Dzięki za poradnik wszystko poszło tak jak powinno. Chociaż u mnie w "kroku 5", nie pokazywało w "Menedżerze urządzeń" tych sterowników. A jak ktoś przy "kroku 8" będzie miał cały czas "Downloading" to u mnie pomogło wyjęcie baterii, ponowne jej włożenie i podłączenie jeszcze raz telefonu, a nast. naciśnięcie "start"
hello i made the update and is done and is working nice... but i have a problem i donth have my 3G anymore... could you tell me some hints to reactivate it or something..ty whaiting for answer
hmm i think i have a problem everything was fine till i started odin... never show up those messages... i tryed other usb port even rebooted my pc 3 times
I clicked start in Odin but it doesn't install. Now it says 2:35 and counting and the Spica is at the downloading screen but no progress bar. Please! What should I do?
@voooyteq Powinno bez oczekiwania. Spróbuj inny port USB, zainstaluj ponownie sterowwniki, spradź czy telefon jest w Trybie download i czy dobrze go w tym trybie wykrywa menedżer urządzeń. Ostatecznie inny laptop
@Bestdressedpimp i found it: jou have to put it in download mode without cable, then put the cable in it, then wait till the driver is fully installed, and then, the right software would be installed for installing android 2.1
Worked fine for me except it's not got the homepage set to the network standard, but after installing KIES and updating it should be fine. For everyone else having problems try reflashing it and keeping it connected until the phone gets to the home screen.
Hi, i followed everything and after i flashed it.. it restarted but not all the way the an icon of the phone and a triangle with an "!" in the center, what do i do? I tried flashign afew times.. but it didn't work.
i did everything... step by step but in the last moment i dont back to screen system as in the video. i just see a telephone with a exclamation and if i try to put on my samsung, it doesnt start. what can i do?? my email: natxito22@hotmail.com
Udało się działa super był tylko problem z ustawieniem neta bo nie chciał się łączyć ale to juz indywidualny operator ma swoje ustawienia,wszystko jest do ogarnięcia. Dzięki za wyczerpujący poradnik pozdrawiam
spica rezolution is 320x480 galaxy 3 only 240x400
spica processor 800MGz galaxy only 667MGz
Aside from phones with 1GHz processors Spica is one of the most powerful mobile processor 800MGz and at an incredibile price on ebay italia cost only 190euro new
Hi! thanks for the video is very easy to follow it. I have a problem, everything is going ok, but when I open Odin, it doesnt read the phone, and the computer before did. And also if I try to upload files in ops, boot, phone..etc, I can only upload spica and spica_jc3.. its like it doesnt read the andorid 2.1 files... I dont know.. when I open it with winrar I dont get 4 white files, they are other winrar files, but the name is the same I see in the video (.tar)
after the upgrade for some reasson i can not acces my market place, internet browser or send text messages could you please help in solving this problem,, many thanks
@trebormightymint1 It's first time that someone have problem like yours, so it's not so easy to resolve it. First, try to reflash your phone once again and be sure you're using the right files (because it seem like it's a software problem - not only one module is down, but few - WiFi and GSM).
the folks at the forum say for firmware before jc3 have to flash to jc3 then i can use spica_jc3.ops....So Im a lil confused...once this is sorted out..I can flash :D
Megaupload niestety padł... Możesz wgrać jeszcze raz ten system plz...
MarcinMilosz1 1 week ago
telefon nie chce sie uruchomic laduje sie pasek do polowy i koniec i od nowa pomocy
TheFifastreet5 1 week ago
R.I.P Megaupload.... Please new Download link for android 2.1:)))
AlternativeDimnesion 3 weeks ago
Dobra zrobiłem działa ziomuś ;)
Dzięki wielkie.
michalmalecki12 1 month ago
A jak coś mi nie wypali to co się może stać ?
michalmalecki12 1 month ago
Dzięki za poradnik wszystko poszło tak jak powinno. Chociaż u mnie w "kroku 5", nie pokazywało w "Menedżerze urządzeń" tych sterowników. A jak ktoś przy "kroku 8" będzie miał cały czas "Downloading" to u mnie pomogło wyjęcie baterii, ponowne jej włożenie i podłączenie jeszcze raz telefonu, a nast. naciśnięcie "start"
l30n43X 2 months ago
thanks works fine with me....great job
tasmimy 2 months ago
hello i made the update and is done and is working nice... but i have a problem i donth have my 3G anymore... could you tell me some hints to reactivate it or something..ty whaiting for answer
ghyzmo4ever 2 months ago
@ghyzmo4ever Sorry I don't have Spica anymore :( Try re-flashing?
