12 inch CVR kickers 1 ohm

[blessthemic23]

Haha u suck. 04 audi a6 4,7 t. Quattro. 3 15" diamonds.  Suck itttt

[burkharddan1]

get some sound proofing material itll get rid of that annoying rattle

[Kintosol89]

Dam dat hit hard i use to have a mono brutus 1200 watt giving power to my 4ohm 15kicker cvrs

[brenndon123]

to bad u make the subs look bad in that Ugly Pontiac

My kickers bang in my Honda Civic turboed :P

[TechnicolorWrench]

@brenndon123 let me translate this "too bad those subs look bad in that ugly pontiac, my kickers bang in my fast grocery-getter honda civic pice of shit!"

[brenndon123]

@TechnicolorWrench lmao is that suppose to be an insult? sorry honda >pontiac 

[skulled4life]

im gettin 2 12"s CVR and i need 2 kno wht amp do ya'll recomend me get? i need something thts reasonably priced...i also gotta find 4 6.5"x9" speakers and 4 tweeters ..any suggetsions?

[Nickthepunk22]

Thats pretty awesome...I just need some extra cash and I'll get me a sub system goin..

[xDCTheGreatx]

I have 2 questions for you guy, please answer.

I'm buying dual 12" CVR's and I am going to wire them to 2 ohms with the zx750.1 kicker amp but should I get the dual 4Ohm CVRs version or the 2Ohm CVRs version?

And my other question is what gauge wireing should I use to hook all of this up?

PLEASE answer.

[RJacobs8907]

Hey man, hope this helps I have 2 cvr 12's with a kicker kx 1200.1 pushing them. They are the dual 4 ohm I highly recommend them, and I'm running 4 gauge wire throuought. It is perfect for my setup, hope this helped in some way

[paultakular]

get the 4 ohm CVR's if you are running two of them

i dont know if the zx750 is 1 ohm stable but if it is get the 2 ohm CVR because they will become 1 ohm and then the amp will give them a shit load of power

but if it is not 1 ohm stable then get the 4ohm because two 4 ohm subs become a 2 ohm load and you get more power at 2 ohms then 4, and of course you get more power at 1 ohm

and use 4 awg wiring

[fastlife1688]

the 750 will run at 1 ohm but you will blow it up after a while. . . check my vid i had 2 12's and 2 15's being pushed by a 750.1

[fastlife1688]

get the dual 2 ohm 15's or 12's and wire it to 2 ohms and use 4 gauge wire, dont get cheap wire though

[pablodonate]

i am running one of 4 ohms at 1 ohms & its hitting hard, but im running one 2000 watts performance teknique amp that its 2 ohmns stable

[abervintageman42]

if the amp is 1 ohm stable buy the dual 4 ohms, if not then buy the dual 2 ohms, i would rather wire 2 dual 4 ohms in at 1 ohm and keep the gain turned down, and use 4 guage wires for the amp power and ground and 12-10 guage from amp to subs

[thaonedatnigga]

as far as gauge u should run 0-4 no higher no lower and far as the ohms the cvr series allways run the best at 2 ohms not 1 not 4 not 8 but 2 ohms i had the cvrs but now have a solo x 10.000 watt sub running on kickers w.r amp it's expensive but way worth it

[dirtbikeryzz]

question for all u experts, why does my stereo screen flash when i crank the sound? i have nothing big in my car either, oh and nice vid but i mean wouldent u rather some good thump along with the music?

[willwreckniggas07]

cheap subs and amps can go down past 4-2 ohm he got dat good shit

[gatorgravy08]

aye how do i make everything at one ohm? bc i have 2 12 cvr 2-ohm a piece.

[NtubaS]

whats the name of the song?

[afroman655]

hypnotize- young jeezy

[progolfj]

wow this actually helps out allot thanks

[progolfj]

efficient as in louder?

[gatman18]

yea its waaay louder! i had 1 10" in a ported box and some ppl thought i had 2 10's or 2 12's

[progolfj]

is a ported box better?

[jorgemp1993]

how can I get with my 1 ohm cvr as well as yours

[maxnanabas09]

wire it to +,+ and to -,-

[maxnanabas09]

thx men i got my cvr wired @ 1 ohm i think the connection called parrallel connection my cvr hits really hard even on half volume

[trippinkev]

hahahahaaaaa my nigga dat rattlin lets u kno yo shit iz bangin.......i got a lanzar 1000watt/800rms it 2channel bridgeable amp....im bout 2 rewire my subs 2 1ohm cuz right now i think dey iz either 3 or 4

[maxnanabas09]

how can i do my cvr 4 ohm will be 1 ohm?

