Try using an iron core, it seems to improve the power production substantially from copper, as I saw in another demonstration of a guy in Canada, look for the videos of Mr.Anguswangus in particular the one concerning the success of his SG.; Good luck my friend.
Firstly,air coil transormers are inherently high frequency.The MOT is getting hot because it has a magnetic shunt inside which is designed to restrict power delivery to magnetrons.It gets hot, because of eddy currents in the shunt.Thirdly, if you look at the kapagen website, in particular the Input/Output power measurements,1189W are being FED IN from AC,and only 1017W are being delivered to the lights.There is a 4% energy loss in the system.Their own measurements invalidate their theory.
I think it is your spark gap. You are using a conductive loop instead of a direct gag. The loop is causing eddie currents and interfering with the constant intermission of magnetic flux. zyou can attenuate the spark gap with resistors but it would be a trial an error to attenuate (resonant frequency) the gap to perfection. Simple point to poinf would be better for tuning the system.
I actually have two grounds connected 30ft apart. This device is really lacking in it coil ratios as I've come to find out. Also, it seems trying to do this with 60HZ is a big mistake the test really needs to be done above 20,000HZ even better in the MHz range. This is according to Don Smith.
nice vid. just be careful of what your touching. High enough amps and that spark gap will reach out and bite ya through that lexan plastic.
Just out of curiosity, how did you come about by using such and such number of turns of wire & gauge? Was this calculated out from a step-up/step-down transformer equation, or copied from plans somewhere?
i didnt see anything going to the earth for a ground reference. i thought the whole point of the Kapanadze generator was that it used the earth as a giant capacitor!
@14jerseyboy56 hey ditto, I was just about to say "doesn't the kapagen need a wire connected to ground?". I checked out other videos and sure enough, the ground is needed. Some vids show people using two grounds.
hey ur spark gap on that cirlce spark gap u will be losing a tremendous amount of power. switch to a soild tungsten or stainless/steel straight {---- ----} like this. the cirlce spark gap cause a flux i power because it is trying to excape the spark gap before the 1mm gap. think of a jacobs ladder and how one side is always higher in the accent up the coil because it discharged first or found short gap then the official spark gap. let me know if this helped beacause it could be ur ground
No need for bad language!
Captainloz 21 hours ago
пидарасы на русский перевидите
xysontea 2 days ago
Good work...
If you want to Get the Plans for the Free energy generator
Go To Google and Search for "Top Magnetic Generator"
Choose the First Result (Skip The Advertisements)
subhankarkudghat 2 weeks ago 4
kool
HorizonDelta 1 month ago
Try using an iron core, it seems to improve the power production substantially from copper, as I saw in another demonstration of a guy in Canada, look for the videos of Mr.Anguswangus in particular the one concerning the success of his SG.; Good luck my friend.
iamh2ok9 2 months ago
Firstly,air coil transormers are inherently high frequency.The MOT is getting hot because it has a magnetic shunt inside which is designed to restrict power delivery to magnetrons.It gets hot, because of eddy currents in the shunt.Thirdly, if you look at the kapagen website, in particular the Input/Output power measurements,1189W are being FED IN from AC,and only 1017W are being delivered to the lights.There is a 4% energy loss in the system.Their own measurements invalidate their theory.
MCWAU 2 months ago
The fact that you succeeded to light anything is an accomplishment!
Begbucks 2 months ago
what exactly is this supposed to do? It looks like a cool machine just wondering about it's purpose
joedell71 2 months ago
@joedell71
idea its to make circuit for free energy
irmulioks 2 months ago
В Грузии на "ура" это идёт! А слово "сол" с мягким знаком.
Alexandr7153416 3 months ago
@Alexandr7153416 когда в россии будет это?
a576able 2 months ago
@a576able В России процент неучей значительно меньше, чем в Грузии.
Учите физику, ребята. Это гораздо интереснее лохотронов.
Alexandr7153416 2 months ago
The Kapanadze generator has some resonant elements, tuning could be your problem.
teslacult 3 months ago
This has been flagged as spam show
- This is a nice Video - but ...
- If you want to get the Magnetic-Generator Plans
- Go to Google and search for "Best Magnetic Generator Review"
- Click the First result (Skip the Advertisements)
subhankarwork 3 months ago
I think it is your spark gap. You are using a conductive loop instead of a direct gag. The loop is causing eddie currents and interfering with the constant intermission of magnetic flux. zyou can attenuate the spark gap with resistors but it would be a trial an error to attenuate (resonant frequency) the gap to perfection. Simple point to poinf would be better for tuning the system.
nannerin 5 months ago
Sorry, I don't really see why these equiment (MWO transformer, coils, capacitor, wires) needed to light a bulb connected to the outlet?
What is the intent / belief behind it?
scatterlief 6 months ago
Whats the name of that amp monitor when you measured the house circuit amps. Where do you get it from please.
FreePizza007 6 months ago
all details by this web site
.jnaudin.free.fr/kapagen/k32.gif
MrThair58 6 months ago
I actually have two grounds connected 30ft apart. This device is really lacking in it coil ratios as I've come to find out. Also, it seems trying to do this with 60HZ is a big mistake the test really needs to be done above 20,000HZ even better in the MHz range. This is according to Don Smith.
Captainloz 7 months ago
kapanadze is pronounced KAPA -- NOD--ZEE.
nice vid. just be careful of what your touching. High enough amps and that spark gap will reach out and bite ya through that lexan plastic.
Just out of curiosity, how did you come about by using such and such number of turns of wire & gauge? Was this calculated out from a step-up/step-down transformer equation, or copied from plans somewhere?
phantomlord71usa 7 months ago
i didnt see anything going to the earth for a ground reference. i thought the whole point of the Kapanadze generator was that it used the earth as a giant capacitor!
14jerseyboy56 7 months ago
@14jerseyboy56 hey ditto, I was just about to say "doesn't the kapagen need a wire connected to ground?". I checked out other videos and sure enough, the ground is needed. Some vids show people using two grounds.
toolejitful 7 months ago
Hey Nstockert, thanks for the advice, I'll give a try and post another video with it.
Cheers, Loz
Captainloz 11 months ago
hey ur spark gap on that cirlce spark gap u will be losing a tremendous amount of power. switch to a soild tungsten or stainless/steel straight {---- ----} like this. the cirlce spark gap cause a flux i power because it is trying to excape the spark gap before the 1mm gap. think of a jacobs ladder and how one side is always higher in the accent up the coil because it discharged first or found short gap then the official spark gap. let me know if this helped beacause it could be ur ground
nstockert 11 months ago