MTbak 2 months ago
Tutorial is ok, but music is shity. I had to mute it.
fiaccik 3 months ago
hmm i think i have a problem everything was fine till i started odin... never show up those messages... i tryed other usb port even rebooted my pc 3 times
ghyzmo4ever 3 months ago
hello if you are on could you answer me i have some questions... ty
ghyzmo4ever 3 months ago
work Cooll tenks man
MegaPoison007 3 months ago
Great work, Thanks...
arasuel 3 months ago
Stoji i pokazuje Downloading... czemu nic sie niedzieje?????
maks9684 4 months ago
@maks9684 mam to samo ...
Goral1995 3 months ago
Zajebiste dzięki wszystko działa
AdAmeK19942108 4 months ago
This has been flagged as spam show
Usb thing asks for a password to unpack....
endur0ttix 4 months ago
Usb thing asks for a password to unpack...
endur0ttix 4 months ago
@endur0ttix negative. none of files listed in desription need password
MTbak 4 months ago
@endur0ttix When i want to unpack the USB DRIVER.RAR it asks me for a password
endur0ttix 4 months ago
It says File blocked... you need a password...
endur0ttix 4 months ago
hi when i do what you said like the video it stay stuck on samsung it doesnt do anything what should i do
geraldberkley 4 months ago
dziekuje !!
Mkumati2 4 months ago
@Mkumati2 ależ proszę!! :)
MTbak 4 months ago
device is not reconized error when connected to USB port. what now?
MrArsenijeCarnojevic 4 months ago
You know when its on RESET. My phone just stays on start up screen even after its says PASS - anyone else have this problem?
ThePlurest 4 months ago
I LOVE YOU MAN my gti5700 was stuck on start up loop untill i did this i had to do it twice when you say select all the files
boot
phone
pda
csc i did but it didn't work so i restarted it with out csc like u in video and it worked thanks so much
p.s im not GAY!!!!!!!!
TheAndroider2012 4 months ago
@TheAndroider2012 yessssssssss that is it
jenkarq 3 months ago
I lost the 3g network bar how do i get it back :@
danmasterflex2 5 months ago
will the drivers in the description work with galaxy mini?
hyperkiller3 6 months ago
brilliant! the new OS looks sexy ;) haha
nicko9168 6 months ago
now i dont know why? but when i turned off USB DEBUGGING under Applications > Development.. it worked? :S
nicko9168 6 months ago
and how to add hebrew and arabic langauges for this new framework ???
bobosb36 6 months ago
to anyone's whos update wont start on odin.... i had this problem,
on your phone before you plug it in to the usb on the computer for the first time, go to...
Applications –> Settings –>Applications—> Development
Turn ON “USB debugging” mode.
that way it will install devices that will make it work!!!!
thanks!!!!
chribj 6 months ago
I clicked start in Odin but it doesn't install. Now it says 2:35 and counting and the Spica is at the downloading screen but no progress bar. Please! What should I do?
guidobertisch2 6 months ago
hey man what happend if it by the COM port mapping 1 ( COM 18)
and my phone doesn't start up :s
help,,
TheHemlen 6 months ago
Thanks for the great video,you should set up paypal for donations :)
superbrowndude 7 months ago
will i be able to upgrade even if i dont have kies?
MrDeathruler 7 months ago
what do i do after i download the driver? its in .RAR
commasnd0t 7 months ago
@commasnd0t Google win rar and download it,then extract the rar file you downloaded to a new folder
superbrowndude 7 months ago
Thanks a lot ! Now I'm running Android 2.1 on my Smartphone. Performance is much better !
