Guys most of your questions are answered on this pdf file, metals to use, heat problems, spacing, quantities of electrolyte, all there for you to read and learn, ill just ask is 5 seconds of your time in adds and then skip the add and the pdf will be loaded, the link is this one --> adf. ly/2rV6g don't forget to remove the space after you copy paste it to your browser thumbs up if you like it Thx in advance !
Water is 2 parts H and 1 part O. The H is being produced at the neg. poled plate and the O is being produced at the pos. poled plate. Being a 2 to 1 in production and the shape and constrution of the electrolyser, the H is building up from the center, first causing it to bulge upwards from the increased production and then being relieved of the pressure because water like electricity is lazy and seeks to find its lowest point and eventually evens out
BRO WHAT DISTILLED WATER R WE GOING TO USE, IS THAT A DRINKING DISTILLED WATER, OR THE DISTILLED WATER USE FOR THE VEHICLES BATTERY?? PLEASE, TNX U....
@foxnad Try using Natural Spring Water or water from the start of a creek. The reason i say that is because the more life energy (in other words, orgone energy) in the water the better it will work.
You could try using purified water but if you're gonna go that route make sure you charge it with Orgonite.
The time has come for Free energy to be revealed ,But Millions are spend in supressing that information,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Start the revolution!
It looks likes its about to have an orgasm and blow the center right out of it. By the way, shouldn't you be burning some of that gas off? Say, before it finds the pilot light on you hot water heater? Just sayin'...
The pulsing is because your battery charger has reached its maximum current. It has nothing to do with the cell. Hook an ammeter up and you should see it fluctuating.
is there not a build up of energy, then when gas is present the neg/ energy fires thro the gas instead of where water was present, overloads like a capacitor, shorts out and begins again....SORT OF THING LOL....LOL... I THINK.....LOL.
Victor Schauberger talks of pulsating rythmical expansion and contraction.
interesting.
I dont understand the orgone in regards to HHO production,and would like to see more hard science done with it,rather than people speaking in terms feeling its vibe,and such.
I am making a joe cell with electron extraction ring,for some tests....
The cell in this video has been charged on and off for a few days - following the NEG first rule but honestly I didn't track the minutes or hours for charging. I kept the same water however. Electrolite was being used, about 1/2 tsps in that large jar you see. The water was straight distilled from the jug at Wal-mart.
How long have you been charging it for each time? It looks like you've got some nice Stage 3 Happening. What type of water are you using and does it have an Electrolite in it? Pulsing usually suggests that you are at stage 3 so you've probably got some good orgone production happening.
This has been flagged as spam show
Interesting heat beat.
Hhydrogen4Power 5 days ago
Guys most of your questions are answered on this pdf file, metals to use, heat problems, spacing, quantities of electrolyte, all there for you to read and learn, ill just ask is 5 seconds of your time in adds and then skip the add and the pdf will be loaded, the link is this one --> adf. ly/2rV6g don't forget to remove the space after you copy paste it to your browser thumbs up if you like it Thx in advance !
saka101hog 4 months ago
Tony Stark? No way, it is too!.. go and watch Iron Man.
benzie13 5 months ago
Water is 2 parts H and 1 part O. The H is being produced at the neg. poled plate and the O is being produced at the pos. poled plate. Being a 2 to 1 in production and the shape and constrution of the electrolyser, the H is building up from the center, first causing it to bulge upwards from the increased production and then being relieved of the pressure because water like electricity is lazy and seeks to find its lowest point and eventually evens out
lwblack64 7 months ago
I know what is it doing but I don't know what is the point
vartatoosh 8 months ago
BRO WHAT DISTILLED WATER R WE GOING TO USE, IS THAT A DRINKING DISTILLED WATER, OR THE DISTILLED WATER USE FOR THE VEHICLES BATTERY?? PLEASE, TNX U....
foxnad 9 months ago
@foxnad Try using Natural Spring Water or water from the start of a creek. The reason i say that is because the more life energy (in other words, orgone energy) in the water the better it will work.
