@KartRacer695 No it is not a direct bolt in. You have to modify left front fork , the brake plate and the spacer to fit the z wheel. The front triple clamps bolt right in without doing any thing.
Sorry can't do it. That blaster has been heavily modified since those videos were taken. I'd have to have at least $4,000 and I would still lose money on it. Everything but stroking has been done. It doesn't run or handle like a regular blaster anymore.
The entire suspension. The Modified front forks, Modified brake plate, triple clamps, bar clamps, brake cable extension, front axle and cut spacers, Modified rear swingarm, rear shocks and lengthed rear brake rod, chain guide and I'll make a new guide for you as well. Everything to change it out in a bit more than an hour. I have way more then this in buying the parts not too mention time in fitting the parts.
Carlisle Snow Hogs 480x8 best tires for a Z50 in the dirt. I'm setting my Z up for ice racing this winter, those suspension upgrades look nice. Z50 the original pit bikes!
It will not just bolt on. The frame of the z50 is actually wider then the xr75/80. Also there isn't a brake stop/beg on the xr75/80 swing arm that is on the 50 swingarm. The peg indexes the slot in the brake plate to keep it from rotating. The xr70/80 used a brake stay rod to stop the brake hub.
To make it work you need to make the space for the frame wider, Just grind about 1/4 inch from each swingarm bushing.The have a piece of 1/2 steel rod welded on to the swingarm for a brake stay.
It is a cheap $100 Aiptek SD video camera. It does good video but the mic is junk and over sensitive. Anything recorded close or if you talk will cause the recording level to clip out. I use it in the woods, if it gets mud on it or broke it doesn't matter.
just buy an pitbike gosh..
blasterowner 1 year ago
Watch my other videos. I have a SDG Pro Mini 125 with a YX140 and a RM125. They are all fun but I love the z50. You can't beat that wide soft seat.
mtpratt32 1 year ago
hey nice bike, does the front wheel bolt right in the crf70 front shocks with no problem?
KartRacer695 1 year ago
@KartRacer695 No it is not a direct bolt in. You have to modify left front fork , the brake plate and the spacer to fit the z wheel. The front triple clamps bolt right in without doing any thing.
mtpratt32 1 year ago
@mtpratt32
ok great thanks.
KartRacer695 1 year ago
i dont think you should have modified it because it will break earlier
masterchief658 1 year ago
I don't think it will. I used all honda parts, so the reliability shouldn't be in question.
It will only break soon because it now gets beat harder. It is a much better bike, now.
mtpratt32 1 year ago
wat year xr80 is that swingarm off??
sickwillys55 2 years ago
it was an '82. It doesn't really matter all xr75 and xr80 dual shock swingarms are the same.
mtpratt32 2 years ago
hey i was wondering if you would trade a xr80r for your sons laster
jlrmaxx 2 years ago
Sorry can't do it. That blaster has been heavily modified since those videos were taken. I'd have to have at least $4,000 and I would still lose money on it. Everything but stroking has been done. It doesn't run or handle like a regular blaster anymore.
mtpratt32 2 years ago
The entire suspension. The Modified front forks, Modified brake plate, triple clamps, bar clamps, brake cable extension, front axle and cut spacers, Modified rear swingarm, rear shocks and lengthed rear brake rod, chain guide and I'll make a new guide for you as well. Everything to change it out in a bit more than an hour. I have way more then this in buying the parts not too mention time in fitting the parts.
mtpratt32 2 years ago
Carlisle Snow Hogs 480x8 best tires for a Z50 in the dirt. I'm setting my Z up for ice racing this winter, those suspension upgrades look nice. Z50 the original pit bikes!
lowtechresistance 2 years ago
I'll sell you all the mods for 200 plus shipping. Everything needed to just bolt on.
mtpratt32 2 years ago
interesting, if you could message me a list of the mods. I'm assuming you don't mean the entire front end right? Just the lower forks and rear?
Lemme know thanks.
lowtechresistance 2 years ago
hey im just wondering i got a z50 would xr75 or xr80 rear suspension just bolt on my stockk z50 swingarm and everything message me soon please thanks
cewlwip 2 years ago
It will not just bolt on. The frame of the z50 is actually wider then the xr75/80. Also there isn't a brake stop/beg on the xr75/80 swing arm that is on the 50 swingarm. The peg indexes the slot in the brake plate to keep it from rotating. The xr70/80 used a brake stay rod to stop the brake hub.
To make it work you need to make the space for the frame wider, Just grind about 1/4 inch from each swingarm bushing.The have a piece of 1/2 steel rod welded on to the swingarm for a brake stay.
mtpratt32 2 years ago
ok thanks
cewlwip 2 years ago
or did u mean xr70?
reilly50s 2 years ago
need to stop talking right into the mic note to you
nahtan14 2 years ago
It is a cheap $100 Aiptek SD video camera. It does good video but the mic is junk and over sensitive. Anything recorded close or if you talk will cause the recording level to clip out. I use it in the woods, if it gets mud on it or broke it doesn't matter.
mtpratt32 2 years ago
Nice Z man. Good job getting the Z50 wheel in the XR forks.
TheAlexManVideos 2 years ago
there not xr50 forks
reilly50s 2 years ago
I didn't say XR50. I said XR. I was referring to the XR70.
TheAlexManVideos 2 years ago