nick, can you PLEASE link me to those headers you have? and did you need a midpipe to install it? im really trying to find headers and i have an 07 2.5i i just neeed some help
I am going to do the exact same setup . This is the best sounding impreza ive heard in a long long time. makes me real jealous :| God it sounds so damn good! Its got the raspy / growl sound. i fuckin love it!!! (yea i gotta calm down)
@tjamesburnham it was roughly $1,800 to do it all. i probably saved a lot by putting it on my self. It took me 3 months to find everything and make sure it all fit. the reason i did it all was because i wanted the apexi n1 exhaust then found out that it did not just bolt up and i didn't want to cut it up to make it work so i just decided to do the entire thing.
I cant wait to have my 07 sounding like this. Looking for the right replica headers right now!! Very happy you posted this video! Almost exact same car
i have a 2.5i aswell and i was wondering what kind of muffler and tip you had before you put on the apex cuz i dont have much money for a catback i like your muffler before aswell thanks
@patryk275120 it was just some random tip he had to choose from. it wasn't anything special really, just the one i liked. if you go to a muffler shop to get ti put on or to even get a tip, they should have a good amount to choose from.
@Goff86 yeah only when going 85 for a long period of time prob an hour or more. but then i just disconnect my battery for a few minutes and it goes away.
•2,457 cc 2.5 liters horizontal 4 front engine with 99.5 mm bore, 79 mm stroke, 10 compression ratio, overhead cam, variable valve timing/camshaft and four valves per cylinder
@Liquid167 I did get one when i would cruise on the freeway at 80mph for a long period of time, but that was it. all i did was disconnect my battery for a few minutes and it went away.
@Corkoth55 yes i installed it all my self. i don't remember an exact # but it was around 1500, i can get my stuff out from when i did it to give you an exact # if you want.
Hey Nick, I need your help ASAP because no one else has a clue when i ask even on the subaru forums lol. What Apexi N1 catback is that? Is it the 98-01 60mm one or the 02-07 WRX 65-65-80mm one? Thanks man
@XxXDrummerxXx, one exhaust hanger didn't like up very well. but it was still able to connect. in order for the exhaust to line up i did have to buy the highflow cat and the headers. other wise i would have had to have the flange on the N1 cut and rewelded to make it line up with the factory side of the cat. hope that helps....
I did get one when i would cruise on the freeway at 80mph for a long period of time, but that was it. all i did was disconnect my battery for a few minutes and it went away.
it's the borla UEL headers, stromung high flow cat, apexi n1 cat back exhaust. O2 sensor extension, w/ spacer, jet hot coating on the headers and high flow cat.
hey i just bought the exact same set up for my 07 2.5i. What kind, if any, mods did u have to do o make this fit. I know the 02 sensor extension. Is that it?
hey man, i have an 06 2.5 just like urs actually lol, im goin exhaust shopping, i already have the borlas and a cat delete track pipe but i need a cat back, after seeing this i checked apexi's website and the N1 is for wrx 2002+..did it still fit?
Great sound and Great job ive been trying to find a set of headers for my 06 2.5i. If anyone knows where could find some, i would gladly appreciate it.
wow. Amazingly well done comparison video, all should be like this. Anyway, that is a GREAT difference, sounds beastly for a 2.5i especially. Unequal length headers ftw!
im buyin a suby in a few months. 2.5 n/a for sure. now that i know i can get that dirty sound without the turbo. i would opt for the turbo but for 1 ppl in ontario are scared to race cause of the new laws. including me. and 2 insurance has got to be waaaaaaaaaay cheeper. how much was this set up. im thinkin of just getting them to make me custom unequal headers to like 2.5 all the way thru obviously upgrading cat rez and muffler. awsome care man. realy has put the icing on the cake for me.
Where did you get the headers and apexi exhaust?
Meza0126 3 weeks ago
Hmm I hope I don't either, but in new York the cops dont play that haha the laws are ridic
gunslingerat3rd 3 weeks ago
@gunslingerat3rd yeah az is a very lenient state.
nick06suby 3 weeks ago
Have you gotten any tickets for your exhaust??
gunslingerat3rd 3 weeks ago
@gunslingerat3rd nope never
nick06suby 3 weeks ago
def the best sounding rs ive ever heard hah
YaBoiKlaus 3 weeks ago
@YaBoiKlaus Thanks!
nick06suby 3 weeks ago
nick, can you PLEASE link me to those headers you have? and did you need a midpipe to install it? im really trying to find headers and i have an 07 2.5i i just neeed some help
YaBoiKlaus 5 months ago
I am going to do the exact same setup . This is the best sounding impreza ive heard in a long long time. makes me real jealous :| God it sounds so damn good! Its got the raspy / growl sound. i fuckin love it!!! (yea i gotta calm down)
Gr33nAv 9 months ago
how much did it cost you all together?
