Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (150)

Sign In or Sign Up now to post a comment!
  • how can i do a fresh install to atom based laptop? is there any guide i have a snowleopard image and mac mini with SL

  • @no198720 See the Atom install steps in the website

  • @hackintoshindia i did it but no luck.no offense but for Atom the post is lil confusing.

  • @no198720 For atom based processors, you have to use different kernel thats all, if you have further queries post in the facebook discussion page of hackintosh-india

  • how did you get ther song

  • I have the Medion Akoya MD 97860 an need a Wirless kext :( can anybody help me?

  • how it you get the battery icon to show in the menubar

  • @matthewsummers880 If you are using VoodooBattery.kext, go to energy saver setting in system perference and check Show battery status in menu bar.

  • @matthewsummers880 i don't have that setting in my mac

  • @matthewsummers880 : did you use Voodoobattery.kext ?

  • @matthewsummers880 use voodoobattery.kext and enable battery in energy saver.

  • Now you can follow me in twitter personally to get all project related updates,@theindiandragon

  • one question on hacintosh i can u record, i throught u cant record on a hacintosh, but if u can, can u show me another it doesnt show u recording how do u do that.

  • one question on hacintosh i can u record, i throught u cant record on a hacintosh, but if u can, can u show me

  • Does this allow you to run iMovie, iTunes, ect..

  • thumbs up if ur indian

    

  • I have a couple used portable HP Pavilion dv5 2035la, AMD phenom x3 (P820 1.80 GHz), 4GB ram, ATI Radeon 4200 Mobile

  • hey,. bro., after typing -v, it shows loading darwin, and then after 3 seconds it restarts again.. and again and again,. same scenario,. what should i do,

    Specs:

    AMD Athlon x2 250

    Board: Biostar:

    Ram. 1500:

    videocard: builtin / it is in the board itself:

    all cards

    whats the problem please help me,.

  • Hey man. im trying to boot into the snow leopard cd using -x -v busratio=20 cpus=1 and -v -f and -v. i've tried almost everything but it doesnt boot!? Please could you help me.

  • @iBofter try -x -v cpus=1

    just remove the busratio=20 and you should be fine.

  • @ChromexDesigns doesn't work :(

  • @ChromexDesigns hmm i dont know i actually just installed mac osx 10.6.6i by hazzard on my advent 8112 netbook and its not in the compatibilty list and guess what it works.Except the wireless lan driver :(

    download it its good for intel based computers.

  • Guys,will respond to all your queries in few days....

  • i keep getting a kernal error

  • will i get problems with wifi or graphics card not working on my acer aspire laptop??

  • Hey. I want to install leopard on my laptop. I do not want to dual boot. I have an Intel pentium dual cpu t2390 @1.86ghz 1.7ghz and 2gb ram. Will this work and if i mess up can i just stick in my install disk. thx. =)

  • If anyone having problem with hackintosh just contact

  • nice tamil song congrats

  • IS Intel Pentium D Compatible??

  • @andrew23456able NAH FRIGGEN DUH IT IS AN OPERATING SYSTEM MADE!!! FOR INTEL

  • great music!!!

  • will this work on my laptop ??

    well its an alienware m15x :P

    core i7 720

    8 gb of ram

    nvidia gtx 260m graphics card...

    i don't know which motherboard i have xD

    can some1 answer me fast cuz i cant wait :P

  • Is toshiba A500-01W osx86 compatible?

  • great video mTE

    

  • will my data(on my hard disk,files like music games,software) saved on my computer will all be lost???plz tell me

  • @cj3ify : No, If you do it properly. It is always advised to take backup of very important files.

  • i have a problem guys its: Block 7908496 sectors 64

    please help!!!

  • @solofandek Check your DVD drive, is it a SATA connector?

  • Downloads will be fixed by tonight. Sorry for the inconvenience .

