I love when people think 2 stroke's can't have a turbo, and they know so much on y they won't work, but really they have no clue how the ports work with the pipe, for the one's that don't believe type in TurboShee, it's only 421cc beating a 800cc plus motor.
@fightercar This is not a car,this is a two-stroker and it is using a tuned pipe so it shouldn't be mounted directly on the engine or you will mess up the exhaust resonance and kill performance. Even cars have turbine systems mounted all the way back on the exhaust where the muffler should be. Plus, this engine is designed to run at its power-brand at all times so the lack on response time is compensated while the main rotor is gaining speed.
The only way to effectively 'super' or 'turbocharge' a engine like this is to use an expansion chamber on the exhaust. It simply uses pressure waves to scavenge exhaust from the cylinder, and then a partial new charge, then pushes the partial new charge back through the exhaust port into the cylinder once the piston has passed the intake port, thus creating 'boost'.
Enemy though, the tiny turbo is cool...what's the brand/part#/specs...I'm sure I could use it for something....
@TestECull omg noob...they didnt runied it...ussualy i stay back with coments but ur real noob....turbo is meant for 4 stroke engines bcs it can make compresion...but still works on 2 stroke...not good as on 4 t but works...and adds some power to motor
@theCROfna You simply can not turbocharge a piston-valve two stroke engine. There's no way to pressurize the combustion chamber if you have the exhaust and intake ports open concurrently, which is the case. Since ALL two stroke glow engines are of this variety, this means you can not get any meaningful power by boosting them.
If you want an example of a two stroke that can accept boost, go check out some Detroit Diesels. Any other two stroke using that principle will also accept boost.
@theCROfna ...Glow engines don't have direct injection, and at any rate that does nothing to provide a seal against which you can build boost. As for valve positions....Read up, fool. Two stroke RC engines do not have valves you can adjust! The piston uncovers ports, exhaust and intake, each and every time it reaches BDC. IT closes them all again as it travels back up on compression. YOU CAN NOT BUILD BOOST IN A TWO CYCLE GLOW ENGINE!
@TestECull and 1 more thing....''I hope that's not a two stroke'' now ur real noob...u dont see difrence betwen 2 stroke and 4 stroke in sound?...and look at it exhaust 4t doesnt make so much smoke..so a blind or a deaf man could say that this is 2 stroke
What's the use of a turboed helicopter? its not like you're going to see improvement in miles per hour. maybe a better response but these helicopters naturally aspirated have a fast response.
Wow that is awesome!! Not sure about glow engines but wouldn’t it be better placed before the silencer? I.e. pipe it straight from the engine into the turbo then have the silencer after the turbo? The exhaust gas would have more energy then as it would still be exploding out of the engine. Or do the glow engines need the exhaust for back pressure or something?? Totally awesome !
Wow that is awesome!! Not sure about glow engines but wouldn’t it be better placed before the silencer? I.e. pipe it straight from the engine into the turbo then have the silencer after the turbo? The exhaust gas would have more energy then as it would still be exploding out of the engine. Or do the glow engines need the exhaust for back pressure or something?? Totally awesome ! make a BOV for it now!!!
AfghanKnight007 - Why do you want one? To strap a fucking bomb to it and fly it somewhere where there are lots of innocent peopel? fucking terrorist mother fucker............hope you and your mum die of aids :)
For who ever wrote the turbo needs to be between the engine and tuned pipe is wrong, because the sound wave that forces the air fuel charged back in needs to be before the turbo so there is no interference, and if u dont belive me look up turbocharged snowmobile it's a two stroke and the same principle applies.
I think it is useless. First off all turbo place is wrong. It must be on between engine and pipe second air which is coming from turbo must be cooled by a radiator.
In current case I dont believe that turbo is running on enough output presurre and air coming to engine is very hot. Your engine can be easly on lean..
Well you can't put it between engine and pipe, because you would change the resonance of the muffler which will result in a performance loss. Always think 2-stroke!! The sonic pressure pulse is your outlet valve and must not be obstructed.
your talking out your stupid asshole shut up your making me mad with your nonsense babble it sounds like you took something you read on the internet(which was wrong) paraphrased it but when you did you forgot most of it either that or you are retarded
at what RPM does your turbine spin when full head speed is applied? im assuming somewhere around 50k, so what type of casting/molding did you use for the turbine? finally, if you plan to sell these turbos could you shoot me an email with any updates? enoctis[at]yahoo[dot]com
@MJPilote holy crap. u made it yourself? i feel sorry 4 you when you had to make that turbine disk thing inside. u need heaps of patience. Keep up the good work :P
why didnt it fly?
bergi85 2 months ago
This has been flagged as spam show
I love when people think 2 stroke's can't have a turbo, and they know so much on y they won't work, but really they have no clue how the ports work with the pipe, for the one's that don't believe type in TurboShee, it's only 421cc beating a 800cc plus motor.
