I was wondering about the range on this and also will it work on a car radio parked outside of ones home with the use of an antenna. Any help is appreciated. Thank you.
Hi, very nice. Here where I live there is a garage bell that is so loud. This works to help blind people to listen to cars moving out the garage, but , again is too loud, and I coundn't able to reduce this volumn just talking to the building administrator. Can this device works for a simple self sound emmiter (it is not fm or am) ? Tks
i know in fm the stronger transmitter usually wins out but you can also use an AM jamming method an just put a really loud and high pitch noise on the mp3 player it helps make any audio that gets through even more unreadable
I remembered building one and instead of putting music i used a simple circuit that produces a sort of siren sound, i used it to annoy my neighbor which plays his fm stereo so damn loud even at night haha
Mr.gasisfire I need uor hepl in a very small thing.
I did the whole circuit, everything is in it EXCEPT for the inductor that is close to the variable capacitor. What is that wire ? i don't understand what type of conductor is. I tried alot of small wires didn't work !!!
please what exactly the inductor (or wire) should be ? should i order it from an online website ? or what ?
Hi everybody, i have a question, i am not a professional in physics or electronics but i wonder, how do these kind of things (jammers, non nuclear emps) work? please no professional vocabulary, something easy to understand, thanks a lot!
@smsm444 Theoretically, yes if the signal i of greater strength and on the same frequency as the one the RC car uses. However, this is probably a different frequency than FM radio, because otherwise interference would have been inevitable as radio station would be jammers in that sense.
Look at the schematic. Link is in the desctrption. For the mp3 part I can't remember and I don't know where it is at the moment. I don't really use that one anymore but search something like add mp3 to fm ocilator or something of that nature.
No it's just that when you are really close to the jammer when you are tuning it, you interfere with the jammer just enouph so that when you are tuned and you stop touching the jammer it's is slightly off tune. You need to over time it just a tad so when you let go. It is tuned
You should definately upload the schematics for this! You can get a free accounts at file hosting sites where you can upload your schematic diagram. Post a link to the image in the INFO section of this video!!
well i dont have an antenna on it because then its illegal... without one though it will do about 50 feet. thats all i need for the bus and movie theatres!!!
Here we are allowed to buy a transmiter but we are not allowed to have a transmiter ;-)
I like your style with jamming the official propaganda transmitters ! I hate their music too.
At work I used a small transmitter in my pocket and I transmitted sounds of sheep and pigs in a barn. Or some times frogconcerts hahahaa. It's really fun !
This isn't technically jamming, it's just an fm transmitter that as stated is providing a stronger signal.
cozmium 4 days ago
Not sure if you're even still on YouTube, but I am very interested in building one of these. Can you help me with adding the mp3 part?
SundayWTL 1 week ago
if only they could do that for my wife's voice
29pu04 1 month ago
what are the blue and grey dot and where is your audio connected
NinjaMotion 3 months ago
zune?
Amorbellum 3 months ago
hi man,can you post a schematic that shows where to attach the 3.5 plug or just explain it in a comment
013dirtdiver 4 months ago
This has been flagged as spam show
resonse vido. please watch. youtube.com/watch?v=rP79Do167Vc
chubbychinchilla 6 months ago
Comment removed
chubbychinchilla 6 months ago
I was wondering about the range on this and also will it work on a car radio parked outside of ones home with the use of an antenna. Any help is appreciated. Thank you.
stranoparanormale 7 months ago
Man do tutorial on this, i need this vary much!
drtomorrowworld 8 months ago 3
how to wire the 3.5 plug
013dirtdiver 9 months ago
Hi, very nice. Here where I live there is a garage bell that is so loud. This works to help blind people to listen to cars moving out the garage, but , again is too loud, and I coundn't able to reduce this volumn just talking to the building administrator. Can this device works for a simple self sound emmiter (it is not fm or am) ? Tks
GusRJ70 9 months ago
metallica :) i dont know what was on the radio but you were right to block it out
johnnyeveryteen3000 10 months ago
Are you Canadian?
BackyardAmusement 10 months ago
i know in fm the stronger transmitter usually wins out but you can also use an AM jamming method an just put a really loud and high pitch noise on the mp3 player it helps make any audio that gets through even more unreadable
GMSamuelRhine 11 months ago
I remembered building one and instead of putting music i used a simple circuit that produces a sort of siren sound, i used it to annoy my neighbor which plays his fm stereo so damn loud even at night haha
renekenshin6573 11 months ago
How did you make teh circuit board?
buzz200066 1 year ago
1:36 I know out bus driver plays the crappiest music evar
00011theman 1 year ago
I guess this kid doesn't read his comments anymore.
choosewisely67 1 year ago
The schematic says #16 wire for the coil. Is that 16 guage? Also, does it have to be magnetic enamel coated wire?
choosewisely67 1 year ago
@choosewisely67 Also, can you tell us the value of the variable capacitor?
choosewisely67 1 year ago
@choosewisely67 yes and yes
justinmerre 1 year ago
@choosewisely67 16 swg for reference:
/wiki/Standard_wire_gauge
wateraarde 11 months ago
Mr.gasisfire I need uor hepl in a very small thing.
