Windmill Help

[mRhUgGeR95]

Can you watch my vids and help me with my windmills LOL but seriously watch my vids :D

[dylanchickmagnet15]

i dont think you need help

[jahmmal18]

try to re-stab in lesser angle. you are re-stabbing in 90 degrees angle try 45 and lean forward and work with your legs. then try just forearms ;)

[jillgab03]

you dont need help on your windmill,in fact your the one who needs to help me with my windmill,nice

[parduek987]

U don't need help idiot

[justacrazyguylikeme]

you have to leave your head on the ground. but they are good ;)

[Andalver123]

you already got clean windmills bro :)

[markovsembel]

Actually that's right. But you collide too hard to d ground.

[MadeBySex]

help my mills pls watch?v=npxf6y0-2SA

[wow69lol]

they look great? better than mine at least

[taikhoang9x]

quiet good!!

[etapa2nd]

i think you need to star practicing windmill without stab XD

[Tyrannobenji101]

you need to kick

[RoseMetalKSE]

You know what's wrong? After the first leg spin, you collide too hard with the ground. Try not to take your right hand off the ground so sudden, but let the hand easily go down by spinning your palm along with your hand 90 degrees so it goes on the floor nice and smooth.

[chay100372]

What's wrong with your windmills is that they're fkin flawless!!!!

[69BrianXD]

dude.. you need to grab your ankles..

[capster111]

Help? that was nice... though you did a slight jump into each one but nice :D

[darlan453]

windmill é facil gente ve eu fazendo ai..comentem.

watch?v=JQYIIW1NIeA

[SarmisSimras]

Practice, when you are on your back Fucking kick your legs in air!!!

[ojoreakatheoj]

Kick legs instead of focusing on arms

[rjpada]

i know 1 problem that you have.... that is do it like pharush

[FlascoVEVO]

Your Stabbing Way To Hard Try FormArms And Then Thell Get Nice

[timtamtazza]

how long did it take you to learn it?

[Klauserable]

I need your help man Lol!

[mellowcubed]

Try puting your--no, lift your le--no, kick hard-no, no you seem to be doing them alright

[xCienNV]

Looks like your trying to go from mill to flare, if you're asking for help as in need of more speed, just roll which is harder to and requires more leg motion which increases you spinning motion.

[AeriaIistic]

like a heartbeat

[OtakuAgency]

You collapse too early, try waiting a bit longer.

[iPianoAzn]

@OtakuAgency it's not because he is collapsing too early, its cause he isnt collapsing fast enough, which causes him to stall in that hand glide position. i know because i have the same problem. this is old, so im pretty sure he has mills down by now.

[bboysupafly1]

For anyone that have at least have two mills swing ur legs fast and when u go back into the handglide freeze push off like ur trying to push someone ur mad at and that should help u go faster

[Phr3shAznWalker]

i can do mine fine but i need help on the push of at the beginning does anyone have any tips?????

[killerzhea]

to make it fast.. just make sure swing ur legs fast and u nid control .make ur swing high

[Jandaoe]

K.. you have the 1st and the 2nd one down to get ur spin and power right... good! Now.. try tucking ur arms in to your chest and use ur forarms to spin you around bro.. Im telling you I had the same problem... DONT PLANT AFTER THE 1st one... just do your first roatation with the plant... then tuck your arms in to your chest and push off with ur forarms.. its 20 tims smoother and less work.

[Ovillalvazo24]

Dude your good! I can't even do 1!! Keep it up!

[BboyAngo]

youre awesome man u dont need help just keep practicing

[kennycruz8]

atleast ur windmill looks like one unlike mine....its pretty good jst a little more speed and ur good!!! keep it up

[kennycruz8]

atleast ur windmill looks like one unlike mine....its pretty good jst a little more speed and ur good!!! keep it up!