  • hackintoshindia please help me ya i hav downloaded mac osx with intel-amd based from torrent and installed cleanly.....after installing " please choose ur keyboard " message is displaying plz help me out i have customised during installion

    intel core 2 duo 2.6 ghz

    intel d945gcnl

    4 gb ddr2 ram

    500 gb sata hdd

    nvidia 9400 gt

    view sonic 19" lcd

    plz help me out yaar

  • @kkdsandeep3 If you can see the welcome screen then you have installed it right, proceed with post installation procedures.

  • does i movie itunes iwork etc work?

  • @Appleosoft :Yes it does.

  • Snowleopard files V 1.0.3 Released with updated VoodooHDA and special VoodooPS2 desktop kext.

  • New AMD/intel Pentium -4/D Snowleopard install method section added in the site.

  • Comment removed

  • Thanks for your help, what is the song?

  • @lifetroop You are welcome, songs are from Indian movies -

    The movies are Ayan(Tamil),Unnai pol orruvan(Tamil),Zeher(Hindi).

  • @hackintoshindia i knew it was tamil!! go tamil!! i know the language :)

  • Wooo lamhe Wooo rate :D ns song

    where i can get the mac os pls help

  • @evilofdarkness89 : Snow leopard Retail can be bought for 25$ and is really worth the buy.

  • Will this work on an AMD based system?

  • @malib0osted : Yes you should use a patched kernel, default OSX vannila kernel would not work for non intel core based processors.

  • @malib0osted : It will work, if you use a patched kernel. Follow AMD install tutorial from the website.

  • sir , i tried all solution possible ,but nothing is done with me , i installed the snow leo , but than when i start win7 installation he told me it is not possible to insall windows on EFI partiton ? what should i do plz ? i even do the oposit way (win than snow leo) but the same problem , he say osx can be install only on a GUID system ? what you think ?

  • @youssefqazwsx : Guess you meant to say, You need both Windows 7 and OSX in your machine. First  install Snowleopard in your PC patched for MBR[ better on first primary partition ] then go ahead with Windows7 install on another primary partition. You can boot both the OS with Chameleon Bootloader. If you have intel core2 processor use Hackintosh-India boot cd. Refer the guides, and post if you have further queries.

  • @hackintoshindia OSX could not be installed on a MBR partition format , i did that but when i come to place where i need to choese the partition to install in , he tell me OSX can be install only in a GUID HDD (by the way i use the original snow leopard 10.6 cd) :)

  • @youssefqazwsx : Yes you have to patch the Retail DVD fro MBR install, visit hackintosh-india[dot]com for the video on patching Snowleopard DVD for MBR install.

  • @hackintoshindia what im gonna say ? :) , thank you a lot i really appreciate your help

  • @youssefqazwsx :You are welcome :)

  • Site is up and running again, sorry if you were not able to access it few hours back.

  • I have frontech jil2225 webcam. But it's not being recognised. How to solve it? BTW, I am using 10.5.8, not snow leopard.

  • @fusionsun1991 Download mac cam from sourceforge and use it.

  • @hackintoshindia

    I downloaded, but it's also not detecting my webcam.

    Cam works correctly in windows.

  • @fusionsun1991 You have to request mac cam developers to include your cam in their next version, post your support request in their project page in source forge.

  • my wifi doesnt work on Sony Vaio Fw series is there a fix?

  • @mrappreviewer7 : What chip does your wifi has ? Search for kexts for it.

  • Hackintosh-India boot cd has been released, Now you can install Snowleopard in your PC using Retail DVD and boot cd without Leopard in a very simple way. Check out site hackintosh-india[dot]com for more information.

  • Snowleopard files have been updated with fully working Voodoo HDA and Preference Pane, based on Latest BSD drivers offering superior sound and voice quality. The preference pane settings are retained after restart. New VoodooHDA is also available for Leopard. Grab the files from Download's section of hackintosh-india[dot]com

  • Less Ads, No pop ups/unders, Frequent Updates,Downloads,Custom configurations,Guides and lot of fun at hackintosh-india[dwat]com

  • thala kalakara...

    it was very usefull...

