@GumaPk Usually this is caused by the wrong version of screen being installed. I would check to make sure that the replacement screen is the exact match / version of the N95 you have.
WOW, this is great. My screen is fine it's the "Cable", I've been told that I need to replace. The phone is working but the screen won't turn on. Any help with this? Thanks.
@Shobna9 If it is the LCD flex cable which is damaged, then replacing your LCD screen will give you a new flex cable which will resolve the issue. However, there are many "cables" throughout the N95, so it depends on which cable is damaged. We do offer replacements screens and parts at RepairsUniverse (dot) com. Good luck!
Sziasztok!Nekem Nokia N95-öm van és miért fordult meg a képernyő?És valamikor az se látszik.Van olyan mikor visszaáll az eredetibe. Mit kell tennem?Köszönöm: Szandy
hi i drop my phone in water nd its stop working but i open the phone nd take out battery left like tht for few days & it start working but after 1 month screen stop working but phone is working i can receive calls but my screen is black so it could be lcd or something?????thank you very much
i have a nokia n95 8gb! i seem to be having problem with the lcd. the screen has gone blank or dark but there is still power on the phone! im still able to call it and call someone but i cant see anything! how much would it cost to repair it and how long would it take?
@LIP3XGunner Hi, sounds like your LCD is damaged, possibly the ribbon cable. It will probably get worse over time. A new LCD screen from the RepairsUniverse (dot) com web site should get your phone fully working again.
I dropped my N95 and now the screen doesn't show anything at all (Not even a light).. Everything works apart from the screen and I can even still take pictures which end up on the memory stick. What would the problem be? Cheers.
i need to change the screen on my n95, i have the replacement and tools, but the little screws are rounded and i cannot undo them. do you have any solutions?
hi, i fucked the connection of the lcd to the board of the phone, i broke a litlle gate where the wire of the lcd is connected . What can i do to fix that ?
cattieman182 - that is exactly what has happened to mine. I followed the instructions, the connector ribbon seems to be firmly in place, i cant see how i can possibly make the connection between the ribbon from the new screen and the connection on the phone any better.
I get the power on sound, and also the blue LCD's under the keypad, but no pic/light whatsoever on the actual screen.
guess your only choice now is to take it to a phone doctor... atleast you won't have to buy a new lcd through them. they charge an arm and a leg for lcds the bastards.
Plesae help! The upper left screw broke on my phone. I searched on the internet and many people had the same on the exact same screw. How can I open it now?
Yes !! if the t5 screw is strip already the only way you can removed by destroying the front housing not the rear slide , you have to save it and once you open it , then thats the time you can removed the golden screw holder from the rear silver slide and ive done hundreds of customer having the same problems with you , if you dont know how to do it carefully , just ask the the pro and they will do what ive tell you .Thanks for the reply and goodluck !!!!
You got to have a Torx-5 (T5) screwdriver. Without that tool, you'll probably (just like me) fuck up the screws, and make it nearly impossible to get them out. After I 'screwed' it, it costed me a lot of work to get them out.
My father helped me, he's an optician, so he's very experienced with screws en all that. We finally used an automatic grinder to make a little trench in the head of the screw, which made it possible to use another screwdriver. Good luck!
How much for a lcd screen for this nokia n95 please, i just sat on mine arghhhhhhhhh, it has like multi colours all over the screen so i cannot see what im texting or who im calling, i called my local doctor 5 times trying to speak to me mother : )
£62 seems fair, but i went into the o2 shop itself and was quoted at least £150 lol bloody cheek....i did for £18 : ) little bit of advice, on ebay type in rubbercasing for nokia n95 i bought for 99p and it looks awesome like a new phone and protects
Do you use a t5 screwdriver for this?
RyanPlaysShizz 3 months ago
@RyanPlaysShizz Yes the N95 does use a T-5 Torx screwdriver.
RepairsUniverse 3 months ago
@RepairsUniverse Some ass told me t6, and I got a t6, didn't fit.
*ragemode
RyanPlaysShizz 3 months ago
@RyanPlaysShizz The N95 has many different version, however the original N95 does use only the T5. Some other versions do use T6's I believe.