Rocha254 7 months ago
Thx Man :)
IdegAllat 7 months ago
Tanks alot man it fully work like yours mob..Thanks again
1996MrNoor 7 months ago
if I mess up, will iy ruin the phone?
hyperkiller3 7 months ago
@hyperkiller3 nope :)
MTbak 7 months ago
THanx you man !! KING ! of updaters in my memories and subscribe :)
pacmanko4 7 months ago
IT WORKED AWESOME MAN !!! :D
I LOVE U!!! :D
born2bewild120 8 months ago
How come mine doesn't come up with the yellow COM number? :(
ThePunkMatic 8 months ago
It looks like everything written on your computer was done by a dyslexic person
ThePunkMatic 8 months ago
It worked! THX! :)
Mantvukx2 8 months ago
Thank you very much men..! 18/june/2011.
argenisdelima 8 months ago
WoW! Amazingly easy! Thank you ery much!
Buky30 9 months ago
its alwas says "check image files"
spicacoo 9 months ago
Great work, very well detailed - thanks for taking the time to put this together.
SirBearBot 10 months ago
jak długo powinien sie łączyc (setup connection) w odinie bo mi juz 6 minut i nic nie drgnęło.. ;/
voooyteq 10 months ago
@voooyteq Powinno bez oczekiwania. Spróbuj inny port USB, zainstaluj ponownie sterowwniki, spradź czy telefon jest w Trybie download i czy dobrze go w tym trybie wykrywa menedżer urządzeń. Ostatecznie inny laptop
MTbak 10 months ago
it worked all good but i lost all my contacts on my phone what should i do
sameshit12 10 months ago
it worked all good but after all i have no more contacts on my phone i have nothing what should i do
sameshit12 10 months ago
im at 4:00 on odin and it has no progress, it says 1 setup connectoin ...
gFrenken97 11 months ago
@gFrenken97 try another USB port, try to install drivers once agai, try another computer
MTbak 11 months ago
@MTbak ok ill try the laptop downstairs
gFrenken97 11 months ago
@gFrenken97 it's happening the same to me !!
Bestdressedpimp 11 months ago
@Bestdressedpimp i found it: jou have to put it in download mode without cable, then put the cable in it, then wait till the driver is fully installed, and then, the right software would be installed for installing android 2.1
gFrenken97 11 months ago
woho, its working. if any1 has same problem, plug your usb into the pc first then into the phone. :)
kam3003 11 months ago
Comment removed
Bestdressedpimp 11 months ago
hi, ive done everything according to the video but when i connect my phone odin doesnt pik it up.
kam3003 11 months ago
@kam3003 install kies 2.0
Bestdressedpimp 11 months ago
where can i download the driver?
duckerjimmy 11 months ago
@duckerjimmy see description :)
MTbak 11 months ago
Worked fine for me except it's not got the homepage set to the network standard, but after installing KIES and updating it should be fine. For everyone else having problems try reflashing it and keeping it connected until the phone gets to the home screen.
stonforcebassbohab 1 year ago
U mnie wszystko ok do czasu "Start" Po tym nic się nie dzieje telefon nie chce pobierać plików do siebie
Torrronto123 1 year ago
in com port mapping write to me i com 27? ? u i com 7
what i do wrong
??
prokrousti 1 year ago
ahhh thanks a lot work took me 2 hours did it 4 time s
roberghost4545 1 year ago
pls help phone is not starting helppppppppppp.....
celez1 1 year ago
hi i just followed the steps but after every thing it gave me an error ! in a trangle
celez1 1 year ago
@celez1 I have the same thing!! did you find out how to fix it?
manhattenhero 1 year ago
do i need to have the samsung pc installed.. pls helllllpppp
MrMIKEL83 1 year ago
@MrMIKEL83 No.
