HEY I Have a HP Pavillion-DV 6000 With Intel Core i-3 370m but how can i detect my Motherboard without ripping my laptop apart please answer back.......
I got 3 min into this and just had to move to another tutorial. The music is not helping. I can turn it down but I keep thinking he gonna say something I'll miss. Yeah I can rewind and restart it. Ah Nevermind
I have a Dv6 with Intel core 2 T6600 duo and chipset PM45, Southbridge Model 82801IM (ICH9-M). Motherboard quanta 3628. I need to know the model of PLL! :)
ok the cooler is covering two chips the processor and the other chip what is ti?? my computer only has one arm and is for the processor i would like to know what is the other chip your cooler is covering??
I have an asus ul30a but i want to have a better vid card n processor..im thinking of buying the motherboard of ul30jt so that it can support da vid card n processor..is it worth doing that or should i buy the entire laptop..?
Shoud I buy an specific processor to Hp Dv-6? or any processor I like this: Intel Pentium 4 3.8GHz 800MHz 1MB Socket 775 CPU is it 3.8 Ghz or 800 mhz?
Precision Division specializes in circuit-level laptop motherboard repair. Repairs are performed at a computer controlled dark infrared rework station and monitored by continuous ESD event detection by 3M.
I want to replace my HP Pavillion Dv6000 processer and i want to know if it is possible? if it is can someone show me a cheap website where i can buy a new one?:)
Can someone help me with something? I have a problem with my hp laptop. Whenever I turned it on there's a loud scratching noise like the fan is broken or it's hitting something. How would I fix it? Do I need to change the fan or is it just useless to fix it?
i got a question hope your able to answer my question ^^. The part of the laptop where the charger goes, what its called? and can i fix it? its a bit melted bit worried that something might happen to my laptop.
Are there any guides of how I can remove my Graphics card + CPU on my HP Pavilion DV6? I got a ATI Radeon HD 4350 and AMD Athlon II-Dual Core M320 2.1 GHZ
I want to replace the motherboard in my laptop of the same kind in this video, but I am afraid that the new motherboard will have some variances that will not fit or work in my current laptop. Is there anything I can do to insure I get the correct motherboard the first time?
You're a pro! I spilled coffee on my old Compaq Evo N1000v which rendered it powerless. What do you think are the parts that were damaged or affected by the spillage. Thanks for your help.
good video, i need with my dv6000 i m running it on windows 7 and i have a battery error " consider replacing your battery" and i replaced the battery and still the same error. can u please help me thank you
Try my copper shim to greatly lower your gpu temps. It is a perfect fit and only $5. Search for DV6000 Copper Shim on ebay. Also comes with thermal paste free.
Try my copper shim instead of the stock thermal pad to greatly lower gpu temps. It is a perfect fit and only $5. Comes with thermal paste free. Search for "dv6000 copper shim on ebay".
Are you like many that have problems with a constant PC crash every time you turn your computer on?Well if that's your case check out the link in my profile
@Astroman89 That is too true. I fucking had HP replace my wireless card for free, and then as soon as the warranty was up, it went bad again( because they replaced it with more shitty stuff).
@gridsinister If you had this model or a similar one, chances are your wireless didn't actually go bad. This board has a defect in it, one of the symptoms is the wireless stops working..it's not the card, but actually the board, the only temporary fix is to get a USB wireless adapter until the laptop stops working all together, the other symptoms include the screen not coming on, not turning on at all, or only turning on sometimes.
hey i really need ur help right now, the other day my house pwer went down and i was at work, and i didn't unplug my laptop, so that basiclly mess up my mother boad of my dv7 1245dx i don't know should i do and i don't have enough money to buy a new laptop, do you have any suggestion, please i reallly need your help
im not gonna do this.... too hard :D and i have an hp laptop dv 8 ! but i want to upgrade ram to 8 gb ! is it at the back of my laptop ? i have 18.4 inch screen
Hey thanks very much for the video! I've used it twice now to disassembly (and most importantly, reassembly) my laptop just to unblock the fan vents and stop GPU & CPU overheating. Would have been impossible without this excellent video.
Is there an easier way to clear out all the dust (rather than taking the whole computer apart) and or stop the dust from getting in there in the first place?
@sparepartworld last time i tried this i blew up the motherboard.... now i 'm having problem with the dvd it plays when it feels like it, now it just running but wont play i restored the laptop but still wont play anything just keep running now i'm thinking of open it and take a look at the cable but i'm worried not to know how to put it back in again. it's the same model, any advice??
@Burkhardj The mat is the best was to protect against ESD not to mention it doesn't look like he is doing it in a house which means no carpet to make easy static. You sir maybe should go back to hardware basics and read this book: ISBN-13: 978-1-4354-9778-8 Anyways, Carry on...
@Burkhardj profesionals don't need anti static belt, we have such easyer tricks. And we don't forget the thermal paste, there are thermal pads. We repair damaged notebooks, and the most notebooks, which are become damaged, are not new...
I've repaired tons of computers, I've never needed anti-static belts. You ground yourself before working to stop discharge. Thermal Paste is really n/a either, if you're working on a Notebook, you use Thermal Pads. Believe me, you DONT want thermal paste on a motherboard.