RepairsUniverse 3 months ago
grava bien po mierda!!
McflyGalaxydefenders 5 months ago
when i changed My Lcd my screen shines ,thats all ,i cant see anything only shines can someone help me? plz
GumaPk 5 months ago
@GumaPk Usually this is caused by the wrong version of screen being installed. I would check to make sure that the replacement screen is the exact match / version of the N95 you have.
RepairsUniverse 5 months ago
WOW, this is great. My screen is fine it's the "Cable", I've been told that I need to replace. The phone is working but the screen won't turn on. Any help with this? Thanks.
Shobna9 7 months ago
@Shobna9 If it is the LCD flex cable which is damaged, then replacing your LCD screen will give you a new flex cable which will resolve the issue. However, there are many "cables" throughout the N95, so it depends on which cable is damaged. We do offer replacements screens and parts at RepairsUniverse (dot) com. Good luck!
RepairsUniverse 7 months ago
It should say "how to remove your nokia n95 screen to replace it"
noahrhino 9 months ago
i have a question. the vga camera is stuck on the flex? or can i buy a flex without a camera and moveit ?
martzyi 1 year ago
Hello will the screen still work when i replace it as i have broke the clip of where you slide the ribbon in it
nathanhuit 1 year ago
@nathanhuit If the screen is still able to make the correct connection it will be Ok. It depends how damaged it is.
RepairsUniverse 1 year ago
I dont have any screw drivers small enough to open the cover. Any suggestions?
soothingrelaxing 1 year ago 2
@soothingrelaxing You can find the correct screwdriver at RepairsUniverse (dot) com.
Do not attempt to try it will the wrong screwdriver as you will strip the screw and then it is really hard to remove.
RepairsUniverse 1 year ago
@RepairsUniverse ive got the t5 one and it not working i can unscrew it :(
MrTvshowclips 1 year ago
@RepairsUniverse ive striped the scrwes at the hed of them now how to remove
MrTvshowclips 1 year ago
Sziasztok!Nekem Nokia N95-öm van és miért fordult meg a képernyő?És valamikor az se látszik.Van olyan mikor visszaáll az eredetibe. Mit kell tennem?Köszönöm: Szandy
Szandy91 1 year ago
@Szandy91 ish bin pooja karkare..can u please use english??
poojakarkare 11 months ago
Very helpful video! With this instruction changed mine in a few minutes, working phone again!
Notimetoloseify 1 year ago
@Notimetoloseify Glad we could help.
RepairsUniverse 1 year ago
Is this a N95 8GB or a "normal"?
TheSyleP 1 year ago
@TheSyleP This is the standard Nokia N95 but the N95 8GB is very similar.
RepairsUniverse 1 year ago
@RepairsUniverse
Thank you
TheSyleP 1 year ago
hi i drop my phone in water nd its stop working but i open the phone nd take out battery left like tht for few days & it start working but after 1 month screen stop working but phone is working i can receive calls but my screen is black so it could be lcd or something?????thank you very much
sapnasanoo 1 year ago
@sapnasanoo Yes sounds like the LCD screen is damaged. You can find these replacement parts on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
Really helpful, given me courage to have a go, thank you.
BaptistJon 1 year ago
@BaptistJon Glad we could help!
RepairsUniverse 1 year ago
Merçi pour cette vidéo ,
MarseilleSection13 1 year ago
i have a nokia n95 8gb! i seem to be having problem with the lcd. the screen has gone blank or dark but there is still power on the phone! im still able to call it and call someone but i cant see anything! how much would it cost to repair it and how long would it take?
flips4us 1 year ago
My N95 since todays morning is going nuts.
The screen often gets mirrored and blurry, and sometimes only showing half of the screen, if i close the slider it corrects.
If it works properly when open when closed it messes up.
Any clues of what it might be?
LIP3XGunner 1 year ago
@LIP3XGunner Hi, sounds like your LCD is damaged, possibly the ribbon cable. It will probably get worse over time. A new LCD screen from the RepairsUniverse (dot) com web site should get your phone fully working again.
