Syma R/C HELİ

[manorcraft64]

rubish

[gatorbait1971]

piece of crap

[IAmOpenMinded]

Funny to read all these negative comments from 2-3 years ago. It seems to me that the man demonstrating this model helicopter was quite successful in doing so, both in trimming, as well as flying it. I guess some people can't see the forest for the trees...huh? LOL!

[clifan8r]

whats the point of having 2 or 4 or even 4 channels when the helicopter dusnt change channels? i dont get it

[a100nick]

they realy need to stop selling the shitty 2ch helis

[MultiNAZIzombies]

thats a 2ch heli 3ch or 4ch are the best

[suarez658310991]

cuanto metros de maximo puede volar este helicopter

[MrSleepydemon]

trim it using the, L and R buttons under the right analog. hope this helps

[Songtester]

hey guys , iv got abit of trouble with my 603. i just bought it. i can stop it from spining, but how can i controll what way i want it to go? the instructions are not clear enuf. is it got to do with the wind? please respond.

[aerovolant]

use the trim buttons on the top of xmtr to stop the spin - after that its right thumb horizontally moved to control turn and vetically to control fore & aft (read the instructions a few more times)

[xStarryHaZex]

@Songtester on where the on/ off button is a litgtle circle tweak it in 1 direction and it should stop spinning

[mapukmapuk]

3:20 omfg wtf!

[gtokarsk]

Good control for a 2ch!!!

Nice! Did you modify anything, like changing it's center of gravity, so it would have tendency to fly forward?

[Fargrachim]

the song name is Kitaro-Sundance

[fuckaverageusers]

What is the name of the first song?

[edwin4759]

my first was almost the same and it really gave me nothing but frustration because the controls on the tail isn't as good as the micro ones. better get the 4 channel ones instead of this crap.

[AlienForcer]

i have the helicopter

[marser1965]

this is good for a beginers, 2 channels, no need more..

[conzo73]

nice heli i have one but u need to fly it higher it much better and whoever thinks these hleicopter are rubbish well JUST FUCKIN BURN!!!

[Bundi1968]

there shit i had one even with precise trim it just span in circles and didnt have good battery life ,i would not buy one again ,looks ok but looks in this case are decieving

[buffboybusy]

i got one today for christmas i think the could of made it 6 cannel but excellent stubility gdgd

[MTheoryStudios]

No cyclic control/2 channels/cheap battery = bad idea.

[MTheoryStudios]

*/non-proportional throttle

[ParaglidingManiac]

I have forgotten what si the charge time for it. Can anyone remind me pelase?

[gtryyyy]

syma is not a good quality helicopter its cheap if u want awesome rc copter then buy those 700 to 800 dollars in the internet

[ParaglidingManiac]

Fuck ya all! This heli is OK. You just need to be good enough flying it. And when people don't know it's 2 channel heli, they will think it's a 3 channel helicopter. You just need to learn when to push the wright stick to make it look cool

[quakermaas]

Pushing the rudder to the right , should make the heli turn clockwise, ITS NOT!!!!..OMG, they have what control there is back to front!!!

[JetsonTHC]

good!!!!!!!!!!!1

[senntennza]

only two channel this rc is too bad

don't sop that

[bratonabike]

wat kind of rc heli is this? looks like another crappy 2ch heli to me

[javlin100]

it is only 2 chanell cos he ses "2 kanal"

[ParaglidingManiac]

Can anyone translate please?

And is the helicopter shown on the video 2 or 3 channels?

[rcmaniac11]

its a 2 channel,very bad in my opinion

[ParaglidingManiac]

I've ordered this babe yesterday. Now gonna wait 3-4 weeks and take off!! Already have micro 3ch helicopter.

[jakeed090]

i have that exact one there krap

[Kococik]

This heli is good?

[turna2k6]

doubtful...its only 2 channel

[LukeSkyscraper]

No, trust me, I have one. Spend your money on a 3ch indoor heli for the same price and you'll have far more fun (3 channel micro mosquito). See the way it spins when climbing or descending? you can't stop that. There is no forward/back control either.