tjamesburnham 9 months ago
@tjamesburnham it was roughly $1,800 to do it all. i probably saved a lot by putting it on my self. It took me 3 months to find everything and make sure it all fit. the reason i did it all was because i wanted the apexi n1 exhaust then found out that it did not just bolt up and i didn't want to cut it up to make it work so i just decided to do the entire thing.
nick06suby 9 months ago
I cant wait to have my 07 sounding like this. Looking for the right replica headers right now!! Very happy you posted this video! Almost exact same car
Kymco90 10 months ago
@Kymco90 yeah, it took me a while to peice it all together, but worth it.
nick06suby 10 months ago
@nick06suby i bought a set of replica's from speed_daddy for 97 to 05 I heard they will fit with some adjustment.
do you think that?
Kymco90 10 months ago
@Kymco90 i just went to there site and didn't see any headers for subarus? what's the part # for them?
nick06suby 10 months ago
@nick06suby ill send you them in a message. i got a link to the exact same ones I bought.
Kymco90 10 months ago
@Kymco90 what borla is that? the website doesnt show it
Kymco90 10 months ago
thought you were gonna drive right off the curb in that last clip haha.
bennyv04988 10 months ago
@bennyv04988 hahahah that's funny i never noticed that.
nick06suby 10 months ago
Comment removed
patryk275120 11 months ago
i have a 2.5i aswell and i was wondering what kind of muffler and tip you had before you put on the apex cuz i dont have much money for a catback i like your muffler before aswell thanks
patryk275120 11 months ago
@patryk275120 it's a magnaflow with a standard round with round over tip. i think it was about 150 or so installed.
nick06suby 11 months ago
@nick06suby ok thanks man will a magnaflow muffler from pepboys work?
patryk275120 11 months ago
@patryk275120 i'm sure it will, i just bought a universal one from a muffler shop and had them weld it on with a tip.
nick06suby 11 months ago
ok thanks
patryk275120 11 months ago
what kind of tip was that
patryk275120 11 months ago
@patryk275120 it was just some random tip he had to choose from. it wasn't anything special really, just the one i liked. if you go to a muffler shop to get ti put on or to even get a tip, they should have a good amount to choose from.
nick06suby 11 months ago
do you get any check engine lights?
Goff86 11 months ago
@Goff86 yeah only when going 85 for a long period of time prob an hour or more. but then i just disconnect my battery for a few minutes and it goes away.
nick06suby 11 months ago
Is this a SOHC or DOHC Engine?
NimodeeMOON 11 months ago
@NimodeeMOON
•2,457 cc 2.5 liters horizontal 4 front engine with 99.5 mm bore, 79 mm stroke, 10 compression ratio, overhead cam, variable valve timing/camshaft and four valves per cylinder
nick06suby 11 months ago
@nick06suby Tnks! Can you make a picture from underside? My OEM manifold, from my MY06 2.0rs is different than your ...
NimodeeMOON 11 months ago
@NimodeeMOON, i don't have this car any more, i upgraded to a 09 wrx a couple years ago. sorry. but i thought all the 06 rs's were 2.5's
nick06suby 11 months ago
@NimodeeMOON Subaru forever? ;-) Nice, cool
NimodeeMOON 11 months ago
@NimodeeMOON single overhead cam
nick06suby 11 months ago
Comment removed
subiefn 1 year ago
any check engine light?
Liquid167 1 year ago
@Liquid167 I did get one when i would cruise on the freeway at 80mph for a long period of time, but that was it. all i did was disconnect my battery for a few minutes and it went away.
nick06suby 1 year ago
one of the BEST sounding ones, just ever.
Corkoth55 1 year ago
@Corkoth55 thank you
nick06suby 1 year ago
@nick06suby how much did it cost all together? and did you install all of it?
Corkoth55 1 year ago
@Corkoth55 yes i installed it all my self. i don't remember an exact # but it was around 1500, i can get my stuff out from when i did it to give you an exact # if you want.
nick06suby 1 year ago
Hey Nick, I need your help ASAP because no one else has a clue when i ask even on the subaru forums lol. What Apexi N1 catback is that? Is it the 98-01 60mm one or the 02-07 WRX 65-65-80mm one? Thanks man
radstang1989 1 year ago
@radstang1989 hey it's the 1996-2000. the product code is 162-kf01. i'm pretty sure its the 60mm, because i got the one for the 2.5i rs.
nick06suby 1 year ago
@nick06suby
Just a question, did everything mount up fine with it being the GC instead of GD N1 ?