[bboybeelzmon]

ur collapse slowes u down

[nit0134]

i see the problem,yuhh need to learn halos now!!xD or munchmills lol

[g15zer0]

looks great...try to take more bold with your legs. then you're faster. later than you could try without hands. roll over your shoulder and your forehead. thats barrels ;)

[xTNgo]

the way you drop your stab is kinda odd. its like youre doing crickets at the same time, its probably will get cleaner if you try to leave youre elbow kinda together with ur body

[BboyDevice]

dude u do NOT need windmill help. lol

[SortaCoolWhiteNinjas]

You need to go faster and open your legs more if you wanna look really pro, do some middle splits and practice keeping your legs nice and wide- also use your head more and start barreling your arms if your ready

[BboyPandy]

only thing ur doing wrong is using ur hands LOL those are dope

[Dajo1413]

your windmills are pro you just need to go faster thats all mate :)

[dioseso]

emmmmmm. what you do wrong :S? 

[kenyoo123]

dude. ur windmills perfect. but the hand you jab in needs to go smoothly down, ur just hitting it and you can hear the smack noise.

[BreakBoyBrandon]

where did you get the mat?

[BreakBoyBrandon]

what the freak are you complaining for

9819381280912x better than me

[iAmAsianPinoy]

this is one modest mofo

[BboyLuckD]

thats how i do my windmills

[mrbboypaul]

you dont need help you are good!!

[bboyboomFnatic]

พับเเขน ให้เร็ว จบ!

[bboybacnis]

well i know youre alot better now but the only thing that can help the mills in this video are sweeping a LITTLE lower.

[bboyvietstylez]

better then mines

[Zomcrow]

u dont need help it looks beast

[xFailage]

Okay judging by your windmills in this video and the date it was posted.... you definitely need to help me.

[bboyjonha]

tus molinos son buenos,solo necesitas clavar menos tiempo en baby freeze asi conseguiras mayor velocidad y fluidez

[ScaryDude13]

lol u should help me!!!!!!

[bboycanine8]

if u can do like 10 mills u dont need any help u just have to make it a little more smoother

[BBoySnoOzi]

wtf u smoking... u dont need help lol all u need is stretch

[dcdreamerzcrew]

hey dats pretty good already....keep it up n try powerdrop after u perfect iht

[JeusDante]

this is just a random comment but i just got a nose bleed after watching your video...

idk if thats a compliment or a disrespectful comment... it just happened

[iVeryConfusion]

man u got windmills, i cant even get mills and its been 6 months?

[vinnienauta]

lol wtf! YOU're F@#KING GOOD!! LOl

[pabiox]

It's actually really good. If you want help try keeping your head on the floor.

[breakdancelifestyle1]

higher

[AznLove842]

lolz this was posted a while ago.....so u probably already learned this but after u restab, ur arm needs to collapse not fall xD lol

[MrBboyDinho]

Please help my windmills

watch?v=KGpxxzG6hPg

watch?v=KGpxxzG6hPg

watch?v=KGpxxzG6hPg

watch?v=KGpxxzG6hPg

[rockleetricker]

dude help on what yuor clean man move on to forearms=D

[Akatsuki1751]

u r good at them so dont complain

[savge10]

now you should focus on rolling instead of restabbing

[imasaint456]

yeah rite you need help dude your like awesome

[WRPROJECT]

You better than me, just try to improve your coll.apse

[KareemHawari]

well you should just learn forearms mills

[64GIO]

if u think u need help then i need jesus christ for a miracle...

[huber5962]

Don't take off your hand from the flor when leaving the turtle pose, let your spin pick it up, it will be smoother

[Bronskins]

that was very good.

[DriftxMills]

also turn your body when your going over to other side fast and hard!! (wat she said)

[DriftxMills]

also turn your body when your going over to other side fast and hard!! (wat she said)

[DriftxMills]

Tyr not to use your stabbing arm, instead to keep your selft up kick your kicking leg twards your face while the other one is at the opposite side of your body whipping as well.

[mrbboyjok]

yeah u need help in callapsing

[thetimmyboom]

Ayy can you guys help me on my windmills

Search on you tube thetimmyboom

Thanks for the help

[heen92]

dude them mills was sick . u dnt need any help. can u help me

[bboycottar13]

nice

[k2g2005]

nice floor dude im sooo jealous!!!