Don't need antistatic belt (what are you from the 70s?), there are much easier methods of 'discharging' oneself
There is a thermal pad, removing it would be laborious, time consuming, and ultimately pointless, thats why its a thermal pad, it doesn;t need replacing (most often)
Ich habe auch ein HP DV6733eg und bin unzufrieden, mein Laptop geht bei überhitzung immer aus nun tausch ich das Mainboard aus und hoffe das es funktioniert.
Hey, I have a Pavillion dv6449us. It is all I have to use for gaming. I want to replace my video card with something newer. Would that be possible? I cannot find any disassembly manuals on the internet.
i have a question. i saw a laptop with a core duo ultra 2.5 ghz(amd) and there was 6gbs of ram. is all the ram even going to be used when the cpu usage is maxed out, since the ghz isn't even that high?
This is a group for anyone who has faced problems with hp products specialy laptops. One defect of the Hp pavilion laptops ( DV 2000, 6000, 9000) is the motherboard problem and VGA ( graphics card ). Perhaps together we can bring this aware to HP.
facebook /group ( .php )?gid=110390745653221
OR look for : let's say no for HP products - لنقل معا لا لمنتجات اتش بي
did you use thermal compound between d cpu, video chip, b4 you put d heat sink???
if you do! do you need to heat up the video chip for it work properly or you can just put it on n it will work! i need to know this anyone plz?? thanks
I need some help, i accidentally, while cleanin it, pop out the esc key, the keyboard is fine, just the esc key is now in my hand, am i try to put it again, but im afraid that i can't. I dont broke anithing, bya miracle, hehehe, and the esc key (or where it used to be) works fine. Anyone that can kindly help me, with a video or a pic tutorial, you know, because this lap is of my boss, and i think he can get really mad if he see teh computer one of these days.
you don't do anything to the factory installed pcm pads on the gpu or cpu, or replace the heat conductive pad on the northbridge with copper, as some suggest. so how reliable is the replaced board in the long run? no issues due to bad cooling?
Hey, I have dv6000 laptop and when i turn it on, it turns on, then shuts off, then keeps repeating itself until I turn it off manually. My motherboard has went out several times before, and I have got it replaced by HP, so i bought a motherboard, and just installed it. When i put everything back together, it did the same exact thing.. It would turn on, and turn off, over and over again. Got any idea what else it could be, besides my mobo?
@PrinceOfTheElite I've taken the RAM out, started it, and it just keeps restarting, I've taken the harddrive out, and the same thing also, just keeps restarting over and over.... Any other ideas?
Awesome video!! i have a question though. i watched your video many times and then took my dv6000 apart to clean the fan out. When i put everything back together it now only turns on for like 2-3 sec, sometimes see the hp sign on screen and it powers down right away did i forge to do something or maybe break a wire?
Ive the pavilion dv6000 and I cant switch it on. Can someone help me if is the video problem or the mother board is gone?? When I press the power button all it do is the led are on for second and thats it. HELP!!!!
Do you sell parts off of old Dv6000 HP mother boards. I live in the USA and it would cost me a bundle to ship my laptop to you and get it back. I need the clip and bracket that holds the cable to the mother board from the key board. Mine has came unsoldered from the heat and broke.
I just did a parts swap between two of my HP laptops.
Does anyone know if the graphics card can be removed? From what I could see, it was completely integrated (glued down with no screws for removal). I'm having to use an older motherboard with a slightly messed up sound card just so that I can reap the benefits of the better graphics card. If I could only remove the graphics card and put it on the newer motherboard, I'd be set...
That is some good shit! Put back faster than what it would have taken me, even if you did speed it up. Anyways, yes people, unfortunately hps are NOTORIOUS for MoBo failures :(
Thank so much!!!!!!! I took mine apart waiting for my new MOBO, and this is the video i need to put it back together. Since it will be a week until I put it back together, I'll probably forget how to! You did wonders!!! BTW -- HP sucks, this is my 3rd motherboard, the other two were covered on warranty, this one I have to buy, because now my warranty is over.
Thank so much!!!!!!! I took mine apart waiting for my new MOBO, and this is the video i need to put it back together. Since it will be a week until I put it back together, I'll probably forget how to! You did wonders!!! BTW -- HP sucks, this is my 3rd motherboard, the other two were covered on warranty, this one I have to buy, because now my warranty is over.
i'm kinda screws, since i bought my hp6000 in canada and i'm currently in croatia, and guess what? it overheats as hell!!!
now it's almost dead, i have to struggle with lagging (even this video lags!!) when i open anything! and it started to show some hard disk failures..... i don't think they will replace the motherboard 4 free, so i can start asking around
HOW much does new MB cost?
(also, can i buy one that is compatible with better proc and graphic card?)
I can't find any recalls regarding to this problem. Just some stupid battery recall, like that's gonna change anything. I can use my laptop without battery, it still lags as hell. One thing is for sure I will never ever buy anything from HP, not even that surface for mice they have.
hi...what is the problems with like it's won't turn on..just sometime..or sometime like power on or off but it's won't on..but sometime like i keep power on and it's turn on by itself...hard to explain...i mean like sometime i turn it on..i won't on...and the power can on and off on and off...like that..i need ur help..thx..bros..!!