XxXDrummerxXx 1 year ago
@XxXDrummerxXx, one exhaust hanger didn't like up very well. but it was still able to connect. in order for the exhaust to line up i did have to buy the highflow cat and the headers. other wise i would have had to have the flange on the N1 cut and rewelded to make it line up with the factory side of the cat. hope that helps....
nick06suby 1 year ago
Do you have a check engine lights with that set up?
ImprezaHKS 1 year ago
@ImprezaHKS
I did get one when i would cruise on the freeway at 80mph for a long period of time, but that was it. all i did was disconnect my battery for a few minutes and it went away.
nick06suby 1 year ago
Quick question bro... Did you have your Injen CAI while filming your new setup?
P.S. Probably the best sounding impreza ive ever heard :) Well done
TheDudeNextToU 1 year ago
@TheDudeNextToU yes sir i do. thanks!
nick06suby 1 year ago
How hard is it to do the O2 sensor extension?
airsoftman687 1 year ago
i bought the o2 extension from a place online. i cant remember where. sonic something. i think.
nick06suby 1 year ago
Oh ok sweet where did you get your cat from?
airsoftman687 1 year ago
dude what makes the car sound like that i want my car to sound like that!!!
xozackxo45 2 years ago
it's the borla UEL headers, stromung high flow cat, apexi n1 cat back exhaust. O2 sensor extension, w/ spacer, jet hot coating on the headers and high flow cat.
nick06suby 2 years ago
whats a high flow cat??
xozackxo45 2 years ago
it just less restrictive then the stock catalytic converter.
nick06suby 2 years ago
ooo nicee!
xozackxo45 2 years ago
@xozackxo45 it's unequal length headers. put em on a civic and you'll get the wrx sound too.
ilovesilvia69 2 years ago
sounds great man!
06STiBOi 2 years ago 2
thanks a lot! I just ordered a Perrin CBE for my 09 wrx. so now its going to be legit
nick06suby 2 years ago
Yo i finally got the full race exhaust in it sounds nasty thanks agian
333Salvo 2 years ago
tha's awesome, congrats.
nick06suby 2 years ago
yo wat site did u get ur hole system on? it sounds sik so i wana put it on my 2.5i
boneman1331 2 years ago
wow u have cermamic coated that cat. did the ASPCA CALL U
Nikon89xj89 2 years ago
that aspca is the animal cops
Nikon89xj89 2 years ago
Did you put exhaust wrap around your header? or just the plan header? and did u get any check engine lights?
subymanMB 3 years ago
hey i just bought the exact same set up for my 07 2.5i. What kind, if any, mods did u have to do o make this fit. I know the 02 sensor extension. Is that it?
subymanMB 3 years ago
that and i put the o2 spacer on there. one of the exhaust hangers doen't line up very well, but it's not a big deal just tricky to get it on
nick06suby 3 years ago
hey whats up nice suby how much hp gain do u get from the headers
333Salvo 3 years ago
I'm not sure, I've had people tell me it pulls a lot harder then theres. but i don't have any numbers.
nick06suby 3 years ago
that and i put the o2 spacer on there. one of the exhaust hangers doen't line up very well, but it's not a big deal just tricky to get it on
nick06suby 3 years ago
well done on the note! Who did this and how much did it cost?
cazliberty 3 years ago
hey man, i have an 06 2.5 just like urs actually lol, im goin exhaust shopping, i already have the borlas and a cat delete track pipe but i need a cat back, after seeing this i checked apexi's website and the N1 is for wrx 2002+..did it still fit?
ESTEBON115 3 years ago
Great sound and Great job ive been trying to find a set of headers for my 06 2.5i. If anyone knows where could find some, i would gladly appreciate it.
greekgod929 3 years ago 2
wow. Amazingly well done comparison video, all should be like this. Anyway, that is a GREAT difference, sounds beastly for a 2.5i especially. Unequal length headers ftw!
KuostA 3 years ago 2
Thanks a lot i agree that they should come like this from the dealer.
nick06suby 3 years ago
im buyin a suby in a few months. 2.5 n/a for sure. now that i know i can get that dirty sound without the turbo. i would opt for the turbo but for 1 ppl in ontario are scared to race cause of the new laws. including me. and 2 insurance has got to be waaaaaaaaaay cheeper. how much was this set up. im thinkin of just getting them to make me custom unequal headers to like 2.5 all the way thru obviously upgrading cat rez and muffler. awsome care man. realy has put the icing on the cake for me.
DNALI 3 years ago