How to flash a benq 360 drive to ixtreme LT Pt.1

[killersquirrel122]

idk i cant wait till team excuter relases the flashed xbox 360 slim

[killersquirrel122]

ya once the kinect dashbord update comes out will have to get all new shit like 1.3LT and freeboot 0.033 for jtags also i hope to do 10th lobbys on blackops by hotswapping but i just heard that they patched it so i guess where kinda fucked fora while

[steveonieia217]

@killersquirrel122 well honestly i dont really care much bout xbox anymore really

[mission156Pro]

@killersquirrel122 LT Should be ok for kinect what u have heard about the drive scan is a rumor

[killersquirrel122]

cant ixtreme 1.2 cant get deceted on xbl

[steveonieia217]

@killersquirrel122 i guess it prob can but it is not as detectable as the older ixtremes like ix1.61 but it doesnt matter anyway cause ms will prob find a way to detect all drives so it doesnt matter

[killer4life11]

LT 1.2 Is newer y didnt you use it

[steveonieia217]

@killer4life11 yes it is newer but overall it is the same thing, like between 1.1 and 1.2 no difference really. 1.61 and 1.1LT big difference, 1.61 is older and cant play every game

[TheSvinja]

i have a question about banning

can i only get banned if i play online (and am connected to xbox LIVE) during ban waves or if i play online today where there is no ban wave or anything??

[Swiper360]

I have 2x benq vad6038 drives and i need to extract the key and flash the new one some it plays games how would i do this ???

Do i just get the source target key in jungle flasher and then take and swap the drives with the new one and put the old source target key as the new target key ??

[steveonieia217]

@Swiper360 yeah u wood do the same steps except put the other drive key in and then hit spoof source to target and u shood be ready to go

[steveonieia217]

@mustangridah314 yes it should work ok

[Swiper360]

I just did a benq drive following this guide and it worked

BUT can you do it with a lite on drive the same way you did this oviously you don't click on unlock benq in jungle flasher etc

[steveonieia217]

@Swiper360 no using a lite on is totally different way to do it, im not 100% sure but you need to take apart the dvd drive and put something in there, but to answer your question no you can not do it the same way

[Sterling20073]

will this fuck my live up ?

[steveonieia217]

@Sterling20073 well by taking your flashed drive online is a chance your going to have to take, but most likely if you stay on the latest firmware you will be safe

[crazysk8ter1234]

also do you need to patch games you backed up

[steveonieia217]

@crazysk8ter1234 that is why i made a video on how to patch games lol

[crazysk8ter1234]

do you nee the vt6421 sate card because i have sata ports in my pc

[steveonieia217]

@crazysk8ter1234 you dont need the sata card but it is a compatible chipset for the 360 drives, but you can try if u have a sata cable already in your computer, im not honeslty sure becuase i never had a sata cable in the first place

[crazysk8ter1234]

finally a good tutorail

[iamunknown1988]

I know how to flash my 360 but I have a IBM computer with 2 sata ports and everything is recognized on my computer, but when Its actually time to upgrade my fw I don't notice my 360 after I put it in vendor mod..... What could be the problem????

[steveonieia217]

@iamunknown1988 it may be that you dont have a compatible chip set, you need a VIA 6421 sata card, you can find it on amazon

[iamunknown1988]

@steveonieia217 I have one of those already via vt6421 sata cards.

[steveonieia217]

@iamunknown1988 you could be putting it into mode b wrong, try it again and see if it works

[steveonieia217]

@iamunknown1988 link is in description

[steveonieia217]

@CrunchyDanny543 1.1 and 1.2 are overallt the same thing, except 1.2 reads the games better but it is not necessary to upgrade if your already on 1.1

[Kevonieia]

Lol. Is that Will Wigger Construction tapping?

[steveonieia217]

@Kevonieia yea thats the crew of WWC behind the camera

[steveonieia217]

@CbMods no problem man