I have two hp dv9000, they can turn on, but nothing show on the screen, called hp support, they have HP Limited Warranty Service Enhancement, but track is those 24 months count with you just buy, if you have one year warranty, you only get 12 months extend, HP know this is video chip problem, but they do not recall their products, after two years have all kind video problem come up!!!! HP don't care their customers!!!
i have a problem with my Hp dv6000 cam...when i want to use it, my computer tells me to plug it in, the computer tells me that i don't have any web camera...i want to know why my computer doesn't recognize the camera if it is built in my computer....can you help me??
Its really not that bad, esp. if you have the tech manual for the laptop (it describes how to take apart and reassemble every component of the laptop, they are easy to obtain for most laptops), take note of every action you take, use basic common sense, and be careful and you can make most repairs to a laptop yourself.
yes i called hp to see what they say...and omg they said that its my motherboard since im not getting anything...so what do you think? is it the motherboard
hp have very big problem with the dv6000 mainboards! just google it and find 1000 others with the same problems. dv6000 and dv9000 mainboards have a constructing failed. they overheat!
i dont know what to replace...can you tell me so i can buy it from you....the problem with my laptop is that it starts everything lights on with in 1second it turns off nothing comes on the screen
@sparepartworld that's amazing , nice job . i saw when you plug the wifi card , i have the same on i thing (intel 3945abg) , the thing is (can i change it for another one ??)
@adnanosmani yeah ive dv6 2056el and ive same problem...i sent it to hp and they said "problem not found"...and ive another problem...sometime it find 2gb of ram instead 4gb!!!why??:(
felicidades es una buena tecnica, claro eso asi se hace, y buena calidad de video. bueno para el que tiene el conocimiento basico es mas sencillo. gracias.
I think thats a bad mainboard, too. HP have very big problems with this boards! and now they don't produce tehm any more. So there are not many working mainboards. the most are damagaed!
Hi, nice video, one question... I have a problem when I power up my laptop, the fan over the processor starts turning, the power LED is on but there is no signal to the monitor or any reaction from the processor... I replaced the motherboard, same problem. Does anyone know how to solve this problem, is it the processor or something?
The most likely scenario is the board you installed is bad as well. It was probably a used/refurbished board, that worked for a few days then died before it got to you. This is a common problem with HP boards.
I think thats a bad mainboard, too. HP have very big problems with this boards! and now they don't produce tehm any more. So there are not many working mainboards. the most are damagaed!
You need to replace the entire motherboard because the video card in this notebook and many others are build in. And because of that you can't upgrade the video card. On many of these HP notebooks the graphics card dies very quickly, it happed on mine too :(.
Very good video. I would be of great help if you could show how the keyboard cable is plugged in. I had to search another site to find out about the sliding lock. Very good video though. Took me about 2 hours to replace the board and this was the first time I have every replaced a laptop mother board. Thanks Scott
whats the name of this song?
savvas929 3 weeks ago
Can i get the black piece that the hard drive backs into? Its actually on the board. I have the board out.
roosterwes 2 months ago
HEY I Have a HP Pavillion-DV 6000 With Intel Core i-3 370m but how can i detect my Motherboard without ripping my laptop apart please answer back.......
rohan1067 6 months ago
I got 3 min into this and just had to move to another tutorial. The music is not helping. I can turn it down but I keep thinking he gonna say something I'll miss. Yeah I can rewind and restart it. Ah Nevermind
BadRonald1 7 months ago
whats the other chip below the fan that has another arm going to it? its bigger than the GPU but i dont have it on mine D:
firebomber39 7 months ago
While the tears poured onto HP laptop!!!!!!!
Kiisu845 7 months ago
küll võib pisaraid valada hp peale
Kiisu845 7 months ago
@Kiisu845 sorry, englisch please!
sparepartworld 7 months ago
I have a Dv6 with Intel core 2 T6600 duo and chipset PM45, Southbridge Model 82801IM (ICH9-M). Motherboard quanta 3628. I need to know the model of PLL! :)
MD80phreak 8 months ago
@MD80phreak can you send the P/N from the button or the S/N, then we can find it out.
sparepartworld 8 months ago
@sparepartworld mainboard s/n is CNF9396XV3
MD80phreak 8 months ago
is it possible to exchange ram or graphic card cards from my dv6-2150 hp laptop to my compaq destop ?
jayycarter6 8 months ago
thanks man... i'm learning about computers and you help me a lot... thanks again
morenopinett 9 months ago
ok the cooler is covering two chips the processor and the other chip what is ti?? my computer only has one arm and is for the processor i would like to know what is the other chip your cooler is covering??
morenopinett 9 months ago
@morenopinett the cooler cover the CPU = processor, the GPU = graphics and the chip set
in some models the GPU is in the chip set integrated
sparepartworld 9 months ago
what is the other part that you are unscrewing with the processor??? not the fan but the other ship???
morenopinett 9 months ago
@morenopinett the cooler for the GPU? sorry i don't know what you mean, at witch time in the video is it?
sparepartworld 9 months ago
I have an asus ul30a but i want to have a better vid card n processor..im thinking of buying the motherboard of ul30jt so that it can support da vid card n processor..is it worth doing that or should i buy the entire laptop..?
videodreko 10 months ago
1:26 nice piece of cake !!!! slup!!
mccluftwaffe 10 months ago
Shoud I buy an specific processor to Hp Dv-6? or any processor I like this: Intel Pentium 4 3.8GHz 800MHz 1MB Socket 775 CPU is it 3.8 Ghz or 800 mhz?