I did the whole circuit, everything is in it EXCEPT for the inductor that is close to the variable capacitor. What is that wire ? i don't understand what type of conductor is. I tried alot of small wires didn't work !!!
please what exactly the inductor (or wire) should be ? should i order it from an online website ? or what ?
please help me.
linkinway 1 year ago
Please can you send me the elements you used and tell me from where can i order them ?
please i need your help !
linkinway 1 year ago
where did you get the varaible capacitor
1011whitezombie 1 year ago
Hi! nice and pretty simple thing!:))
I like it..!
swedenmail 1 year ago
Hi everybody, i have a question, i am not a professional in physics or electronics but i wonder, how do these kind of things (jammers, non nuclear emps) work? please no professional vocabulary, something easy to understand, thanks a lot!
FRMTN202 1 year ago
is there any way boost the fm radio jammers wireless range rather than a taller antenna
1011whitezombie 1 year ago
@1011whitezombie
Use an antenna.
cantormath 1 year ago
i tryed to make your fm jammer but i cant find the right variable capacitor can you send me the numbers for the one you used
haker72757juan 1 year ago
would you have to adjust the varaible capacitor every time you change the station
1011whitezombie 1 year ago
could you play your music and changed the station(87-108 mhz)would you still hear your music
1011whitezombie 1 year ago
where did you connect the audio wire
1011whitezombie 1 year ago
on the circuit you've put in the description where do you connect the audio jack for external signal?
Tanatosss 1 year ago
could you use a 2N2222 transistor
1011whitezombie 1 year ago
@1011whitezombie
yes you can
PN2222 is the same as 2N2222
Tanatosss 1 year ago
Great way to confuse your neighbors when you are bored haha
WatchedProductions 1 year ago
can this block transmitted signals in RC toy cars??
smsm444 1 year ago
@smsm444 Theoretically, yes if the signal i of greater strength and on the same frequency as the one the RC car uses. However, this is probably a different frequency than FM radio, because otherwise interference would have been inevitable as radio station would be jammers in that sense.
Maskakoopa 1 year ago
Look at the schematic. Link is in the desctrption. For the mp3 part I can't remember and I don't know where it is at the moment. I don't really use that one anymore but search something like add mp3 to fm ocilator or something of that nature.
gasisfire 2 years ago
you did not tell how strong the variable capacitor or what king to use canyou tell me
haker72757juan 2 years ago
No it's just that when you are really close to the jammer when you are tuning it, you interfere with the jammer just enouph so that when you are tuned and you stop touching the jammer it's is slightly off tune. You need to over time it just a tad so when you let go. It is tuned
gasisfire 2 years ago
when u say it mite change so u have to re-tune it u mean it will drift off frequency ?
markybyeah 2 years ago
what transmitter chip did u use??? how many pins? and what pins did u attach the headphone jack to?
CoolBreezeHT 2 years ago
thats IF u used a radio transmitter chip
CoolBreezeHT 2 years ago
can you tell me how to build it
haker72757juan 2 years ago
This has been flagged as spam show
can i just buy that from you
boulespuantes 2 years ago 3
how did you set it up for the mp3
i am going to build one using the diagram you have because the one i made is not as strong but i want to add the mp3 part too
dasnipercombat 2 years ago
i will pay u 25 dollars to make me one!
TheAlchemist1023 2 years ago
Comment removed
themagicjellybeans 2 years ago
Awesome job!
You should definately upload the schematics for this! You can get a free accounts at file hosting sites where you can upload your schematic diagram. Post a link to the image in the INFO section of this video!!
I would love to build this!
Thanks!
oOsnObOardrOo 2 years ago
well i dont have an antenna on it because then its illegal... without one though it will do about 50 feet. thats all i need for the bus and movie theatres!!!
gasisfire 2 years ago
Hahaha ok.
The law is like a banana in Canada.
And I used to think only Dutch laws were crazy.
Here we are allowed to buy a transmiter but we are not allowed to have a transmiter ;-)
I like your style with jamming the official propaganda transmitters ! I hate their music too.
At work I used a small transmitter in my pocket and I transmitted sounds of sheep and pigs in a barn. Or some times frogconcerts hahahaa. It's really fun !
The look on their faces ! priceless !
gridlocksystem 2 years ago
@gasisfire no if its under 32 in or was it 22 feet? i cant remember look it up lol but under that its legal
00011theman 11 months ago
How far does the signal go when you hook up an antenna on it?
Check out my transmitter, i just build it a few weeks ago.
Now I want to make one from SMD components.
I made a amplifier for any fm oscillator that is 1 by 1 cm, but I can make it smaller because it was just a first try with smd.
thank you for your video and greetings from the Netherlands.
gridlocksystem 2 years ago
hey man have any one told u before ur a genuis
great thanks
to upload the schematics u just have 2 upload it at any file sharing site
and give us the link
alcomanda 2 years ago
I liek it, do you have schematics?
bilzoo2000 3 years ago
yes but im new and dont know how to post them
gasisfire 3 years ago
@gasisfire Hey could you make a video on how to do this ? I'm a chemist major and i dont understand schematics
Zamriasra 1 year ago
me too
hehehehhe
daron69 3 years ago
Im am totaly buying one off of you when you make another =D!
kingdom68 3 years ago 6