  • @sayeumesh1 nandri macha :)

  • Alright, I kind of get the picture. I checked the site out and it seems that I need a running Mac computer to get things prepared. Is that true?

  • As far as snow leopard is concerned, it is better if you had a leopard hackintosh running, need not be a Mac. If you don't want a Leopard in your PC, you can install it to a temporary partition just to install snow leopard using it, Just give it a try and see.

  • You just need to download a patched .iso and thats all

  • Ok, one quick question for a noob. Ive never install any hackintosh version, but I attempt to do so in the near future. Say for every version of Hackintosh, where do you start off first to do the tweak to make the hard disk bootable? Im not talking about stepping up from 10.5, Im talking about a clean install. This confusing point prevent me from getting to know more about hackintosh. Please help.

  • Well you start off by booting the OSX install disc, If you are building a snow leopard from scratch,You need a core2 based system with retail snow leopard disc, and you should be able to boot it with bot132 cd, more guides on installing snow leo from scratch will updated soon on hackintosh-india website.

  • Please help I cant installing it because the first 5 seconds when the cd boots up my computer restarts over and over again.what do I do.Please help.Thanks

  • I think u meant the Snow leopard disc? If you had followed every step from the guide in the site and still could not boot the disc, the best way is to install leopard to a small partition and install snow leopard through leopard. Leopard installation guide can be found on the same site.

  • hey ive got leopard hackintosh if i download the iso of a retail disc

  • I dont have any friends with a mac, and I wanna get mac working before I go back to uni. Do you have any advice? Thanks.

  • A new method using boot DVD will be posted soon on the website, keep checking it out.

  • why dont you make a video?

  • thanks for you tutorial all working fine!and a little Tip for disk utility because mine did not work:should install BSD package that is on snow installtion disk.i can make updates everytime there is one?

  • yeah should install BSD package,will add to the guide , thanks.

  • Comment removed

  • I keep getting boot0: done message when my computer rebooting after installing os x

  • @mitenpat buy a mac

    really

    buy a fucking mac

  • I don't need to now with windows 7 :)

  • I wonder why it is so hard to install OS X on a PC even if they both use Intel CPU's and Nvidia/ATi Video cards.

  • Comment removed

  • Cause Apple made it harder :) Most people buy mac not for its hardware but for its OSX, so making it available for PC would hit apple's business.

  • Yeah, it would take a big time hit.

  • is it possible to use this method with an internal sata and give it 2 partitions...one for restore/install and one for target?

  • After I install, I boot with -v and get "still waiting for root device"

    so do you have any advice or anything that could help me?

  • Set the installed parition active, check out the site on how-to.

  • Guide on booting ext4 partitioned Linux using Chameleon2 RC3 has been updated in the website.

  • Shutdown/restart/sleep can be worked in Insipron 1520 with Nvidia 8600 GT by using ATI drivers,It will impact the quality of the graphics yet..shutdown/restart/sleep can be worked. A post on this will be made soon on the website.

  • yeah hackintosh india I followed your guide and installed snow leopard 10.6 successfully and also update to 10.6.1. But I updated to 10.6.2 but when i restarted and went back in it went to a black screen

    My computer is a dell inspiron 1520

    Please help I would really appreciate it

  • Hi mguard14,

    Do you use a graphics EFI string? If you do remove it, snow leo does not require a graphics string with chameleon.just use the com.boot.plist from snow leopard files found in the website.

  • @hackintoshindia

    Awesome work! i´ve got the same Laptop as you and follow this guide at all... but I can´t get graphics acceleration and no network. Can you help me?

  • @tentegas Use chameleon and Graphics enabler string in boot.plist

  • way to much work im sorr yim a noob i will wait for a distro or something o.o

  • No issues!! you may find it easy when you try :) Cheers!!