HKS134 10 months ago
Precision Division specializes in circuit-level laptop motherboard repair. Repairs are performed at a computer controlled dark infrared rework station and monitored by continuous ESD event detection by 3M.
To learn more, go to PrecisionDivision . com
precisiondivisionfla 10 months ago
can someone help?
I want to replace my HP Pavillion Dv6000 processer and i want to know if it is possible? if it is can someone show me a cheap website where i can buy a new one?:)
tari0048 10 months ago
this is cool but i would love to replace my cpu with a better one for sure loool
BREEZAR428 10 months ago
Try a copper shim and lower your gpu temps. Only $5 and comes with thermal paste. Search for "dv6000 copper shim" on ebay.
chips2481 10 months ago
like the music. :-)
Leon112006 10 months ago
hey i have a hp pavilion dv6 is it posible to change the video card to something newer? please reply
aless141 11 months ago
@aless141 no, that isn't possible! sorry. the gpu is on-board
sparepartworld 11 months ago
@sparepartworld i also have a hp pavillion dv6 and i was wondering if i can upgrade the processor and graphics card is that possible?
BromanceProductionsz 10 months ago
YOU FORGOT A TOUCHPAD :)
fischeralan 11 months ago
Can someone help me with something? I have a problem with my hp laptop. Whenever I turned it on there's a loud scratching noise like the fan is broken or it's hitting something. How would I fix it? Do I need to change the fan or is it just useless to fix it?
RBLXBurntoast78 11 months ago
@RBLXBurntoast78 how old is the laptop? do you ever have cleaned the fan from dust?
sparepartworld 11 months ago
@sparepartworld Only like 2 years old and no I haven't. Also the laptop is a HP Pavilion Entertainment
RBLXBurntoast78 11 months ago
Very impressive sir i have just started working on laptops and i seldom get done in 10 min very good
elgoneimy 11 months ago
everything works but the cd drive. When I press the button to open it doesn't work. What have i done wrong? or what can I do?
ElProfeUruguayo 11 months ago
This has been flagged as spam show
Try a copper shim and lower you gpu temperature. It is a perfect fit and only $5. Comes with thermal paste. Search for "dv6000 copper shim" on ebay.
chips2481 1 year ago
SECURE a lan card OUT? Okay that's pretty weird.
FRURMELLL 1 year ago
Great stuff. Thanks a lot for the video. I just replace my motherboard that I had a no vga signal to monitor.all works great now.
just to let you know guys I got my motherboard from HK took a few weeks to arrive but works great.. HP6000 laptop
miles2home 1 year ago
i got a question hope your able to answer my question ^^. The part of the laptop where the charger goes, what its called? and can i fix it? its a bit melted bit worried that something might happen to my laptop.
sphiedd 1 year ago
im not going to lie i was looking for this video but now i just watch it for the music
rulermon 1 year ago
Are there any guides of how I can remove my Graphics card + CPU on my HP Pavilion DV6? I got a ATI Radeon HD 4350 and AMD Athlon II-Dual Core M320 2.1 GHZ
mymichellegunsnroses 1 year ago
i want a piece of that CAKE!!!
slash3901 1 year ago
Bravo
katsu2300 1 year ago
Hey do you know your cpu pll, seems we have same cpu-s
Maffia1234 1 year ago
Wanted!
Your old HP DV2000 DV6000 or DV9000 motherboard. Board must be in good physical condition with no signs of tampering.
Precision Division repairs laptop motherboards for computer repair shops and home users, and we want your old boards!
Go to PrecisionDivision . com to learn more
geeksarenotcool 1 year ago
I want to replace the motherboard in my laptop of the same kind in this video, but I am afraid that the new motherboard will have some variances that will not fit or work in my current laptop. Is there anything I can do to insure I get the correct motherboard the first time?
GinoGraziano 1 year ago
"screw the mainboard" :D
JasonTruong1 1 year ago
Crappy music. You should be explaining to people what you're doing. Or did you think they'd just rather hear music instead of actual help?
completebastard 1 year ago
Install a copper shim to lower your gpu temps 15%. Only $5 and comes with thermal paste free. Search for "DV6000 Copper Shim" on ebay.
trad209 1 year ago
sorry, I ment on the left. Long day. Mmmmmm banoffee pie!
paulsu27 1 year ago
Is that a peice of banoffee pie you have sat there oin the right? Are you gonna eat that as a reward for fixing the laptop? Lol.
paulsu27 1 year ago
You're a pro! I spilled coffee on my old Compaq Evo N1000v which rendered it powerless. What do you think are the parts that were damaged or affected by the spillage. Thanks for your help.