Turboshee421 2 months ago
ta wrong that installation of the turbine
fightercar 4 months ago
@fightercar This is not a car,this is a two-stroker and it is using a tuned pipe so it shouldn't be mounted directly on the engine or you will mess up the exhaust resonance and kill performance. Even cars have turbine systems mounted all the way back on the exhaust where the muffler should be. Plus, this engine is designed to run at its power-brand at all times so the lack on response time is compensated while the main rotor is gaining speed.
RFTAEC100 3 months ago
were did u get the turbo
TDJDriftersBoss 4 months ago
is this to get more boyracers into helis? "oooo look its got a turbo on it!" wank wank wank. maybe some big turbo stickers down the side will work :)
mark675 5 months ago
@mark675 Well no, to be honest, I made something and liked the idea of putting it on a heli engine.
I build 2 stroke racing engines, and this is just for the fun of it. That's the purpose of having a hobby, to have fun.
MJP
MJPilote 5 months ago 6
The only way to effectively 'super' or 'turbocharge' a engine like this is to use an expansion chamber on the exhaust. It simply uses pressure waves to scavenge exhaust from the cylinder, and then a partial new charge, then pushes the partial new charge back through the exhaust port into the cylinder once the piston has passed the intake port, thus creating 'boost'.
Enemy though, the tiny turbo is cool...what's the brand/part#/specs...I'm sure I could use it for something....
AJBlanchard82 5 months ago
does that improve anything on the heli?
ravijagdev 6 months ago
I hope that's not a two stroke, because if it is, you dumbasses have ruined that engine. This belongs on a four stroke.
TestECull 8 months ago
@TestECull omg noob...they didnt runied it...ussualy i stay back with coments but ur real noob....turbo is meant for 4 stroke engines bcs it can make compresion...but still works on 2 stroke...not good as on 4 t but works...and adds some power to motor
theCROfna 7 months ago
@theCROfna You simply can not turbocharge a piston-valve two stroke engine. There's no way to pressurize the combustion chamber if you have the exhaust and intake ports open concurrently, which is the case. Since ALL two stroke glow engines are of this variety, this means you can not get any meaningful power by boosting them.
If you want an example of a two stroke that can accept boost, go check out some Detroit Diesels. Any other two stroke using that principle will also accept boost.
TestECull 7 months ago
@TestECull yes u can...think abaut direct injection...and if u modify valves positions or put 1 way walwes on it u can make compresion.....
theCROfna 7 months ago
@theCROfna ...Glow engines don't have direct injection, and at any rate that does nothing to provide a seal against which you can build boost. As for valve positions....Read up, fool. Two stroke RC engines do not have valves you can adjust! The piston uncovers ports, exhaust and intake, each and every time it reaches BDC. IT closes them all again as it travels back up on compression. YOU CAN NOT BUILD BOOST IN A TWO CYCLE GLOW ENGINE!
TestECull 7 months ago
This has been flagged as spam show
@TestECull and 1 more thing....''I hope that's not a two stroke'' now ur real noob...u dont see difrence betwen 2 stroke and 4 stroke in sound?...and look at it exhaust 4t doesnt make so much smoke..so a blind or a deaf man could say that this is 2 stroke
theCROfna 7 months ago
@theCROfna u know that u can teach moneky to walk on 2 legs...but he is still monkey...same as u
theCROfna 7 months ago
@theCROfna Monkeys learned to walk on two legs by themselves, by crossing rivers. This is how we evolved to walk on two legs. =D
dezontk101 6 months ago
Ummm you CANT TURBOCHARGE A PISTON VALVE 2 STROKE!!!!!
balls2yourface 8 months ago
What's the use of a turboed helicopter? its not like you're going to see improvement in miles per hour. maybe a better response but these helicopters naturally aspirated have a fast response.
elchicoboy 9 months ago
How did you do that?
Busdude97 1 year ago
WHERE CAN I GET ONE?! OMG I want it noWWWWW
andrewj2k 1 year ago
Nice but ... its a pointless cause ... these helicoptwers are already very overpowered
and you want to give it more .... you crazy mann =)
RotorHead2652 1 year ago
thats just a big bowl of awesome
tomjw7 1 year ago
Mass produce these and you will make millions for hobbyist and small engines people
30GB 1 year ago
Wow that is awesome!! Not sure about glow engines but wouldn’t it be better placed before the silencer? I.e. pipe it straight from the engine into the turbo then have the silencer after the turbo? The exhaust gas would have more energy then as it would still be exploding out of the engine. Or do the glow engines need the exhaust for back pressure or something?? Totally awesome !
landy321 1 year ago
Wow that is awesome!! Not sure about glow engines but wouldn’t it be better placed before the silencer? I.e. pipe it straight from the engine into the turbo then have the silencer after the turbo? The exhaust gas would have more energy then as it would still be exploding out of the engine. Or do the glow engines need the exhaust for back pressure or something?? Totally awesome ! make a BOV for it now!!!
landy321 1 year ago
NICE, it's always cool to see people going above and beyond store-bought! :P
yasafusa 1 year ago
very cool
raganriley 1 year ago
This has been flagged as spam show
where can I find a turbo that small to buy?
sbdtasos 1 year ago
where can i get one of these????