You could try using purified water but if you're gonna go that route make sure you charge it with Orgonite.
Lloydamar 9 months ago
This has been flagged as spam show
tinyurl DOT com/4jajb2f
ipodbrian19 1 year ago
This has been flagged as spam show
The time has come for Free energy to be revealed ,But Millions are spend in supressing that information,Go to LT-MAGNET-MOTORdotCOM and get the blueprints for a genuine magnet motor ,Start the revolution!
baccaratbargaineq 1 year ago
HOW MANY LITERS PER MINUTE ARE YOU GETTING ?
GULFCOASTCLEANENERGY 1 year ago
The negative center creates a Centripetal current while the Positive outer creates orbital rotation.
Centripetal spin always overtakes orbital rotation.
The center charge is like a vortex which pushes all energy outward radially.
After each oscillation wave, you will see a pulsation.
Increase the signal from the battery and you'll see the pulsation flicker faster.
Compare the pulsation of your joe cell to the 4 mile wide UFO filmed by NASA during the Tether Incident:
/watch?v=Ox6BtwDmm3c
TheRealVerbz 1 year ago
It looks likes its about to have an orgasm and blow the center right out of it. By the way, shouldn't you be burning some of that gas off? Say, before it finds the pilot light on you hot water heater? Just sayin'...
catfish4975 1 year ago
The pulsing is because your battery charger has reached its maximum current. It has nothing to do with the cell. Hook an ammeter up and you should see it fluctuating.
nucleochemist 1 year ago
battery chargers operate in pulses as where a battery is stable.that's why we set a phase for better production
skyfox32775 1 year ago
Open your eyes... it is battery 12v energy.. that's all... nothing else.
marconoa 1 year ago
This has been flagged as spam show
1 take a deep breath
2 think of someone you like
3 press f10 five times
4 send this to five youtube videos
5 look at your background
TheSvartdemon 1 year ago
is there not a build up of energy, then when gas is present the neg/ energy fires thro the gas instead of where water was present, overloads like a capacitor, shorts out and begins again....SORT OF THING LOL....LOL... I THINK.....LOL.
thom in scotland....I THINK...
intresting tho.
NEON271156 2 years ago
This is what they call a stage 3, and this is where it is possibly creating oregon. I have also heard that this is what is needed to run a car.
Look into stage three Joe cells.
freespeechnetwork (dot) ning (dot) com
Take a stand for free speech on the net!
Peace
jedirock 2 years ago
@jedirock you mean argon?
whatsdare 1 year ago
It's ALIVE!!!!
It's ALIVE!!!!
Art4Law 3 years ago 8
Thats water pumping from the bottom of the cell raise it about 2' off the bottom of the cell it well stop.
busybill2 3 years ago
Waiting for an alien to pop out of the middle... How many amps you think?
Tks for posting, interesting!
nzlook11 3 years ago
somebody needs to put a mouse into that glowing center, see what happens...not to be cruel, just wonder if it's dangerous.
jarlog1979 3 years ago
Hi there, great video. Can I ask what Electrolite you are using in the water?
TheJoeCellProject 3 years ago
Victor Schauberger talks of pulsating rythmical expansion and contraction.
interesting.
I dont understand the orgone in regards to HHO production,and would like to see more hard science done with it,rather than people speaking in terms feeling its vibe,and such.
I am making a joe cell with electron extraction ring,for some tests....
good job
5 stars
m3sca1 3 years ago
The cell in this video has been charged on and off for a few days - following the NEG first rule but honestly I didn't track the minutes or hours for charging. I kept the same water however. Electrolite was being used, about 1/2 tsps in that large jar you see. The water was straight distilled from the jug at Wal-mart.
HydrogenTechnology 3 years ago
What Electrolite did u use? I think I just bought the same Jar as you. lol
suddenreligion 3 years ago
How long have you been charging it for each time? It looks like you've got some nice Stage 3 Happening. What type of water are you using and does it have an Electrolite in it? Pulsing usually suggests that you are at stage 3 so you've probably got some good orgone production happening.
suddenreligion 3 years ago