starfire787 1 year ago
good video, i need with my dv6000 i m running it on windows 7 and i have a battery error " consider replacing your battery" and i replaced the battery and still the same error. can u please help me thank you
ujash2003 1 year ago
Try my copper shim to greatly lower your gpu temps. It is a perfect fit and only $5. Search for DV6000 Copper Shim on ebay. Also comes with thermal paste free.
chips2481 1 year ago
Great video! Helped me big time, thanks again!
catman12121212 1 year ago
This has been flagged as spam show
Try my copper shim instead of the stock thermal pad to greatly lower gpu temps. It is a perfect fit and only $5. Comes with thermal paste free. Search for "dv6000 copper shim on ebay".
chips2481 1 year ago
This has been flagged as spam show
Are you like many that have problems with a constant PC crash every time you turn your computer on?Well if that's your case check out the link in my profile
KellyMHorn 1 year ago
this is a waste of time, there is a manufacturing defect in these boards.
you are just replacing a bad board with another defective board.
Astroman89 1 year ago
@Astroman89 That is too true. I fucking had HP replace my wireless card for free, and then as soon as the warranty was up, it went bad again( because they replaced it with more shitty stuff).
gridsinister 1 year ago
@gridsinister If you had this model or a similar one, chances are your wireless didn't actually go bad. This board has a defect in it, one of the symptoms is the wireless stops working..it's not the card, but actually the board, the only temporary fix is to get a USB wireless adapter until the laptop stops working all together, the other symptoms include the screen not coming on, not turning on at all, or only turning on sometimes.
Astroman89 1 year ago
What a waste, nice job showing how to get at the motherboard by taking the laptop a part. Epic fail...
Nezello 1 year ago
This really helped me change out the motherboard in my DV6000. Thank-you for posting! I just wish I could remember what color screw went where.
clockguy2 1 year ago
i also have a dv6000, and it crashed 3 or 4 times today...and it's because of NVIDIA Graphic Driver problem...can it still be fixed?
Kyuu17 1 year ago
hey i really need ur help right now, the other day my house pwer went down and i was at work, and i didn't unplug my laptop, so that basiclly mess up my mother boad of my dv7 1245dx i don't know should i do and i don't have enough money to buy a new laptop, do you have any suggestion, please i reallly need your help
tobyhang100 1 year ago
This has been flagged as spam show
@Naill777: This Song is "Phunk Foundation - Good Vibration (Long Silver Star Remix)
Its a amazing Song i love it ;)
Staniero 1 year ago
nice video but is there any need for the awful awful awful awful awful music??
niall777 1 year ago
How can you repair this notebook while there is such a nice piece of cake right on your left side? o.0 ^^
Sombralion 1 year ago
why the awful music?
niall777 1 year ago
Quiero desarmar mi Laptop DV6 1110Es pero no se si puedes publicar como se desarma. :D
GuzmanDiaz18 1 year ago
screw everything :))
horsycos88 1 year ago
im not gonna do this.... too hard :D and i have an hp laptop dv 8 ! but i want to upgrade ram to 8 gb ! is it at the back of my laptop ? i have 18.4 inch screen
Thumbs up for video)))
Talanov98765 1 year ago
Nice! I have opened my laptop a couple of times for cleaning dust purposes, but this looks great.
32JSE 1 year ago
is their any way i could replace graphics card of my hp pav Dv6000 with an nvida one its really slow
iTechNetwork 1 year ago
Repair laptop exclusive HD videos for more info visit laptop repair via the link through w w w .buckmansproducts.webs.com
TomBuckers 1 year ago
seen how fast he's working he must be desperate to eat that slice of cake on the side
i have a plan for my HP in includes lighter fluid, a drill, a hammer, a bbq, matches, 8 cans lager and a sniper rifel
bscarsvideos 1 year ago
Hey thanks very much for the video! I've used it twice now to disassembly (and most importantly, reassembly) my laptop just to unblock the fan vents and stop GPU & CPU overheating. Would have been impossible without this excellent video.
Is there an easier way to clear out all the dust (rather than taking the whole computer apart) and or stop the dust from getting in there in the first place?
Thanks.
nightmarestorm 1 year ago
Not really professinell.
Forget anti static belt and heat sink paste. Seen in all his videos. Not a good service.
And most new notebooks don't have a CMOS battery, its a capacitor now.
Burkhardj 1 year ago
@Burkhardj I see a anti-static mat...
task514 1 year ago
@task514 shure, but no belt.. The mat alone does'nt work. Person charged = current flow and with the mat you have a perfect CMOS / FET killer
Burkhardj 1 year ago
@Burkhardj you don't have a idea, how many notebooks we repair daily... so just let this unprofessional coments. Thanks
sparepartworld 1 year ago
@sparepartworld last time i tried this i blew up the motherboard.... now i 'm having problem with the dvd it plays when it feels like it, now it just running but wont play i restored the laptop but still wont play anything just keep running now i'm thinking of open it and take a look at the cable but i'm worried not to know how to put it back in again. it's the same model, any advice??
thelastplanet 1 year ago
Comment removed
Civic9390 1 year ago
This has been flagged as spam show
@Burkhardj The mat is the best was to protect against ESD not to mention it doesn't look like he is doing it in a house which means no carpet to make easy static. You sir maybe should go back to hardware basics and read this book: ISBN-13: 978-1-4354-9778-8 Anyways, Carry on...