stonforcebassbohab 1 year ago
I MUST BE DUMB ..I CANT DO IT..HEEEEEEEEELLLLLPPPPPP!!!!!!!!!!!!PLEASE
MrMIKEL83 1 year ago
i forget my draw pattern is there any possiblity to start the mobile now there are some very important thing in my mobile ... can any body help me
lovlelysambo 1 year ago
YOU ARE THE BEST MAN
MrPfnog1 1 year ago
Hi Some one of you guys has tried it with 1.5 version? I mean my phone is in cupcake now can i proceed?
goyox86 1 year ago
thanks..... really thanks... i am from chile and all this worked succesfull!!!!!
bodoiron 1 year ago
@bodoiron amigo que version d tenias antes de hacer el upgrade?
goyox86 1 year ago
@goyox86 tenia el 1.5 :D
bodoiron 11 months ago
Hi, i followed everything and after i flashed it.. it restarted but not all the way the an icon of the phone and a triangle with an "!" in the center, what do i do? I tried flashign afew times.. but it didn't work.
ZeiferZ 1 year ago
@ZeiferZ I got the same damn triangle I freaked out what do I do?
manhattenhero 1 year ago
@manhattenhero Try reflashing it.
stonforcebassbohab 1 year ago
please answer me
chugi123 1 year ago
hey you in csc you put none?
chugi123 1 year ago
This has been flagged as spam show
i did everything... step by step but in the last moment i dont back to screen system as in the video. i just see a telephone with a exclamation and if i try to put on my samsung, it doesnt start. what can i do?? my email: natxito22@hotmail.com
Thanks
nachobigclap 1 year ago
Udało się działa super był tylko problem z ustawieniem neta bo nie chciał się łączyć ale to juz indywidualny operator ma swoje ustawienia,wszystko jest do ogarnięcia. Dzięki za wyczerpujący poradnik pozdrawiam
krzysiekho 1 year ago
This has been flagged as spam show
this is better then galaxy 3 (appolo) because :
spica rezolution is 320x480 galaxy 3 only 240x400
spica processor 800MGz galaxy only 667MGz
Aside from phones with 1GHz processors Spica is one of the most powerful mobile processor 800MGz and at an incredibile price on ebay italia cost only 190euro new
sopocrin 1 year ago
How do u downlad the drivers
N android 2.1 whats the difference?
smoothBUTsketchy 1 year ago
Aha, jeszcze mam pytanie... Czy to co pokazujesz równa się z wykonaniem roota?
Będę mógł instalować sterowniki 3rd-party jak Multi-Touch czy TomeQ GLSL?
q009q009 1 year ago
Szczerze: jeszcze nigdy nie widziałem tak dobrze wykonanego tutoriala! :)
Od razu z niego skorzystam jak tylko kupię (a to jest pewne) Samsung i5700
q009q009 1 year ago
thanxxxxxx bro
MrSarathnair 1 year ago
Hi! thanks for the video is very easy to follow it. I have a problem, everything is going ok, but when I open Odin, it doesnt read the phone, and the computer before did. And also if I try to upload files in ops, boot, phone..etc, I can only upload spica and spica_jc3.. its like it doesnt read the andorid 2.1 files... I dont know.. when I open it with winrar I dont get 4 white files, they are other winrar files, but the name is the same I see in the video (.tar)
I've made3 times..what can i do?
laura2498 1 year ago
to było długie i bolesne, ale udało się!
dziabniety 1 year ago
@dziabniety Brawo! :)
MTbak 1 year ago
This has been flagged as spam show
hello
all process completed
and reboot SAMSUNG stuck.......
please help what to do
chandny2009@gmail.com
vikasmeenu 1 year ago
Is it safe / is it an official SAMSUNG update?
TheMrAnderz 1 year ago
hey MTbak,,why does my spica doesnt restart soon? it just hung...
dudonemo 1 year ago
@dudonemo For me it's taking about 3-7 minutes. Try to flash again and see.
