How To Create Custom LED Angel Eye Rings

[minhquanti]

too bad thats in my country they dont sell those rod clear like yours :(

[Jinuthatta]

what the name of the blind tube and what metal is made up the tube, it is glass or what

[brechen2002]

you should solder instead of just wrapping the copper wire around the led

[ditchplains7]

How did you mount them in your headlight housing?

[billyvesar]

@ditchplains7 You can do it with some double sided tape or silicone

[BlumekE]

has anyone been able to find these replacement wands? i went around to all local hardware stores and havent been able to find them.

[BlumekE]

also, where did you wire them to on your car?

[billyvesar]

@BlumekE I wired them to my city lights

[BlumekE]

hey, where did you buy your led's and wiring from?

[billyvesar]

@BlumekE Local hardware store

[xxHappyMeal84xx]

U are Awesome

[yamaharider149ify]

Hey I got da 5mm LED bulb and I was wondering on urs wat is da Intensity, Viewing Angle, FW Current and da FW Supply. If u can message me back that would be appreciated

[yamaharider149ify]

Sweet thanks

[yamaharider149ify]

K thanks... Umm where did u get da replacement wands?

[billyvesar]

@yamaharider149ify At my local hardware store

[yamaharider149ify]

Wat kind of bulbs did u use?...

[billyvesar]

@yamaharider149ify 5mm Led bulbs

[Xsanta01]

Are these bulbs 18000MCD?

[billyvesar]

@Xsanta01 I have no idea sir.

[superman4401]

I cant find any round plastic rod around here. U have any extra?

[billyvesar]

@superman4401 Nope

[gotshirts2ink]

Why does the package for the replacement wand say aluminum when it is plastic??

[JesusMuZicINC]

Now i made my lines deeper, like much deeper, is that ganna make a difference, or should i just start over?

[billyvesar]

@JesusMuZicINC Nope, no problem because the LEDs have a "stop plastic" so they wont go all the way to the hole. Also if they wont fit put some silicone on the back of the LED to secure it.

[JesusMuZicINC]

@billyvesar No i ment the lines that you make around the ring to the light go threw. I made mine like almost half way threw the rod.. is that too deep?

[billyvesar]

@JesusMuZicINC Its a bit deep but i think it wont cause any problems, only the light will be brighter on this line and less light will pass through but thats not a big problem

[highfeather1]

Not only is your finished angel eye light well done, but your video production is very clear, easy to follow and well laid-out. GOOD JOB!

[zedude02]

This is freaking awesome! Good work!

[Dillon1791]

If i used hot glue instead of tape to hole on weiring will it be fine too? Also, how did you mount in side your head lamps and how did you do your power supply once in the car? OH and what side of the cuts need to face forward? ex.) cut faceing out, cut facing in. Thanks, I'm doing this with my 04 TSX.

[Dillon1791]

If i used hot glue instead of tape to hole on weiring will it be fine too? Also, how did you mount in side your head lamps and how did you do your power supply once in the car? Thanks, I'm doing this with my 04 TSX.

[billyvesar]

@Dillon1791 About the hot glue i am pretty much sure that it will be fine. I mounted the angel eyes by putting the headlight in the oven to melt the silicone. There are plenty of videos around here so check them out. You can get the power from the parking lights so they will be on with the headlights. Use google to find a diagram for your car

[NoFearForever09]

hey champ was wondering how deep do the cuts need to be? need a reply asap

[billyvesar]

@NoFearForever09 The cuts need to be really light. Just to touch the drill to the ring only for the beam to go out of the ring

[90CorradoG60]

Cool bro i should do the same look at my angel lights.

[90CorradoG60]

Hey bro, what type of led did you use?

[billyvesar]

@90CorradoG60 I used 5mm white leds

[tripper252]

nyce video man,i gotta try an see how it comes out..

[dyzy1988]

local store?im from malaysia ><wanted to diy...looking forward finding material..

[dyzy1988]

where can get the material to do that?

[billyvesar]

@dyzy1988 At your local store

[vikkiandbradley07]

i was expecting a really bodge diy type thing but this is really good.

[palatkatuktuk]

Really professonal work!

Congratz!

[chicojoejoe]

hi there i have a cuestion about the angel lights. did you use any kind of resistor to link the led bulbs????

[muneeb8004]

@billy:thnx man,,i made those angles ,but from a door handle,similar to the replacement wand u used,coz here in pak i cudnt find the wand...but still the angles look kewlll

[dyno871006]

wanna ask something...what is replacement wand...??? i cant get the rod...

[billyvesar]

@dyno871006 Hmm.. really dont know :/

[CableGuyRyv]

@dyno871006 it's for mini-blinds. The wand is the rigid bit that you twist to adjust the angle of the blinds. Since they are plastic, they can break and these replacement wands are what Billy used in the video. Find them at stores that sell house stuff (like Home Depot)

[dyno871006]

wanna ask something...what is replacement wand...??? i cant get the rod...

[casketcrewchick]

wooooow. nice

[thatboyjuniorortiz]

Am done making it!!!... But now how do I install them to my cars headlight

[billyvesar]

@thatboyjuniorortiz You should go to a car electrician so you wont mess it up... because its a difficult job to do it yourself