Civic9390 1 year ago
@sparepartworld EXACTLY!
I am NO pro but i prefer to try and fix these computers before i give up on them
irulethe70s 1 year ago
@Burkhardj the hell?
Strafespar 1 year ago
@Burkhardj profesionals don't need anti static belt, we have such easyer tricks. And we don't forget the thermal paste, there are thermal pads. We repair damaged notebooks, and the most notebooks, which are become damaged, are not new...
sparepartworld 1 year ago 10
@sparepartworld This guys spelling tells you not to let him touch anything of yours. Lol!
gridsinister 1 year ago
@Burkhardj
I've repaired tons of computers, I've never needed anti-static belts. You ground yourself before working to stop discharge. Thermal Paste is really n/a either, if you're working on a Notebook, you use Thermal Pads. Believe me, you DONT want thermal paste on a motherboard.
TimLenhartTech 1 year ago
@Burkhardj the heatsink on most hp laptops have a shield instead of paste
rockgod4 1 year ago
@Burkhardj
Don't need antistatic belt (what are you from the 70s?), there are much easier methods of 'discharging' oneself
There is a thermal pad, removing it would be laborious, time consuming, and ultimately pointless, thats why its a thermal pad, it doesn;t need replacing (most often)
How often do you repair 'new notebooks' ... ? lol
mdma4life 1 year ago
@Burkhardj Becides, I never discharge when i work on computers or use wriststraps
Ask my comtech teacher,he says its a waste and 1 in 100 computers fry from no discharge
I think its 1 in 9000
irulethe70s 1 year ago 3
@irulethe70s it sure would suck if your computer were the 1 in 100
lucilor 1 year ago
@lucilor Never had a probloem
irulethe70s 1 year ago
Hallo, ein echt gelungenes Video... =)
Ich habe auch ein HP DV6733eg und bin unzufrieden, mein Laptop geht bei überhitzung immer aus nun tausch ich das Mainboard aus und hoffe das es funktioniert.
Shortplaya001 1 year ago
Comment removed
darklink701 1 year ago
Hey, I have a Pavillion dv6449us. It is all I have to use for gaming. I want to replace my video card with something newer. Would that be possible? I cannot find any disassembly manuals on the internet.
darklink701 1 year ago
@darklink701 no, that isn't possible! sorry. the gpu is on-board
sparepartworld 1 year ago
You can learn how to fix a laptop here bit[dot]ly[slash]aXeNEr
txtravel1 1 year ago
This music is AWFUL.
Arkhilhra 1 year ago
This has been flagged as spam show
i have a question. i saw a laptop with a core duo ultra 2.5 ghz(amd) and there was 6gbs of ram. is all the ram even going to be used when the cpu usage is maxed out, since the ghz isn't even that high?
wtfiyn 1 year ago
Thermal paste and no obstructions to the fan ports are the way to go. I set mine bottom side up when I leave it.
clockguy2 1 year ago
wtf why do u have a piece of cake on the table? :D
lauris15151 1 year ago
no offense, but change is waste of money.... after few months nvidia graphics chip will fry up goz the cooling system is fail.
DjHappyC 1 year ago
thanks for your video.
nkruma 1 year ago
This is a group for anyone who has faced problems with hp products specialy laptops. One defect of the Hp pavilion laptops ( DV 2000, 6000, 9000) is the motherboard problem and VGA ( graphics card ). Perhaps together we can bring this aware to HP.
facebook /group ( .php )?gid=110390745653221
OR look for : let's say no for HP products - لنقل معا لا لمنتجات اتش بي
ahmedjad2 1 year ago
yes you must apply thermal paste between the gpu,cpu cooling conductive systems otherwise the computer fail to work sooner or later
gfenesx 1 year ago
yes you must apply thermal paste between the gpu,cpu cooling conductive systems otherwise the computer fail to work sooner or later
gfenesx 1 year ago
did you use thermal compound between d cpu, video chip, b4 you put d heat sink???
if you do! do you need to heat up the video chip for it work properly or you can just put it on n it will work! i need to know this anyone plz?? thanks
MC149403 1 year ago
Can a motherboard make a your lap tap not work
setnommee 1 year ago
I need some help, i accidentally, while cleanin it, pop out the esc key, the keyboard is fine, just the esc key is now in my hand, am i try to put it again, but im afraid that i can't. I dont broke anithing, bya miracle, hehehe, and the esc key (or where it used to be) works fine. Anyone that can kindly help me, with a video or a pic tutorial, you know, because this lap is of my boss, and i think he can get really mad if he see teh computer one of these days.
KudaFox 1 year ago
you don't do anything to the factory installed pcm pads on the gpu or cpu, or replace the heat conductive pad on the northbridge with copper, as some suggest. so how reliable is the replaced board in the long run? no issues due to bad cooling?
zer0zilli0n 1 year ago
Hey, I have dv6000 laptop and when i turn it on, it turns on, then shuts off, then keeps repeating itself until I turn it off manually. My motherboard has went out several times before, and I have got it replaced by HP, so i bought a motherboard, and just installed it. When i put everything back together, it did the same exact thing.. It would turn on, and turn off, over and over again. Got any idea what else it could be, besides my mobo?
