Had that problem with an agricultural trailer. The bolts were a massive 37mm, we had to borrow a set of huge sockets with a wrench and a big pipe. It only came off after me and my brother both jumped on the end of the pipe.
I totally thought the truck was going to drive forward with the bar on the ground from the thumbnail pict!! now that i think about it. that might work. however a breakerbar and a quik jolt is my fav technique when over torqued . I find that the slower i remove the bolt the more the chance of breaking the bolt or nut whatever.
I never thought of doing anything like this... Id be afraid it would just snap the stud. I usually just get my torches out and heat the lug nut up till it is cherry red then try unloosening it. Normally works for me.
If your forced to take lugs off that way, they were tightened down way to tight!!! You especially have to watch out of shops that just Air gun them tight without even a torque bar. I hand tighten my wheels with a Torque Wrench. It's amazing how I can take them off by hand.
If your wheels aren't tightened correctly, you can in fact warp your brake rotors.
If you step on your brakes and the steering wheel starts to shake, that's the problem.
@JBDragon1 That could be one problem why you might have warped brakes but there are a multitude of things that can take place that would/could warp your brakes.
if your brakes are hot and you wash your car and spray cold water on them that can warp them.
if your brakes are cold and you get on the highway and have to slam your brakes on cold then that can also warp them. lots of ways.
this range rover has studs on the hub, not the style of the volkswagon and benz, and they shouldnt be torque to 120 to 140 ft/pounds, they should only be torqued to 100 ft/lb
Your video saved me a lot of headaches with a stubborn caliper bolt that no hammer or tool could loose. I was about ready to give up and I tried your technique and it worked like a charm!! Thank you very much!
I dont know what this robby844 is talking about, I've worked at a auto parts store for 12 years and they are called lug nuts. You can google (or any other search engine of your choice) it all day long and they are called lug nuts.
@mrboomer555 Maybe this idiot robby844 is talking about the wheel STUD which some people call bolts ( which is wrong) for its not even the part being talked about. I can see how some people get all upset when they try to talk their way out of their own ass ( robby844) Call your local parts store and ask for a wheel bolt lmfao
@mrboomer555 You may just not pay any attention to this video, this dumbass in here by the name robby844 is all mixed up and he will keep replying to your comments making him look like the right one
Is everyone seriously arguing about whether or not this model has wheel bolts or nuts? Just for the record its a Range Rover (not Land Rover) and it has wheel BOLTS, you know the things with a hexagonal head and a threaded shaft.
@daveylc well that puts a whole different look on it, robby844 been saying it was a land rover which they didnt have wheel bolts (unless it was an aftermarket item), which was my whole arguement with the kid. Thanks for mentioning its a range rover and not a land rover.
@daveylc Range Rover has wheel NUTS. Check from google "wheel nut" and "wheel bolt". Which on looks more familiar compared to Range Rover? If it has wheel bolts, then someone has replaced wheel hubs.
@mcmaddie thank you mcmaddie, I tried to say the same thing and robby844 basically called me a liar. Actualy, after doing some looking through the web, it seems that even the DOT has an issue with the WHEEL BOLTS
@robby844 Im laughing at you for you failed, they are called lug nuts, kepp cry and making these silly comments, my time here is done for I owned you in this conversation. Your future comments no matter how silly they are will be ignored. Thanks for the laughs (whispering saying they are called lug nuts )lol Im out oh in case you are that dumb to remember, I will ignore all your future post.
@fordwindsor351 you owned me? i proved you wrong on every comment you have sent me.everyone is laughing at you not me.they are called wheel bolts on this model of LR.nice try making yourself feel smarter tho.come back when you graduate middle school son and grow some hair on your balls
@robby844 You should hear her when Im fucking her, all I ask of her is to not call me your name. Just remember those lips that you kiss have been on my cock
@mrboomer555 wow really asshole.then why do they have the same fucking shit on both of them.now your gonna tell me that they are 2 different companies right?
@fordwindsor351 how did i fail when your dickhead ass cant even send a link to a persons page? oh wait i forgot i ummm how did you say it.oh yeah.......i disabled the ability for people to leave comments.
@fordwindsor351 so your whole fagoty argument over that they are nuts and you insisting they are is not proof enough? prove me wrong or your full of shit.
@robby844 well the person who has this video has it set up to not post links for there are many that call them lug nuts but go ahead and keep crying, hell, just call what ever parts store you want to and they will tell you the same
@robby844 cry baby cry, thats all you are doing for you failed. Why dont you go try your luck with someone that doesnt know nothing in the automobile world.
@fordwindsor351 like you asshole you know nothing about nothing.just stick to what you know NOTHING.wow how fucking reatrded is that excuse ? "well the person who has this video has it set up to not post links" wow you have no idea how to even post a link on youtube.thats sad.just like you dont know that you need to change the water in your tires every 150 miles.
Dont worry people about this robby844, he is just a young person trying to impress some with his words. Looking at his comments, its obvious that he wouldnt stand up to no one in real life but online, he is the biggest mother fucker you have ever met, lol. Just try to enjoy his words and for some, they are very funny. Youtube is full of his kind.