  • i hope this will work on a asus p5kpl-cm,quad core,8800gts nvidia

  • check out OSX86 HCL for compatibility list, I guess it works.

  • can you please tell me how to change my folder permission? i cannot change the distrubtion due to some permission.

  • Please be more specific, which permission do you want to change?

  • is this legal?

  • no but who gives a fuck

  • can you tell me what is this music ?? it's very nice :P

    thnx in advance

  • The music are from Indian films,

    Unnai Pol Oruvan (Tamil), Ayan (Tamil) and Zeher (Hindi).

  • @hackintoshindia cool tunes!

  • Hoping someone can help. What kext should I use for Inspiron 1520:

    Intel Core2Duo 2.2ghz (T7500)

    4GB RAM

    160GB 7200rpm

    Nvidia GEFORCE 8600M GT 256mb

    BCM440x 100Base-TX Fast Ethernet

    Intel Wireless WiFi Link 4965AGN

    SIGMATEL STAC 92XX C-Major HD Audio (82801H (ICH8 Family) HD Audio Controller)

    Truemobile 355 Bluetooth

  • the kexts from the site are updated regularly, the kexts are general, it will work for almost all. It has everything for inspiron 1520 except your wifi card.

  • I am trying to follow this guide. I'm at the part when replacing kexts in Extra folder. Video shows 8 files, but you only copy 7 of them. The download with the files has 11 files. Which ones do I use for my Inspiron 1520?

  • Anyone? Need help with what kexts to use.

    Do you have sleep/shutdown/restart working?

  • @jedis00 If u use Nvidia card, Sorry Sleep,Shutdown,Restart dosent work with 1520. Will post the fix on site when it is available.

  • @jedis00 Thats because the files are updated regularly, As I said before The kexts work perfectly on all PC including 1520. You can use all the kexts provided in the file.

  • Please HELP ! Can It work For XPS 1640? 2.53 Gz, 1GB 4670 video??

  • @albert2090 Yes it will, Cheers !!

  • how much memory dose snowleoperd take

  • @iFamousStar Apple says it needs 1GB of memory, Well if u have a 64 bit PC u can have 1GB or more.

  • Do you have any solutions no for sleep to work in dell inspiron 1520 snow leopard. Do you also have the soluton to restart / shutdown fix for it? Thanks hackintoshindia! your work is the best

  • @MrJosephvillamor There is no solution as of now, But will post it as soon as it is available. Cheers.

  • There is no Broadcom 440X driver in 64 bit. We are currently making one ourself,we will post it soon,for now u can boot in 32bit mode and use BCM440X driver from leopard,cheers!!.

  • Hah, I just used the old BCM440x installer pkg from an old 10.5.7 disc......

  • yeah,wait for the 64bit driver.

  • How do I get the NIC working using this method, I didn't enable, only my Air Port works. If you have any insight to this, Thanks.

  • There is no Broadcom 440X driver in 64 bit. We are currently making one ourself,we will post it soon,for now u can boot in 32bit mode and use BCM440X driver from leopard,cheers!!.

  • Everything works without sleep / shutdown / restart.

    How can I fix it?

  • Sleep/shutdown/restart dosent work cause of Nvidia card. We will post a fix as soon as it arrives.

  • I read the directions on the website but it's not specific enough for Inspiron 1520.

    Please detail how to install when already running an existing OS (vista/win7)

  • The tutorial is generalised for all hardwares. The files there would help you to run snow leopard in 1520 also. To install using WIN follow the install without leopard method.

  • Oh. This video says Dell 1520, so I thought you were going to give specific instructions for it.

  • Can't do the first 6 steps of your tutorial if I'm running Windows 7 since they have to be done in OSX.

  • Just convert one of your windows partitions to Journaled and use the install to a non GUID method, no big deal.

  • BTW, best guide I've found yet, all those other guides are a waste of time.

  • @ttebroc235 Thanks, I look forward to upload more guides which will benefit all.

  • Comment removed

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more