toyota tacoma exhaust 4cylinder

[Barracuda340000]

nice truck. Does it have a lift? I can't really tell from the angle.

[ezlivn89]

@Barracuda340000 3 inch, i have to get a new vid up still, but those are stock wheels and some skinny 33's

[jcoopa123]

not bad for a 4 cylinder

[TheChessmaster09]

is this the flowmaster delta 40? im thinking of either a cherry bomb vortex, or delta 40 on my 4 cyl. any suggestions?

[hughestyler1]

nice video ...my mazda b2300 with long tube header 50 series flowmaster and 2/1/4 pipe all the way sounds like that lol might put the 40series and give it a deeper tone on my truck...lol

[XboxReleases]

mexican taillights

[breiland941]

any headers or anything? or just exhaust?

[ezlivn89]

this was only a flowmaster, since then i have added a high flow cat, and a header, much louder and sounds nicer than this

[nickmiller93]

Buhundred is just pissed because ur exhaust diameter is bigger than his dick, he said the same thing about my runner

[BuhundredReturns]

I'm not pissed at all. After research I found that it's fine. I mean, why would Borla, Gibson, or even TRD make an exhaust system that screws up your power? Your comment is retarded and obviously if you mean it then you must have disturbing thoughts.

[BuhundredReturns]

2.5 piping is way to big for the little 2.7. I wouldn't even use 2.5 piping on a 3.4! If it were a supercharged 3.4 then 2.5 would be better.

[ezlivn89]

naw its really not though, i get a shit load of compliments on how good it sounds, it gets better milage,better power, smoother acceleration. with everything that is on the truck, that you dont know about its exactly the type of piping i would want to run. There is alot of motorwork done to the truck now so the 2.7 works perfectly with the piping im running. and if you wouldnt use that 2.5 piping on a 3.4 your a dumbass. i know guys running duel 2.5 off there 3.4 tacomas, all run better

[BuhundredReturns]

Not saying anthing bad, check out Yotatech forums, they would tell you to use 2.25 piping on the 3.4. If the 3.4 were supercharged then they say it would be better to run 2.5 pipes. What kind of motor work do you have done? Truck does sound great though.

[ezlivn89]

very mild set of cams, port polish on the intake manifold, computer changes, bigger throttle body, bigger fuel injectors, a few other random engine tweaks. trucks got alot of torque.

[RidgeRunner88]

@ezlivn89 Hmm... You must not build engines, huh?

[ezlivn89]

@RidgeRunner88 not sure what your implying? are you asking if i designed the engine? no, did i build it from the ground up? no, did all the stuff that been done so far get done at a toyota specialist shop? yes, did they set it up so that it will eventually run everything i want? yes, is it setup so that my future plans for the truck work perfectly with everything else one there? yes....everything on the truck is designed for future? work yes

[djbreiland]

Hey bro.. i got the same truck. (less awesome) but how much did that flowmaster cost you? and is it easy to install? thanks dude

[ezlivn89]

it was like 120 i think, i got it proffessionally installed, same with the high flow cat, and its was 350 install with only the flowmaster, cause i got 2 1/2 in piping, to the 3inch tip. the cat cost 250 with install for the high flow cat.

[chrisg3210]

Dude, that sounds bad ass! Which Flowmaster series kit did u install on it?

[ezlivn89]

super 40 series

[F150TuffTruckman]

Best sounding 4-popper I've heard!

[ezlivn89]

thanks bro appreciate it

[F150TuffTruckman]

Are you sure that's not a V6? Don't mean to insult your intelligence, just checking.

[ezlivn89]

i am positive because its my truck, next video i will do a walk around of the truck so you can see the motor... its a 4 banger

[F150TuffTruckman]

Did you do anything to your cats?

[ezlivn89]

um, well kinda, since its gotten that after market one, i blew the middle of it out, somehow, so the cat really isnt doin much anymore

[wcsballer11]

thats not a 3.4?

[ezlivn89]

nope thats the 2.7l 4 banger

[perfoodleschnitz]

I prefer these wheels over the ones in your other video. It sounds pretty nice.

[knotsinthewood]

how much did the exaust cost, did you put it on yourself?

[ezlivn89]

cost 350, and i had a local shop do it because they could really put up underneath and as high as possible for when i go wheeling

[TrailBear]

What type of flowmaster is on there man? i wanna get one lol

[ezlivn89]

60 series, u should watch the other vid with the high flow cat, its a lil bit deeper

[ezlivn89]

dude i was wrong i have the super 40 series flowmaster

[highlandsucks]

you got some hoses hanging

[ezlivn89]

lol good observation, but thats the garden hose

[geadbdiy]

does ur truck have balls???

[ezlivn89]

what the hell do u mean?

[geadbdiy]

does it have torque??

[ezlivn89]

acutally yea, more than expected, but peels rubber easy, can get the tires spinning really easy, enough torque to pull our 19ft boat, which weighs more than my truck, pulls out all my friends when we are wheeling, so iguess if thats what u wanna know

[Beatleologist]

I have an '03 Tacoma TRD with a 4 cylinder and catback dual FlowMaster. Sounds MUCH throatier than this.

[ezlivn89]

i doubt that bub, this is done with a low quality camera, and this isnt how my truck sounds, u got to listen to the truck with the high flow cat, my other video, secondly, ive heard the dual exhaust with headers with flowmaster, it sounded tooo much like a ricer to me, throaty maybe at low rpms, but i got continous throat while driving from 1500-4500 rpm

[josherz88]

that sounds pretty alright for being a 4cylinder!

[DRZSuzook]

where did u get yours? mine is an extended cab like yours too...

[DRZSuzook]

hey man, sounds really nice. what year is that, cuz i have a 97 tacoma exten. cab 4wd, 2.7, 2-door and cant find an exhaust for it...! sweet taco btw!

[paintballur]

nice