ProteinBoogers 2 years ago
wow, i didnt know they made turbos for RC vehicles...... where did you get yours?
chaosrealm93 2 years ago
This comment has received too many negative votes show
wow a fucking helicoptor that stay stuck to the ground! Why do you DICKHEADS upload shit videos like this? why even waste your fuking time?
dazlia2 2 years ago
@dazlia2 you have a really good fucking point im sick of the bullshit too
ThePlaneboys 2 years ago
hi where can i get one please?
AfghanKnight007 2 years ago
AfghanKnight007 - Why do you want one? To strap a fucking bomb to it and fly it somewhere where there are lots of innocent peopel? fucking terrorist mother fucker............hope you and your mum die of aids :)
dazlia2 2 years ago
dazlia2. Now u r on my list. i will make u suck my cock b4 chopping ur head off..
AfghanKnight007 2 years ago
mmmmm yum yum lol
dazlia2 2 years ago
@dazlia2 Is this guy serious!?! 5 years old perhaps?
yasafusa 1 year ago
dude nice trex i love mine!
lamborghinicorvette 2 years ago
The heli, or the turbo?
sikewiley 2 years ago
where can i buy one?
bulafijione 2 years ago
This has been flagged as spam show
The heli or the turbo?
sikewiley 2 years ago
if u have a nitro rc car put the turbo on it and make a vid
sk8in4usa 2 years ago
For who ever wrote the turbo needs to be between the engine and tuned pipe is wrong, because the sound wave that forces the air fuel charged back in needs to be before the turbo so there is no interference, and if u dont belive me look up turbocharged snowmobile it's a two stroke and the same principle applies.
Chevymonster203 2 years ago
where can I find a turbo that small?
macsdad1108 2 years ago
i know thats so fucking sick does anyone know
454sskilla 2 years ago
OMG thats cool :D
tjernstr0m 2 years ago
it looks likes ur compressor side is on the exhaust lol r u running it backwards?
trex600npilot 2 years ago
were can i get one of those turbos?
wedobelive 2 years ago
wear can i get one?
ashley118118 2 years ago
hello I want a turbo like tuo.tu sell them? me the address where you bought?
daveweckl23 2 years ago
siete pazzi!!!
MIKYCIANCIO 2 years ago
its a 2 stroke engine with turbocharger?
how works a reed valve??
perdon mi ingles es malo , my english is bad..
Since the valve works with the turbocharger?
And if it is not an inconvenience(trouble) ... me podrias to spend(pass) a web where they sell these turbines
WARPUNK 2 years ago
lemme get tht turbo for my hpi rs4
str33trac3r1080 2 years ago
I think it is useless. First off all turbo place is wrong. It must be on between engine and pipe second air which is coming from turbo must be cooled by a radiator.
In current case I dont believe that turbo is running on enough output presurre and air coming to engine is very hot. Your engine can be easly on lean..
serhathakan 2 years ago
Well you can't put it between engine and pipe, because you would change the resonance of the muffler which will result in a performance loss. Always think 2-stroke!! The sonic pressure pulse is your outlet valve and must not be obstructed.
Ryan130376 2 years ago
your talking out your stupid asshole shut up your making me mad with your nonsense babble it sounds like you took something you read on the internet(which was wrong) paraphrased it but when you did you forgot most of it either that or you are retarded
therealmaximus 2 years ago
COOL! I want to have a rc turbocharger, Do you know where you can buy it ? And maybe you can sell your prototypes? Thnx
HyperAndMelig 2 years ago
Comment removed
HyperAndMelig 2 years ago
So did you make it yourself?
mxracer3651 2 years ago
Thanks guys, yes the turbo is selfmade prototype.
Will be making a new turbine wheel when I´ll have time to do it.
Turbine wheel is the first part that I made and it´s more suited to a bigger engine.
MJP
MJPilote 2 years ago 2
at what RPM does your turbine spin when full head speed is applied? im assuming somewhere around 50k, so what type of casting/molding did you use for the turbine? finally, if you plan to sell these turbos could you shoot me an email with any updates? enoctis[at]yahoo[dot]com
enoctis 2 years ago
how big is the motor in cc's??
firat123456789 2 years ago
@MJPilote holy crap. u made it yourself? i feel sorry 4 you when you had to make that turbine disk thing inside. u need heaps of patience. Keep up the good work :P
ravijagdev 1 year ago
it sounds sweet, dude
trxspirit 2 years ago
Sweet., I didn't know they made turbos that size.
Jetleaf 2 years ago