AR-15 M4 M16 ZOMBIE LOWER FROM SPIKES TACTICAL COMPLETELY AWESOME!

[excurrahee]

Yeah, having a pretend auto selector with a cool sounding name makes it neat right!

[1x8twist]

NILLAOOOARMS im not knocking your vid, it's pretty good and i injoyed it. I hope you got your hands on a good lower. I have 4 pree 08 spikes tactical AR/15s that i built and they kick the shit out of every thing out there. After the 2nd lower i sent back to spikes tactical for replacement they told me to kick rocks, OK! that i will do. I am placing my first order with (NOVESKE) next wed. They will have a costomer for life as long as there no stupid EGO! trip involved.

[1x8twist]

SPIKES! sucks they make a chinese knock off the Beloved AR/15 at best hence the last 5 lowers iv bought where of a very low quality that would belong on a walmart shelf. They are deburring with a die grinder by hand with unskilled labor WRECKING any chance of quality. Shit they are even deburring the trigger pin holes to the point of qountersinking the edges. lossing 0.065 of matereal. This is lost surfice area for the trigger pins = FAIL Anyway NILLAOOOARMS

[1x8twist]

NILLAOOOARMS roger that but i think i will end up paying the trans fee, Im in the communist state of ca. i will let you know what happens? also thay started dee burring the rear edge of the lower where the extention tube goe's. that area DON'T need to be dee burred GOD! DAMMIT! LOL!

[1x8twist]

NILLAOOOARMS Thanks bro good vid bay the way and ya i will cool off and get around to sending them back. I will have to pay the transpher fee AGAIN! oh well. I think what is going on right now is thay are just pumpping them out a bit to fast. Spikes use to be my FAV! i have an airo that suffers the same prob so realy its not just spikes. The main problem with my spikes is the rear trigger guard roll pine holes are drilled to the upper edge, like about a 16th of an inch away from the edge. FAIL!

[NILLA000ARMS]

@1x8twist actually is there lowers are defective and you send it back it should work the same way as a gun no ffl fee and they should be able to send them back to you!

[1x8twist]

Spikes use to be a good AR but as of lately the last 3 lowers i have bought SUCK! SHIT! fit and finish are crapy at best. I can back that up buy the 3 lowers i thrue as far back in my closet as i could. I would not even give them away out of the guilty nightmare it would give me.

[NILLA000ARMS]

@1x8twist you need to call them! ask for spike even!!! ive only had a problem with them once and i got spike and he was like what now? ill take care of this right away lol....

[scuds03]

I have that same lower but where there is brown on your zombie my zombie is bright red. For the money its a great lower so far!

[NILLA000ARMS]

@scuds03 yes i had mine custom done. i called them up and talked them and decided to make it a little unique lol

[Sennanchie]

So cool man. I so want one of these bad boys. I'm not sure weather to buy a stripped lower then the LPK and collapsible stock or just get a "completed" lower. I think the $ is going to be about the same give or take a couple of dollars. But I'm leaning towards just getting the entire completed then just buy an upper then it will be done with. Any suggestions on where to buy a completed lower for a good price please do tell. Thanx ... and peace out Zombie killer!!

[NILLA000ARMS]

@Sennanchie if you know how to put it together its ok otherwise id just buy complete

[Sennanchie]

@NILLA000ARMS Wow, that was fast. You must have been sitting on your computer at the same time. lol. Yeah... not to mention it's almost the exact amount of money too. Think I'm gonna pick me one up on GB for $230.00 (inc shipping). Only thing is I can only get the Punisher or Spider. The Zombie (uncolored) is another $25 or $40 more colored. But I want it more than the others and I can always paint it myself . Thanx dude.

[NILLA000ARMS]

@Sennanchie you know you can get it direct from spikes tactical right?

[Sennanchie]

@NILLA000ARMS I know I can get the uppers there. But can I get the "complete" lower with the colored Zombie there for around the same price?

[NILLA000ARMS]

@Sennanchie cheaper

[NILLA000ARMS]

lowerr

[Sennanchie]

@NILLA000ARMS No, I just checked. They are quite a bit more expensive than I can get them for on gunbroker. Their (Spikes website) cheapest "complete" is $275. I can get it $230 shipped on GB. Thanks tho

[NILLA000ARMS]

@Sennanchie werd they used to be cheaper. question is what are they using as parts kit though. id ask

[Sennanchie]

@NILLA000ARMS I did ask actually. The guy selling the zombie logos (who's more $) is using the Del-ton lpk, the other one is using RRA, which is the better as far as I am aware of. Unfortunately the one with the RRA is only selling the "Punisher" logos at this time. I know it's only cosmetics, but the zombie is way cool and it's what I want, but $40 more is kind of a lot to pay just for a different logo.

[NILLA000ARMS]

@Sennanchie i guess the only thing i can suggest is when they have there 50% off lower sale and get a lpk and put it in

[Sennanchie]

@NILLA000ARMS I heard RRA 's lower parts kit is actually better than Spikes. Spent hours reading forums today and RRA kept coming up as the winner. Also Grant and Gieselle triggers for the highest quality. I want THE best LPK. Money is no object. But thanks man.

[NILLA000ARMS]

@Sennanchie lower

[Jayr0cc187]

sci fi, zombie fan, they need to make a new season of the walking dead or something....oh yea and awesome rifle. I was looking at the punisher ones and all, zombie one is on my list.

[NILLA000ARMS]

@Jayr0cc187 actually man i just listed my zombie ar-15 on gunbroker! cant send a link via youtube but ill shoot you a message with the link

[DemonicWeapons]

Will this fit on the M&P 15-22?

[NILLA000ARMS]

@DemonicWeapons not compatible sorry

[jcwoodstl]

Creepy, I'm wearing those exact same pants right now

[NILLA000ARMS]

@jcwoodstl lol got to love it right.... lol

[uhhhhNick]

Same lower I'm using on my build, luckily I live like 30 minutes from spikes tactical's warehouse in apopka,fl so I can pick it up in store.

Can't wait to get it.

[NILLA000ARMS]

@terminaiter0327 thats right



[sharpshooternick]

dude thats sweet!

[NILLA000ARMS]

@sharpshooternick indeed!

[EscpdFrmPsykward]

Nice. You think they would do some custom engraving? Like on the other side of the magwell put something like, "For Zombie Disposal Only All Other Use Prohibited" That would be pretty cool. lol.

[NILLA000ARMS]

@EscpdFrmPsykward yes they do custom engravings just ask. i think its like 30 bucks though... mainly to set it up computer wise

[NILLA000ARMS]

@EscpdFrmPsykward yes they do custom engravings just ask. i think its like 30 bucks though... mainly to set it up computer wise

[famasdan]

whered you get the grip? i had one like that on the 74 but havn't seen them for the ar

[NILLA000ARMS]

@famasdan i sell them its a israli type let me know if i can ring you up one and if anything else