RepairsUniverse 1 year ago
my n97 phone works just the screen seems like its not on does that mean i need a new screen?
snotface26 1 year ago
@snotface26 Yes, sounds like you need a new screen. You can find these on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
@snotface26 nah dude check your brightness settings and if ur battery is placed correct
OfficialDJDSign 1 year ago
what did you do?
daviT1992 1 year ago
I dropped my N95 and now the screen doesn't show anything at all (Not even a light).. Everything works apart from the screen and I can even still take pictures which end up on the memory stick. What would the problem be? Cheers.
noddythegit 1 year ago
Sounds like you just need a new LCD screen. You can find these on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
Great help. Thanks for the post.
whitechang 1 year ago
glad we could help.
RepairsUniverse 1 year ago
hey
i have problem tht...my lcd is solid... but can't shw any thing..?
is it ribbion problem..?
azmnoq 1 year ago
LCD is probably damaged. A new on should sort this.
RepairsUniverse 1 year ago
hi,
i need to replace my screen but the screws are rounded, can anyone offer advice on how to remove them?
timm
fernandobondebon 2 years ago
hi,
i need to change the screen on my n95, i have the replacement and tools, but the little screws are rounded and i cannot undo them. do you have any solutions?
regards
timm
fernandobondebon 2 years ago
help i cant turn my blutooth on!!!! plz help me!!
commando331 2 years ago
hi, i fucked the connection of the lcd to the board of the phone, i broke a litlle gate where the wire of the lcd is connected . What can i do to fix that ?
Vib3333 2 years ago
I did the same thing. Go on ebay and buy an N95 ribbon/slider.
craigyoungw 2 years ago
thanks from italy!
lomogabry 2 years ago
xDDDDDDDDDDDD
VERY NICE
erickzhan 2 years ago
Hi Guys, Is it easy to replace earpiece on this device? Is it easy to get to? Help please.
JATTalwaysFUCKchamar 2 years ago
Yes. The earpiece just sits on a set of contacts above the screen.
uzaiyaro 2 years ago
Great brief video, I wonder if LCD screens are different from version 1 to version 3?
I have the N95-3
ahanash 2 years ago
Comment removed
ahanash 2 years ago
Comment removed
ahanash 2 years ago
so what do i need to buy? how much are the lcd replacements and whatnot
mrpatty29 2 years ago
We have this screen on our repairsuniverse (dot) com website. Check the site for latest prices.
If you have any more questions please ask our experts on the live chat or via email.
RepairsUniverse 2 years ago
cattieman182 - that is exactly what has happened to mine. I followed the instructions, the connector ribbon seems to be firmly in place, i cant see how i can possibly make the connection between the ribbon from the new screen and the connection on the phone any better.
I get the power on sound, and also the blue LCD's under the keypad, but no pic/light whatsoever on the actual screen.
Does anyone have any tips or suggestions?
Thanks
stevecorino 2 years ago
guess your only choice now is to take it to a phone doctor... atleast you won't have to buy a new lcd through them. they charge an arm and a leg for lcds the bastards.
Blitzwolf44 2 years ago
I have do that..
But it wont get any screen.
I get sound but i cant see anything on the screen.
There is no ligt
cattieman182 2 years ago
Comment removed
ranjit3o 2 years ago
thanx 4 the video mate
chizz786 2 years ago
I have replaced satisfactory my nokia lcd display, thank you!!
MrCovax 2 years ago
This has been flagged as spam show
iPod, Mobile Phone and Notebook Repairs
Unlocking, LCDs, Batteries, Water Damage and lots more
Melbourne, Australia
tel : 9328 8068
JamesQV2apartment 2 years ago
hey bro i need your help! help me plase
when i plugin my headset i can hear only mono not sterio why ?????
fitimshaqiri 2 years ago
Plesae help! The upper left screw broke on my phone. I searched on the internet and many people had the same on the exact same screw. How can I open it now?
xxBlackpspxx 2 years ago
hi the only way you can disassemble it is by destroying the front housing and buy the new front housing or try using T6 bit.
mariatch 2 years ago
never u just say dat to make me destroy my phone. there r ppl which have same problem like me and can fix it a different way
xxBlackpspxx 2 years ago
Yes !! if the t5 screw is strip already the only way you can removed by destroying the front housing not the rear slide , you have to save it and once you open it , then thats the time you can removed the golden screw holder from the rear silver slide and ive done hundreds of customer having the same problems with you , if you dont know how to do it carefully , just ask the the pro and they will do what ive tell you .Thanks for the reply and goodluck !!!!
mariatch 2 years ago
Is the N95 8GB the same?