PrinceOfTheElite 1 year ago
@PrinceOfTheElite I've taken the RAM out, started it, and it just keeps restarting, I've taken the harddrive out, and the same thing also, just keeps restarting over and over.... Any other ideas?
PrinceOfTheElite 1 year ago
Awesome video!! i have a question though. i watched your video many times and then took my dv6000 apart to clean the fan out. When i put everything back together it now only turns on for like 2-3 sec, sometimes see the hp sign on screen and it powers down right away did i forge to do something or maybe break a wire?
adamrberg 1 year ago
Exactly the vidoe I was looking for
Thanks
wij300 1 year ago
just by the way.. the song used in this is using the melody of the classic 2001 track "Dance Nation - Sunshine" ...
i KNEW i heard that melody before.. :D
Knaeckebrotsaege 1 year ago
Ive the pavilion dv6000 and I cant switch it on. Can someone help me if is the video problem or the mother board is gone?? When I press the power button all it do is the led are on for second and thats it. HELP!!!!
DGL77AS 1 year ago
Those HP DV6000 are complete garbage.
I will never buy HP again.
qopha 1 year ago
Do you sell parts off of old Dv6000 HP mother boards. I live in the USA and it would cost me a bundle to ship my laptop to you and get it back. I need the clip and bracket that holds the cable to the mother board from the key board. Mine has came unsoldered from the heat and broke.
capman911 1 year ago
I just did a parts swap between two of my HP laptops.
Does anyone know if the graphics card can be removed? From what I could see, it was completely integrated (glued down with no screws for removal). I'm having to use an older motherboard with a slightly messed up sound card just so that I can reap the benefits of the better graphics card. If I could only remove the graphics card and put it on the newer motherboard, I'd be set...
poshko41 1 year ago
That is some good shit! Put back faster than what it would have taken me, even if you did speed it up. Anyways, yes people, unfortunately hps are NOTORIOUS for MoBo failures :(
SOLOxTRiPLe 1 year ago
how was your pie? :D
assassin74 1 year ago
This has been flagged as spam show
Thank so much!!!!!!! I took mine apart waiting for my new MOBO, and this is the video i need to put it back together. Since it will be a week until I put it back together, I'll probably forget how to! You did wonders!!! BTW -- HP sucks, this is my 3rd motherboard, the other two were covered on warranty, this one I have to buy, because now my warranty is over.
PrinceOfTheElite 1 year ago
Thank so much!!!!!!! I took mine apart waiting for my new MOBO, and this is the video i need to put it back together. Since it will be a week until I put it back together, I'll probably forget how to! You did wonders!!! BTW -- HP sucks, this is my 3rd motherboard, the other two were covered on warranty, this one I have to buy, because now my warranty is over.
PrinceOfTheElite 1 year ago
Nice Jop! I have a dv5, is thiss th same board????
It overhead! thx
74pbg 1 year ago
Try my copper shim instead of a penny and keep the temperature it's lowest. Search for TX1000 copper shim on ebay. Thermal paste is included free.
chips2481 2 years ago
lmfaoo i love how theres a piece of cake sitting right next to you xD
randomxashunn 2 years ago
@randomxashunn Duh how else is he going to get rewarded?
plankydude 2 years ago
what about zd 7000 with their Black Screen Of Death...
i wish i even knew where the video card was
girrrrrrr2 2 years ago
man i'm glad i found this
i'm kinda screws, since i bought my hp6000 in canada and i'm currently in croatia, and guess what? it overheats as hell!!!
now it's almost dead, i have to struggle with lagging (even this video lags!!) when i open anything! and it started to show some hard disk failures..... i don't think they will replace the motherboard 4 free, so i can start asking around
HOW much does new MB cost?
(also, can i buy one that is compatible with better proc and graphic card?)
losebiramnickove 2 years ago
Have you checked the HP website? There was a recall on some of these- and it was because of the motherboard. Check it out.
brt929 2 years ago
I can't find any recalls regarding to this problem. Just some stupid battery recall, like that's gonna change anything. I can use my laptop without battery, it still lags as hell. One thing is for sure I will never ever buy anything from HP, not even that surface for mice they have.
losebiramnickove 2 years ago
@losebiramnickove dont even think of going mac...your just wasting money...buy an asus or something...those are pretty good...
planefreak3 2 years ago
hi...what is the problems with like it's won't turn on..just sometime..or sometime like power on or off but it's won't on..but sometime like i keep power on and it's turn on by itself...hard to explain...i mean like sometime i turn it on..i won't on...and the power can on and off on and off...like that..i need ur help..thx..bros..!!
povx09262005 2 years ago
This has been flagged as spam show
I have two hp dv9000, they can turn on, but nothing show on the screen, called hp support, they have HP Limited Warranty Service Enhancement, but track is those 24 months count with you just buy, if you have one year warranty, you only get 12 months extend, HP know this is video chip problem, but they do not recall their products, after two years have all kind video problem come up!!!! HP don't care their customers!!!
chenjq88 2 years ago
i have a problem with my Hp dv6000 cam...when i want to use it, my computer tells me to plug it in, the computer tells me that i don't have any web camera...i want to know why my computer doesn't recognize the camera if it is built in my computer....can you help me??