@fordwindsor351 wow really asshole cuz i knocked one of you assholes out just today and yes we were fighting over a landrover.he said nuts i said bolts and i went to my truck got a jack and my airgun took off the bolt and beat the fuck out of him with it.learn your fucking shit.btw your diaper smells you need to tell mommy to change it
@fordwindsor351 you are just like that outlawz fagot saying that he takes his shit off with a drill.what kind of bullshit is that? why dont you get on his case about his bs? or maybe your just a pussy like he is.
see people its people like outlawz that make the human race feel as dumb as they do.i proved him wrong on several accounts and he just ran away like a pussy.couldnt even try and prove me wrong.
@OUTLAWZPRODUCTIONZ an impact drill? wow are you full of shit,maybe your dickhead ass doesnt know what the fuck hes talking about.ive never in my 21 years on this pathetic earth seen ANY pit crew use a dewalt drill to do ANY work on cars.
@OUTLAWZPRODUCTIONZ no im not the asshole.YOU yes YOU started it by saying your "impact drill" can take cars rims off.especially a dewalt.dewalt is junk and made in mexico
@OUTLAWZPRODUCTIONZ really? i fail your the dickhead saying "impact drill".the more you say the more you look like a fucktard.just admit your wrong and say you have no idea what you are talking about.do you maybe mean just ever so slightly mean "electric impact wrench'? is that what you meant to say.even if it is you are still wrong because pits crews NEVER use electric ones for ANYTHING.
Oh this is getting old. Im done, your more stubborn than the wheel bolt on this video, im not going to reply anymore, your a waste of my time. If you reply your just admitting you want my dick... Nuff said. think before you reply..
@OUTLAWZPRODUCTIONZ no your not going to reply because you know you are full of shit and cant find an "impact drill" on the website.find it to prove me wrong dipshit.or just run away like the pussy you are.you shouldnt have even commented on this vid.should have just sat on your ass and played forza.cuz you know once you play that you know EVERYTHING about cars.
@robby844 You are the one full of shit and you are runningoff at the mouth to try to make it look like you are the right one, you fail at every comment you posts, its ok though, many people are stuck on stupid as in yourself and please, wipe your mouth again for you missed some of your bullshit. I am going to start wearing boots in here for robby844's shit is getting to be too much.
@fordwindsor351 really i have said no bullshit here? a LR uses bolts to hold the wheels on.you might wanna a bit of research before you tell people they are saying bullshit.cuz right now people are laughing at YOU not me.
after atching this and knowing how tools react to either loosing or breakin, id say this right here broke, if it didnt the tool would not of had the reaction shown.
@fordwindsor351 You can clearly see its a Range Rover.. Range rovers have 27mm bolts... And yes they did all come undone and NONE of them snapped.. How do I know? Because it was me doing it.
@daveylc nothing was said that it wasnt a range rover. I just said about the size (27mm) being that the lug nut would been seen after the tool dropped not to mention when yu play it frame by frame, you can see the broken lug nut fall with a small piece of the bolt still in it.
Some penetration oil and hammer tapping could have helped here. The pressure of the jack isn't a terrible idea if you don't have a air tool but if a nut is rusted or stuck, you have to shock it off or it will simply sheer the stud.
Yeah the axle nuts are VERY liable to break just as easily as the rusted lug nut is liable to come off like that. It's best to use a tiny amount of Vaseline on the lug threads.
Besides that, if you're going to use the jack method, it would be best to introduce a shock effect on the lug by hitting the socket with a hammer to loosen the grip of the rust.
a few years ago, i had a big Ford van with a flat tire, I couldn't break the lug nuts loose, I called a wrecker company, with the extra help, the lug nug refused to budge, I had it towed to an auto repair shop with a big air compressor...we finally got it off and I only spent $75.00 hahahahaha, I suspect some tire jockey put the lugs on with an air wrench....I mean that lug nut was stubborn...sometimes ya gotta do what ya gotta do..hahahaha
its actually caused by rust between the back of the rim and the face of the hub expanding and pushing the rim ( and therefore the wheel nuts ) tight against the threads making the nuts even tighter ( and it doesn't always happen evenly so it may only be a few nut ) or some bastard tightened the fuck out of em
why not just take the extended handle from the floor jack and put it on the end of the lug wrench for leverage? and it takes minimal arm pressure and its faster than jacking. just a hint. that's all
If you don't melt the wheel or tire. The best way to remove bolts is impact. Sustained torque breaks bolts, but a impact like impact guns breaks the rust. I use a mallet and solid 1 piece wrench.
If you put a little copper grease on the end of your bolts next time you want to take them off you shouldn't have this trouble,hope this helps....
blakes707 1 month ago in playlist Watch Later
Just put the wrench on the lug nut with the handle on the ground in front of the wheel and drive ahead.