MTbak 1 year ago
hi..is it really takes too long to reboot after sa odin software reset?
dudonemo 1 year ago
hi...i followed all your steps but the odin multioader didnt start downloading the files to my phone, it just hung....why?
dlk6666 1 year ago
@dlk6666 Make sure you have installed drivers and if yes - try another USB Port
MTbak 1 year ago
Hi......i am from south africa....will this work on my phone(i want it in English). Pls let me know asap
dlk6666 1 year ago
@dlk6666 yes, it will work on any i5700
MTbak 1 year ago
@MTbak u sure ... i mean i will try to do wt u did .. but if it did not work and i get a freaking triangle shit i would kill ya XD
callofdutymw2trane 11 months ago
@MTbak u sure ... i mean i will try to do wt u did .. but if it did not work and i get a freaking triangle shit i would kill ya XD
callofdutymw2trane 11 months ago
after the upgrade for some reasson i can not acces my market place, internet browser or send text messages could you please help in solving this problem,, many thanks
trebormightymint1 1 year ago
@trebormightymint1 It's first time that someone have problem like yours, so it's not so easy to resolve it. First, try to reflash your phone once again and be sure you're using the right files (because it seem like it's a software problem - not only one module is down, but few - WiFi and GSM).
MTbak 1 year ago
will it enable multi touch?
Kresno1306 1 year ago
jaki android mniales wczesiniej
lluki111 1 year ago
@lluki111 już wcześniej przeprowadziłem aktualizację więc również 2.1
MTbak 1 year ago
elegancko wykonany tutorial!!
elgorajo 1 year ago
Point 4. on 00:10 moment. Read again.
MTbak 1 year ago
Comment removed
diegobran89 1 year ago
Comment removed
diegobran89 1 year ago
Comment removed
diegobran89 1 year ago
Thank you! I have only one question. The firmware it´s a MOD or it´s the actual version of android 2.1 ?
diegobran89 1 year ago
how to do it on Windows HP ??? :)))
ajmogrobari 1 year ago
@ajmogrobari But HP Vista or 7?
MTbak 1 year ago
@MTbak sorry i spell wrong Windows XP :)))
ajmogrobari 1 year ago
@MTbak i wrong speel Windows XP xD :)))))
ajmogrobari 1 year ago
@ajmogrobari yeah, ok :) for XP try the same tutorial.
MTbak 1 year ago
@MTbak txn i will try to do it now... :)
ajmogrobari 1 year ago
@MTbak sorry i bother you but i cant find ADB Interface and Modemy.... pls help !
ajmogrobari 1 year ago
Czy kupując telefon z Ery/Play robię w ten sam sposób?
Czy to jest wersja Androida 2.1 w wersji oficjalnej czy zmodowana dla Spica?
Czy po tym update będą się pobierały ewentualne przyszłe poprawki przez wi-fi?
marcingryba 1 year ago
@marcingryba
Ad. 1 - Tak, branding nie robi różnicy.
Ad. 2 - Jest to OFICJALNA WERSJA DLA SPICY - kazdy telefon ma odpowiedni ROM (portowanie klawiszy etc...)
Ad. 3 - Jedynie aktualizacje aplikacji poprzez Android Market. Oprogramowanie Aktualizuje się jedynie przez programy takie jak Odin.
MTbak 1 year ago
Thanks for the detailed video! very well done! I am new to the spica fan club
baseband version- i570EJXJC2
Build- ECLAIR.JPJD7
Kernel version- 2.6.29 mobilus@SE-s606 #2
firmware 2.1 update-1
can i use spica3 ops? as mine is jc2...
hitmanstrikes 1 year ago
@hitmanstrikes yes, you should use "spica_jc3.ops" every time, when you're going to install Android 2.X series :)
MTbak 1 year ago
@MTbak
the folks at the forum say for firmware before jc3 have to flash to jc3 then i can use spica_jc3.ops....So Im a lil confused...once this is sorted out..I can flash :D
hitmanstrikes 1 year ago
@hitmanstrikes You have to use "spica_jc3.ops" when you're flashing with firmware higher than JC3. In video we're using JF2.
You don't have to flash to JC3, you can flash to JF2.
MTbak 1 year ago