[BboyExcalibur]

ur collapse isn't really clean practice clean collpasing

[3ldenbay0t]

@BboyExcalibur look at the date before you respond hahaha. because i'm sure he got it OR he he quit. hopefully he didn't quit though

[jdxdavid23]

its ok kip practicing

[BboyHypeOwnz]

yeah man ur mills are pretty clean. only a few tips: like AceCr3w said..work on your collapse so its a continuous smooth glide. and i know what you mean by forearms. that comes once you get the smooth glide going. its not hard at all actually. watch my vid to see what i mean bout the clean collapse.

[ipohkengyeah]

ur mill is nice man. ur legs r wide. but i think for no hander or foreman, u nid more momentum n roll higher on back.

[jeffjeffjam]

not bad man !!!

[ProblemsChild4eva]

ur windmill is perfect , wat kinda help u need lol

[mandrakes64]

gooodddddddddddddddddddddddddd­ddddd

[RookieN08]

actually there is nothing wrong with your windmill

just need to work on your collaspe

your windmill is quite smooth and a lot better than me!

[AceCr3w]

it's ur collapse its not really a clean and smooth transition when you got a good collapse it will allow you to go faster and with no hands

[SpeedDemon2468]

umm

wtf is rong with ur mills anyway

[anthonyhviet]

ur windmills are nice and u r real lucky to have ur own room with a mat like that. i have to practice on carpet

[evilsenemy123]

Lol i have to to and i skinned my knee like 12 time already

[anthonyhviet]

ha who doesn't scratch up or bruise their knee?

i also bruise my hip alot too

[soccerbreaker6962]

@anthonyhviet ya same

it sucks

[Bboylimited]

there find get out :P

[idkguy517]

ouch kinda rough

[TomBreakdancer]

the only thing u have to do now is ur hand positioning ur hand is facing to ur left keep it straight and ur windmills will be 100% perfect trust

[Imbboychoji]

keeping ur head more low helps alot

[avivadgha1]

you r the last man on this wrold that need help in windmill

[fawkub]

good job ass hole

[VietCrew]

hey man, the foearm windmills arent really ment to be taught, becuz the hip movements and the momentum in everybody's legs are different, but i can give u one helpful tip, when i do anykind of windmills without restabbing especially forearm, you must have FIRM hips and legs, muscles must be concetrated to be stift and locked in place, i know that sounds confusing or complicated, but its true,makes sure yur left legs,reaches high into the air,it brings the hips up, keeps u from stopn on the chest

[biggnoobb]

bboy4lifeendless and rowell don't know what they're talking about. high stabs are good it means you can use your head = barrels

[BboyTek206]

itz pretty good...just keep practicing xD

[2koolz4u]

ur not suppose to jump on ur collapse but oh well, it works for u x]

[vesoblightwaver]

help lol haha ur rilly good :)

[BBoyRayEm]

Wow, that's already smooth xD

Can anyone look at my video and give me some tips too? Thanks

[Bboy4LifeEndless]

Your Stabing to high bro check out my vid

u gotta keep close to the ground always lean forward and dont go over your stab u can break ur risk

[RowellJavier]

you prolly got it by now cuz this was a few years ago... but if you wanna keep it going and faster try not stabbing that high, that makes you lose momentum. but its decent man

[Compassionless]

Your mills are fine just keep practicing so your comfortable with the motion once you are use your head for forearm mills.

[snatchycan]

hahaha bro u dnt need helpp

[camacho8875]

ur windmills are fine bro

[kisholy]

yo i need help with mine... i have problems on going from my palm to shoulders.... it hurts.. haha.. howd u do it?

[NEEDHELPBBOYING]

hey your mills are pretty nice. but all i suggest is work on your collapse becaue you can even hear that your going from yoru palm to your back you should go palm forearm tricep shoulder back. but otherwises dope.