[psvision]

ya fuckyour69sister is right! why would anyone buy and fly such useless junks? made in China!!! HAHAHAHAHA! fools! tell me about it, I own a Trex 600 electric which is far more superior than your fuck China housefly! And I didn't pack it with plastics like some fools do!

[JaleelJohanson62]

Hey psvision..... try sticking your Trex 600 up your ass and seeing if it will still rotate. I'm betting you're a big enough asshole that it will. LOL

[laceratedS]

Therefore it's a hobby. why does it concern you cunt!

[fuckyour69sister]

i can't help but to comment! this poor chap who had been had (and didn't know about it)treat this lousy china made heli like a 500 bucks heli! first of all this crap can't fly! all it does is hover around, change direction abit and that's it! theres no servo controlling the rotor direction anyway! its not even meant for outdoor cos of that. pack it nicely? i'll trash it! by far the worst heli, only fools buy it. the co axial mosquitoe is better than this crap! and its much cheaper!

[alibubba3500]

its a remix of calabria 2007 by enur, natasja, and mims

[ChristyTV]

what's the name of the second song in this video? i love it!

[wiggleboy1]

i lost my charger for this if you can please tell me a webbie where i cna buy another i would realy appreciate it

please email me or reply to this message thank you people

[labtecftw]

well, its always sad when you lose your charger

the battery has 2 kables one is + and one is - if you van find out how much Volt the battery has you can buy another adapter and 2 pin sets (a 0 and a - wich you can connect)

but these link things between the battery and the other end of the cable do the same with the charger you bought now you are able to connect the battery to the charger and to the heli

[wiggleboy1]

thank you so much dude thank you thank you

[labtecftw]

np:P srry for the mystakes in the text i had to typ it kinna fast

[rudebwoi93]

on my syma fly dragonfly 2005 9093 chopper it spins round nd round but if u turn this white screw a bit it reduces that u just gotta fiddle about with it dont cut anything

[LTF85199]

excellent idea to tare before flight, thanks!

[Reptilia12]

as for the video - as soon as he took off, i was thinking - there it goes over the fence...

[Reptilia12]

I just bought a Syma 608 Mosquito. Not as bis as this one, but it has dual contra-rotating blades on the main rotor and the tail rotor spins on the same axis as the main rotor (vertical). The Radio Controller has digital left/right trim buttons and it is very easy to eliminate spin - and even compensate for when the battery is running down. I am still learning to fly in straight lines without doing a big arc or forgetting to hold altitude :)

[robertalden123]

Love the Khazestani birtday wrapping paper at the end...Shakes the box...Ohhh i wonder what it can be?

[zuler51]

hwdp

[dubspins]

whats the point of having a chopper that just spins in yaw???

looks like you cant really control which direction it goes at all....

hmmm

[nobiirock]

no he cant its a 2 channeled one

[trebbor58]

Sort of like a giant piccoo z or airhogs havoc.....

[djemil5]

Looks cool

[neolexington]

i've flown mine, not overly impressed with it. but for $45 its a fun toy.

[Computergaz]

What do you find is the problem with it? Does it have the inherent spinnies (constantly spins around the axis either left or right)? This appears to be a thing for the Syma helicopters, too much torque to the left. It can be overcome with some tweaking to the rear tail rotor (trimming the blade a little).

[akhirah]

which part? mine keeps spinning like crazy.

[Computergaz]

Trim the rear tail rotor by a 1/4 of an inch evenly.

This reduces the input thrust of the rear rotor, to a a more manageable level. I might add, "do this at your own risk!!". Should you do it wrong, the tail rotor will be rendered useless!!

[akhirah]

that is what im afraid of! Do you have a picture of the tail rotor and point to exactly where i should trim? im a newbie to this.

[Computergaz]

Good to see a video on the Syma model 603.This is Syma's newest model in the line up. I have recently purchased one, but not yet had the opportunity to fly it due to shocking weather conditions we are experiencing at present.

[djemil5]

Hey Computergaz where did you buy it. Hobbytron has it for 55. And the guy who sold it at my local mall for 45. is no longer there. I'm willing to give it another try. By the way, how many flights did you get from your last Syma before it broke?