[rusaldinho]

hey man can i wire a dual 4ohm to 1 ohm? on my cvr 12

[germanator02]

get some 12 gauge speaker wire and connect + to + and - to - on the voice coils

[USMCfosho]

@germanator02

That would still only make it 2 ohms :)

[MrTravisWA]

No. a DVC CVR kicker 4 ohm rated sub can be wired to 2 ohm parallel, 8 ohm Series, or only wired to one voice coil at 4 ohm

[sheseverything20]

what song

[rusaldinho]

i have a kicker 12inch cvr which is better a sealed or ported box if i want hard hitting bass?

[popwarhomie]

ported. I went from sealed to ported with my cvr12 and it made a huge difference.

[bobote]

Anyone knows what amp would be better to run 2 of these 12" kicker CVRs? between:

1) Lanzar Vibe 1.8k

2) Lanzar Vibe 2.3kd

3) HIFONICS BXI1208D

4) HIFONICS BXI1206D

I dont have too much money so I need somethin good for the price but I dunno which one is better with these subs or if they will damage them or such.. Any recommendations? Should I get another amp not from the ones listed?

Thanks guys.

[XxXjos3phXxX]

Just ask mcgeex3 if you want clean sounding amps.

[XxXjos3phXxX]

He is going to upgrade to 3 15" kicker CVRs as soon as possible.

[germanator02]

just don't get lanzar. Either of the hifonics would be great

[bobote]

iight thanks for the tips mates :)

[JcArTeRiSpRo]

@bobote i personally LOVE HIFONICS amps and highly suggest either one i believe there the same amp one might be a year older though (not sure) but i suggest you upgrade your battery,alternator,wires(groun­ded) and youll get enough power why spend money on a nice system to not get enough power to them is what i say so the extra 300 dollars is well worth it for the upgrade just ebay a 165 amp alternator search ebay for 165 amp alt for your car you can get them for cheap!

[407kingpin]

@bobote

try a spl fx1-2000d..its like 175 new online..1 ohm stable..thatll do tha j.o.b

[XxXjos3phXxX]

Who cares about Dbs? Go for clean performance also. Look up mcgeex3's latest video, and you will see what I mean. He practically has the same system as you do at the moment.

[EzBrSHOT]

lol seal has better reposone to the bass and hit way harder. bandpass sounds good only when its n a hatchback or a truck not a car. band is better for the inside of ur car. i had my kickers n a seal box and bandpass box and a ported box i have to say sealed sound the best and its the shit. it hit real hard. i got a rockford fosgate amp that pound them bitches

[kskate91]

thats totaly awesome, i'm definity getting a second CVR when i start working.

[germanator02]

sweet man, get it ported....i just my new box and it sounds twice as loud as my sealed

[XxXjos3phXxX]

Who cares about Dbs? Go for clean performance also. Look up mcgeex3's latest video, and you will see what I mean. He practically has the same system as you do at the moment.

[JcArTeRiSpRo]

@germanator02 but it trully depends on how you like your bass if you want it distorted and not able to hit the lows accurately then sure SPL those subs up with your port but if you want some great SQ subs that have tight bass thats accurate and still loud then get sealed its all in your opinion

[kajornklin]

what song is this?

[germanator02]

song....... Hypnotize by Young Jeezy

[kletus05]

haha german, watch no hxc dancing in the living room its fkn funny

[CoLuMBuSnO1KiLa]

No dude u definitely want the ported box, this guy must like jazz or something (painlessguy) no person that likes rap would want a sealed box, its stupid, id actually want to put my shit in a bandpass

my question is:

how do u wire two of em down to 1 ohm and make it compatable with the box, and what is the rms of each speaker wired down to 1 ohm?

[germanator02]

1 ohm is compatible with any box, don't know why it wouldn't..... and 2nd  400rms each in a sealed box 300 rms is a ported

[painlessguy]

I would stick with the sealed box. They sound so much better. Ported boxes are for kids that want to be heard coming from 3 blocks away with there rides rattling, sounding like there car is going to fall apart. True bass isnt rattles. Sealed may get you more DB's but itll sound like crap. True audiophiles enjoy a sealed box with dynamatted trunk, not some guy that you can hear his trunk rattling coming from 3 blocks away. Rattle just kills the music, and that is what its all about, the music.

[painlessguy]

I meant ported will get you more DB's.

[MTXRides4Life]

sealed = sounds better 

Ported = louder, more rattle :P, more db

i would choose ported any day :)

[germanator02]

haha Adam!!!

[germanator02]

I was maby planning on switching to ported....would that make the trunk flex a lot more and be louder? People say that sealed is better for trunks. idn

[matckadocious]

let it rattle bro!!!lol thats what bass is supposed to do