GeNgaRtiC 2 years ago
@GeNgaRtiC that is most likely a driver issue. go to the HP site and look for the dv6000 cam driver for your os.
KingOfSand100 2 years ago
lol you make that shit look easy :P
BlakeKawalec 2 years ago 4
@BlakeKawalec
Its really not that bad, esp. if you have the tech manual for the laptop (it describes how to take apart and reassemble every component of the laptop, they are easy to obtain for most laptops), take note of every action you take, use basic common sense, and be careful and you can make most repairs to a laptop yourself.
mdma4life 1 year ago
my problem is that can have does motherboard or way can order from you or at hp company?but any thank for the info......
vXTom0yoXv 2 years ago
it seems like everything is working fine now after replaceing my motherboard and now i have a black screen, nothing is showing on my screen
adnanosmani 2 years ago
i just changed my motherboard and now my dispaly is black screen nothing comes on my display, how do i fix that
adnanosmani 2 years ago
yes i called hp to see what they say...and omg they said that its my motherboard since im not getting anything...so what do you think? is it the motherboard
adnanosmani 2 years ago
hp have very big problem with the dv6000 mainboards! just google it and find 1000 others with the same problems. dv6000 and dv9000 mainboards have a constructing failed. they overheat!
sparepartworld 2 years ago
thanks
adnanosmani 2 years ago
can you tell me what to do now? my warranty is out, my hp dv6000 is kinda dying......
losebiramnickove 2 years ago
ikr, same thing is happening to me, have already had it repaired TWICE, it's really not worth the effort...
mrwireful10000 2 years ago
@sparepartworld
my not ^^
Xanardur 1 year ago
i dont know what to replace...can you tell me so i can buy it from you....the problem with my laptop is that it starts everything lights on with in 1second it turns off nothing comes on the screen
adnanosmani 2 years ago
the mainboard. the fact is, we don't sell the mainboards or displays, we only change it in our work station.
sparepartworld 2 years ago
@sparepartworld that's amazing , nice job . i saw when you plug the wifi card , i have the same on i thing (intel 3945abg) , the thing is (can i change it for another one ??)
youssefqazwsx 1 year ago
@adnanosmani yeah ive dv6 2056el and ive same problem...i sent it to hp and they said "problem not found"...and ive another problem...sometime it find 2gb of ram instead 4gb!!!why??:(
vio90vnp 1 year ago
Your good!
TiberiusII 2 years ago
screw the mainboard......word choice fail! lol
TheHandzShow 2 years ago
everyone know what is meened
sparepartworld 2 years ago
can you show me wireless lan cables replacement
phindele 2 years ago
phindele you again... i have answered you late, but i have. :-)
sparepartworld 2 years ago
Great video!!
811prime 2 years ago 2
You forgot to put termal cpu past on you cpu dumbass xD
ultragaming1993 2 years ago
i really don't wanna answer this a 10th time... but i do:
by this modell there is a mix between thermal-pads and thermal paste on the heatsink. So no thermal past needed!
(loving CRTL+C and CRTL+V)
sparepartworld 2 years ago
felicidades es una buena tecnica, claro eso asi se hace, y buena calidad de video. bueno para el que tiene el conocimiento basico es mas sencillo. gracias.
redencion2000 2 years ago
I have the same problem as qrshlus, and also changed MB and problem persists. Where else can the problem be. HELP!
DanielHode 2 years ago
I think thats a bad mainboard, too. HP have very big problems with this boards! and now they don't produce tehm any more. So there are not many working mainboards. the most are damagaed!
sparepartworld 2 years ago
Hi, nice video, one question... I have a problem when I power up my laptop, the fan over the processor starts turning, the power LED is on but there is no signal to the monitor or any reaction from the processor... I replaced the motherboard, same problem. Does anyone know how to solve this problem, is it the processor or something?
qrshlus 2 years ago
The most likely scenario is the board you installed is bad as well. It was probably a used/refurbished board, that worked for a few days then died before it got to you. This is a common problem with HP boards.
valkiris 2 years ago 2
I think thats a bad mainboard, too. HP have very big problems with this boards! and now they don't produce tehm any more. So there are not many working mainboards. the most are damagaed!
sparepartworld 2 years ago
I may have to to just this procedure.
I responded with a video. machine won't power up, power LED around the power plug pulsates.
justinaurelius 2 years ago
do it some "peep" sounds when power on?
sparepartworld 2 years ago
Cool, I'm too scared to do that to my own laptop but I'll do it when I really need to do it. Thanks for the vid
jdiaz813 2 years ago
can you change the video card on this computer?
emace3 2 years ago
You need to replace the entire motherboard because the video card in this notebook and many others are build in. And because of that you can't upgrade the video card. On many of these HP notebooks the graphics card dies very quickly, it happed on mine too :(.
Joh739 2 years ago 2
Joh739 said it. it isn't possible!
sparepartworld 2 years ago
Very good video. I would be of great help if you could show how the keyboard cable is plugged in. I had to search another site to find out about the sliding lock. Very good video though. Took me about 2 hours to replace the board and this was the first time I have every replaced a laptop mother board. Thanks Scott