[TheMegaPatrick]

Help???

i dont understand you

[cameraman56]

NICE

[Qurash]

my mill is similar to yours...now its important to learn how to do headmills...good for all variations...i have a hard time learning it because ur head always have to have contact with the ground

[funtae757]

dude your windmills are fine, should go to the other mill variations like barrel mill or something for faster mills

[wsxedc152]

man you really need help!you dont know the techniques you need to work another year till its can be call a windmill man your really sucks work harder mabey you get the first one LOL

[sayn1234]

wtf fuk nigga his windmill is better than yours

[wsxedc152]

you ass hole i was joking becouse he wants help and got perfect mills you got no humor sence bitch ass

[Bboyashiya]

btw ur a retard. that is all

[twobrokenarms]

i saw your vid shut up poser

[wsxedc152]

read what i wrote him and see how much your stupied bitch with 4 nipples

[BboyBamboo360]

wtf whats wrong with it lol

[klongo123]

Well, imo... Start using your head more

[WrestlingNFunny]

damn you dont need help. I'M the one who needs help haha. Like, I cant keep going. Its hard to restab higher.

[AFKs0ulJer]

i have windmill but the nutcrackers i can only do like 6 cause i don't noe how to pick up speed

[wsxedc152]

my problem in my windmill is the back spin plz help chek my page watch the video:"windmill help" and give me a tip to fix my windmill PLEAZ!!!!!

[wsxedc152]

your fine if you want ultimate mill just spin like crazy asshole that really fun!

[wsxedc152]

im sure its fun.........[:

[levent1000]

you are right m8 i guess you are now fare away and maybe you are beter on the windmill respect from holland

[onnu23]

man i would kill if i had a room like that to practice in i got beds tv tv etc in the way in my room : (

[FEEDMEPLOXORZ]

holy shit those are clean (for me at least)

[levent1000]

you have to work alot ... dude

[Inspired2Dance]

im guessing by now he has perfect mills. since those mills look good in 2007, i can only imagine how perfect his mills are in 2009

[mastemo]

your hand should be forward to your body, so you can colapse down, you do like throwing your self into it.

Hope you understand what I was trying to say, PS my english is not so good

[jeffersong808]

holycrap how do u go on ur shoulders

[jeepneyproduction]

i say your mills would be hella CLEANER if you learn to COLLAPSE better.

no shit,

your mills are tight.

keep up the good work.

-bboy sunset

[theheat808]

he's doing jumping mills. and yes they are tight haha

[bodmanscott]

collapse instead of jumping

[irule1697]

dude there basically perfect.the only thing u can do is make the collapse smoother.push off with ur stabed hand so u can fall down smoother and softer =]

but ur still beast =]

[bboyhama]

can you help me with my windmill please

[OMGitsMODAFAUKER]

Help with my windmill please. Vid on my channel.

[bodmanscott]

can some1 help me when im going to the second turn i lose momentum and stop before carrying on and can some1 give me a tip on how to keep my legs high at all times

[Itagaki32]

dude that's awesome all it needs is practice and that's keep up the good work

[jamesdabreakdancer]

try to keep ur legs as straight as possible and wen u get into the turtle position try to catch urself lower to the ground to get more speed

[cheeto15]

your mill is fine. you kick really high too. thats a plus

[andyisgay]

check out my forarm mills

[zinpango]

hm... dont smash your head on the flor?

[heykevinvo]

there good just work better on every collapse dont go down so hard

[Samakuo]

please how long it took u to learn this ?

[brownboy252]

collapse a bit softer ur like droping into every mill wich is slowing u down but still mor fluent than mine hmmmm....

[BBoyK0ng]

i have no idea if you still have those mills or if you have improved much more, but if ur mill still look like this, just collapse ealier and closer to your UPPER chest, so they dont see you going back into turtle freeze to go onto the next windmill, makes your mills sloppier, just ask me for more tips if needed

[BreakBoyAirBorn]

your windmills are great...

[crazyspart9]

you dont need help

i do!

im doin my swinging and collapsin right, but i just cant land bak to the hand glide position or turtle freeze position

[cpdpu]

EHHHH nice i wish i was able to do that:P

just perfectted flares:P

[vouzavez]

if you want your mills to look more cleaner than you have to learn forearm mills nohander mills

[worldleaderfelix]

they look nice but ur only problem is u need a diffrent mind set quit acting like ur doing pushups and than rolling on ur back and doing a 360 just spin faster