@talknomore Thank you I'm just new in RC Heli, I dont know much about my WK 2801PRO TX but i can see under SWASH: there are selections: 3 servos 120 deg.; 2 servos 180 deg. and 1 servo normal..
@cabelyada Most helicopeters today uses 3 servos and at 120 degrees CCPM setup. You can tell what setup to use for your TX by looking at the swashplate on the helicopter, at the angle of the linkage connection. Helicopters like mini titan, TRex 450 SE, SA, Pro etc.. uses 120 CCPM, 3 servos setup.
I am using a JR9X2 TX. This type of CCPM heli usually requires at least a 6 channel TX to fly. If you want to use the laser 4 to fly, then you will need to have buy a CCPM mixer.
Is the Laser 6 from Hitec? I am not sure about the Laser 6 but pls make sure that it has the capability of CCPM mixing (heli mode) before you buy. For Hitec, we usually buy the Optic 6 (also 6 channel) model as it has heli / plane mode configuration options. Good luck! :)
Actually not much difference if you are doing simple forward flights like this. But there is a difference if you are doing hard 3D with it, as the cyclic response on the metal swashplate is a lot better.
Hi there, Can i use walkera 2801pro TX? Thanks
cabelyada 1 year ago
@cabelyada
Yes, you can use it as long as it has a CCPM (120 degrees) helicopter selection.
talknomore 1 year ago
@talknomore Thank you I'm just new in RC Heli, I dont know much about my WK 2801PRO TX but i can see under SWASH: there are selections: 3 servos 120 deg.; 2 servos 180 deg. and 1 servo normal..
cabelyada 1 year ago
@cabelyada Most helicopeters today uses 3 servos and at 120 degrees CCPM setup. You can tell what setup to use for your TX by looking at the swashplate on the helicopter, at the angle of the linkage connection. Helicopters like mini titan, TRex 450 SE, SA, Pro etc.. uses 120 CCPM, 3 servos setup.
talknomore 1 year ago
WHat tx are you using ?.I wanna buy but a mini titan but i wanna use a simple tx like laser 4.
rusyaidi4 2 years ago
I am using a JR9X2 TX. This type of CCPM heli usually requires at least a 6 channel TX to fly. If you want to use the laser 4 to fly, then you will need to have buy a CCPM mixer.
talknomore 2 years ago
Thanks but i think i buy a laser 6 its 6 channel tx
rusyaidi4 2 years ago
Is the Laser 6 from Hitec? I am not sure about the Laser 6 but pls make sure that it has the capability of CCPM mixing (heli mode) before you buy. For Hitec, we usually buy the Optic 6 (also 6 channel) model as it has heli / plane mode configuration options. Good luck! :)
talknomore 2 years ago
But if i use laser 4 and my gyro have ccpm mixer can right?
rusyaidi4 2 years ago
you can if you have the full metal head...
loads better imo
VestaxDJ 3 years ago
At the moment... I'm trying to do simple forward flight :-D. Thanks for your answer anyway
lelepilot 4 years ago
So, how does it feel it with the metal swash plate, can you feel the difference?
lelepilot 4 years ago
Actually not much difference if you are doing simple forward flights like this. But there is a difference if you are doing hard 3D with it, as the cyclic response on the metal swashplate is a lot better.
talknomore 4 years ago