boostedboogie 3 months ago
what kind of pump is that please I need to know.
TheInsainepops 6 months ago
Do you have to overheat the xbox to fix the solder joints and prevent the RROD after you put the waterblock on?
22teamplayer 7 months ago
@22teamplayer on some xboxes you do, i didn't have to do that for mine
boostedboogie 3 months ago
what if water leaks??? lol
iamprabhnoor 7 months ago
@iamprabhnoor u do a leak test for about 5 hours and u get non conductive coolant
MiniExtreme 6 months ago
@iamprabhnoor then that would suck
boostedboogie 3 months ago
@iamprabhnoor That happen to my friend tylers xbox.. Not a fun day... Not at all :/
TheModzBox 2 months ago
in america they soooda
in england the say sol-der
joealtair3000 7 months ago
were did u get you kit from hommie
majinboo75 7 months ago
@majinboo75 it was all custom parts put together into one kit.
boostedboogie 7 months ago
I hear vent in the background XD
y35n00b5 7 months ago
What block did u use and by the wayhow much fukin thermal grease do u need bud, u only need the size of an grain of un cooked rice
ncixcomputergeek 8 months ago
So why watercool an Xbox? It's not like you can overclock it is it? lol
Hokrollo1 8 months ago
@Hokrollo1 you overclock it so that it doesn't overheat and do the rrod
boostedboogie 8 months ago
@boostedboogie
Comment doesn't make sence...
Hokrollo1 8 months ago
@Hokrollo1 overclock = watercool. hopefully that makes SENSE
boostedboogie 8 months ago
@boostedboogie Overclock doesn't mean watercool numbnuts. People who like to overclock tend to watercool do achieve a lower operating temperature so that they can increase the clock.
This guy is doing the same thing here but he's water cooling it instead to prevent the red ring of death error. Don't try and talk down to somebody like they don't know what they're talking about when you haven't got a clue either.
MrVestek 8 months ago
@boostedboogie Overclock does not mean watercool, overclocking is raising processor/graphics/ram clock speeds to higher than stock in order to make them go faster. Also you made several mistakes, first of all NEVER run a pump without coolant in it, second is red wire = 5v, yellow = 12v, you soldered the pumps 5v to a 12v wire. I can respect that you are putting in the effort to watercool an xbox but you should get your facts straight before you try. Its really something not to play around with.
samstar1412 7 months ago
@boostedboogie No, overclock = increase cpu/gpu/ram speed.
IbroPK 7 months ago 5
@boostedboogie you put way to much thermal paste on
MiniExtreme 6 months ago
@Hokrollo1 i agree, i would spin this kit around and put it on my computer. the xbox was designed with enough processing power to handle all games and anything u need, whereas with a computer, computer buffs push their CPUs to the limit all the time
S4lsn1p3d 7 months ago
is it for sale still
TheGtaExpert1 10 months ago
LOL AT PEDOBEAR STICKER!
Xpatrick247X 1 year ago
i will take it for 190 or 180 msg me back or 200 if u need tht
sawyer406 1 year ago
Can i pay you 250. For another one with the watercooled system. Color changing leds and a clear case. Ill give you 250 im willing to go a little bit higher. And i have two questions. Will it ever get red ring of death again? Whats the return policy. P.s. I dont have an xbox 360
jcor50 1 year ago
5:18 HAHAHAHAHAHAHAHAHAHAHAHA
auroraenergy 1 year ago
All this stuff already make for?
ninjatoad3 1 year ago
where can i buy all this stuff?
FlyinRaptorJesus 1 year ago
how much do you want to for and can you send it to australia
yevaran1996 1 year ago
how much do you want to for and can you send it to australia
yevaran1996 1 year ago
I have bought it guys. Sorry to burst your bubbles. Lol
rdog348 1 year ago
where did you buy the watercooler?
TeamxEvil 1 year ago
I will pay 350$ for it my gt is ttg Im a hack
cballer7032 1 year ago
@cballer7032 send me an email or msg. boostedboogie@gmail.com
boostedboogie 1 year ago
How much are you wanting for it?