TopGear6666 2 years ago
NO THERE NOT THE SAME!!!
mariatch 2 years ago
mariatch <- Alright alright no need to shout I know now that they are not the same I've changed screens on both N95s & the N96.
The N95 8GB & N96 screens are the same, except the N96 screen is stuck down from the back.
TopGear6666 2 years ago
no mate im not shouting mate , just lazy to change the caps lock , ciao!!!
mariatch 2 years ago
LOL no problemo
TopGear6666 2 years ago
i know u have to buy a different screen for the 8gb but do u fix it the same way?
anyone?
magicspacemonkey 2 years ago
Yes you do. It is extremely similar fitting.
You can find the screen on our website. RepairsUniverse (dot) com
RepairsUniverse 2 years ago
know the torx screwdriver which is it t5 or t6 ?
Aaron03skater 2 years ago
It's a T5
TopGear6666 2 years ago
T5 FOR THE FORNT AND T6 FOR THE BACK ...
mariatch 2 years ago
Makes it look so easy on the video, Cant get the bloody screws out !!!
nshaw75 3 years ago
You got to have a Torx-5 (T5) screwdriver. Without that tool, you'll probably (just like me) fuck up the screws, and make it nearly impossible to get them out. After I 'screwed' it, it costed me a lot of work to get them out.
PietjeA1 3 years ago
bro how did u get around that ..i did the same thing
djajwan 3 years ago
My father helped me, he's an optician, so he's very experienced with screws en all that. We finally used an automatic grinder to make a little trench in the head of the screw, which made it possible to use another screwdriver. Good luck!
PietjeA1 3 years ago
Is it same trick whit N95 8Gb version? Can I make it same way?
Careica 3 years ago
How much for a lcd screen for this nokia n95 please, i just sat on mine arghhhhhhhhh, it has like multi colours all over the screen so i cannot see what im texting or who im calling, i called my local doctor 5 times trying to speak to me mother : )
s3ansk1 3 years ago 2
i an lcd for n95 off ebay for 35 aussie dollars.
Lebbbz 3 years ago
thats funny dude.
i sat on mine too.
got a quote from nokia of £62. fair play to nokia it is good and good service but i think i will fix it myself
skanskar 3 years ago
£62 seems fair, but i went into the o2 shop itself and was quoted at least £150 lol bloody cheek....i did for £18 : ) little bit of advice, on ebay type in rubbercasing for nokia n95 i bought for 99p and it looks awesome like a new phone and protects
s3ansk1 3 years ago
lol same here all multi coloured now
but yh from ebay the cheapest you can get it is £17
PSPx5000 3 years ago
£20 UK including screwdrivers
nelmser 2 years ago
Thank you so much for posting. great vid.
thank you for rescuing my mobile.
You have a friend in germany now.
thank you so much.
agothor 3 years ago
Is this the same for the 8gb?
ridethelightning6669 3 years ago
can the same procedure be applied for the nokia 6500?
lybee821 3 years ago
You may of blown the backlight on the LCD. Its hard to say for sure without seeing but hopefully its just the LCD.
RepairsUniverse 3 years ago
nice guide my screen is broken i just need to buy a new one
ditlev007 3 years ago
We have them on our website. In stock, and can ship immediately.
RepairsUniverse 3 years ago
could you add annotations to this video?
arekolek 3 years ago
i just finished replacing my n95 lcd screen.
@ all :
the little "handle" on the phone lcd connector is very breakable. lift it very carefully.
(as shown at 1mn23).
(i broke mine but it finally works ... )
i used a T6 screwdriver.
biteuljiouce 3 years ago
Yes, T5 ia required.
RepairsUniverse 3 years ago