DefinedMods 1 year ago
@DefinedMods 200
boostedboogie 1 year ago
Still for sale? What price are you wanting for it?
DefinedMods 1 year ago
@DefinedMods $200 or so
boostedboogie 1 year ago
is it still for sale
cocoa562 1 year ago
@cocoa562 yup still for sale
boostedboogie 1 year ago
holy shit man.... wayyyyyyy tooo much thermal compound.... wayyyyyy too much. otherwise i like it.
xsAkIsx 1 year ago
hey im looking to wear to buy this exact watter cooler pls help send me a link pleaseee
fsssfez 1 year ago
You did so many wrong things in this video it's not even funny.
vearheart42 1 year ago
You should NEVER run your water pump dry.
NEVER! you shorten it's life by like 3 years for like 15 minutes of dry use.
vearheart42 1 year ago
2 things you shouldnt turn on the pump with it and why didnt u use a noctua those things are so quiet
thelilhacker 1 year ago
@thelilhacker wiring the pump to the xbox's motherboard was completely necessary to get everything to work.
boostedboogie 1 year ago
Comment removed
oqsajec 1 year ago
@boostedboogie
Your right, in order to clean up the install, you needed to have the pump hooked up BUT, your pump can be damaged if it runs without fluid going through it. A few minutes without can seriously shorten the life span of your pump. Personally I would add a flow indicator to the tubes somewhere so your can make sure the water if flowing. Also, your using Arctic Silver 5-great stuff, but its VERY conductive and can short out the little pins surrounding the cpu and gpu chip. be careful
oqsajec 1 year ago
Can u tell me where you bought that cpu & gpu water block??? thnks.....
xboxmods117 1 year ago
What is the name of that waterblock that goes over the GPU and CPU... plz just message me... =) thnks
xboxmods117 1 year ago
the trick is not to flood it you say well thats exactly what you done you tit
p166y123 1 year ago
Did your xbox RROD?
wildreams 1 year ago
@wildreams nope not yet. i've had it run for days at a time and still no problems.
boostedboogie 1 year ago
lol to the guy in the background
DtCKclan 1 year ago
mate it is called solder not soder
morganbagert 2 years ago
uhh yes but it's pronounced "sauh-der" checkMATE
boostedboogie 2 years ago 6
@boostedboogie i think its pronounced either way but im not sure. where did you get the green case?
Kilroy369Productions 1 year ago
ware did u get the petobear sticker haha
CallawayINC 2 years ago
This is why I bought a ps3..no direspect but you have to do all of this so it won't overheat
IIzNeedzMoney 2 years ago
for technican's its easy man, but for noobies like us, no way. btw ps3 run also hot even the slim.
btw i hate the ps3 slim u cant play ps2 games there isnt even a card reader. to failure.
The looks of a ps3 is much nicer
hippievogelei 2 years ago
lol. I got the same phone and soldering iron. Also nice xbox.
XxxSmgHunterxxX 2 years ago
if you put that stuff in a lian li xbo1 you could put almost everything internaly
uwanaugoda 2 years ago
you're right, but i purposely wanted to do everything with the original case with the reservoir and tubing exposed
boostedboogie 2 years ago
Dude, I hate Xbox,
But I truly enjoyed this video, You did some great stuff man.
Thank you for peaking my modding interest.
ZangetsuWielder 2 years ago
way too much thermal greese, and you should have cleaned the processor before adding new compound. apart from that it's really nice :)
jricketts1 2 years ago
dude that thing is gonna be so loud
LSControllers 2 years ago
it's not loud at all. i have it sitting here next to me whenever i play on live and it never bothers me.
boostedboogie 2 years ago
lol at the noises in the background
nice mod AWSESOME XBOX
lbxac20 2 years ago
awe no way this is on xbox scene you should of put the video links on xbox scene.
Benhojka 2 years ago