TeaBagger5000 2 months ago
Had that problem with an agricultural trailer. The bolts were a massive 37mm, we had to borrow a set of huge sockets with a wrench and a big pipe. It only came off after me and my brother both jumped on the end of the pipe.
ruiferreira89 2 months ago
i think you broke the bolt
Dualshock21 2 months ago
This has been flagged as spam show
oh fuck thats smart!!!
loldrdr 4 months ago
I totally thought the truck was going to drive forward with the bar on the ground from the thumbnail pict!! now that i think about it. that might work. however a breakerbar and a quik jolt is my fav technique when over torqued . I find that the slower i remove the bolt the more the chance of breaking the bolt or nut whatever.
kreeperzulu4 4 months ago
hahaha i like the idea but probably you will brake the bar before nuts will get lose :D
KlasykaPolskiegoHH 4 months ago
I never thought of doing anything like this... Id be afraid it would just snap the stud. I usually just get my torches out and heat the lug nut up till it is cherry red then try unloosening it. Normally works for me.
yurifiero 4 months ago
If your forced to take lugs off that way, they were tightened down way to tight!!! You especially have to watch out of shops that just Air gun them tight without even a torque bar. I hand tighten my wheels with a Torque Wrench. It's amazing how I can take them off by hand.
If your wheels aren't tightened correctly, you can in fact warp your brake rotors.
If you step on your brakes and the steering wheel starts to shake, that's the problem.
JBDragon1 4 months ago
@JBDragon1 That could be one problem why you might have warped brakes but there are a multitude of things that can take place that would/could warp your brakes.
if your brakes are hot and you wash your car and spray cold water on them that can warp them.
if your brakes are cold and you get on the highway and have to slam your brakes on cold then that can also warp them. lots of ways.
kreeperzulu4 4 months ago
did tht snap or did the wrench just fall off
ASHLambretta 5 months ago
Clever!
maurotyler 5 months ago
just use a cheater pipe/bar...
This0is0pointless 6 months ago
My method is called Snap-On "Thunder Gun"
BikerBry 6 months ago
USAUHSHUSAHUSAHUHUASUHSAHUSAUH Those americans make me laught...
higormeisterlol 7 months ago
@higormeisterlol we make you what?
HexagramMan 5 months ago
@HexagramMan laugh*
higormeisterlol 5 months ago
@higormeisterlol lol your silly, you big silly goose!
HexagramMan 5 months ago
Didn't that just brake?
DR1ZERO 8 months ago
nice
elmucaro177 8 months ago
No thats how to break a stubborn wheel nut.
1939PlymouthRatRod 8 months ago
Wow, that is actually pretty awesome
nonamejoe56 8 months ago
You sir are creative!
TheZman77 9 months ago
'
use a long pipe and push up
bestamerica 10 months ago
smart.
KeepItRoostin658 10 months ago
another way is to get a long breaker bar and just pull forward a little
woolridgewilly 11 months ago
finally, a way for girls to change tires.
l337pwnage 11 months ago
Excellent!! Thanks for the video!!
davidattends 11 months ago
This guys smart, that was pretty creative and it worked really well. Dont call him dumb call the moron that torqued that nut to hell before him dumb.
nomkab 1 year ago
you wont see me doing that with my snap on breaker bar XD
automotiveDIY 1 year ago
i'ts me or it's kinda dangerous ? ... xD
khaliddrb1 1 year ago
I like your thinking. Bloody good idea that! :)
Eyeball1975 1 year ago
Thats actually pretty stupid, flying wrenchs' is never too good or you could just simply bend the wrench.
If you dont have an impact wrench put torque on the bolt with the normal wrench then hit it with a hammer. Works like a charm.
heyitstheo47 1 year ago
@heyitstheo47 If your so fucking good at removing bolts why are you looking at this video?
nunga000 1 year ago 9
@nunga000 Hahahahahaha. Good one.
watcbd 7 months ago
@heyitstheo47 ur mums a-hole works like a charm
ilikebeer 9 months ago
@ilikebeer hahahaha So fucking funny dude i can't stop laughing, you're a fucking genius.
heyitstheo47 9 months ago
Who the hell did them up so tight in the first place? King Kong? Chuck Norris?
digglyda 1 year ago
cheater pipe works good
CABLEMANAGER 1 year ago
Lug bolts are still a stupid idea. It's always easier to remove a frozen nut than to extract a frozen (sheared off by now) bolt.
Deckard439984r 1 year ago
this range rover has studs on the hub, not the style of the volkswagon and benz, and they shouldnt be torque to 120 to 140 ft/pounds, they should only be torqued to 100 ft/lb
93Roadkill 1 year ago
@93Roadkill LAND ROVER NOT RANGE ROVER.. SO BOLTS NOT NUTS... Why are there so many smart arses on Youtube?
daveylc 1 year ago 5
@daveylc Wow I finally met a pussy! Congrats sir! :D
bapechile7 1 year ago
@daveylc then why the fuck would you say its a rangerover in the description smart arse
ch0pper13 9 months ago
@daveylc
Bla bla bla, they say whatever they want cause they won't get punched in the face on youtube
brandon9966 6 months ago
smart very smart lol
biobain 1 year ago
Your video saved me a lot of headaches with a stubborn caliper bolt that no hammer or tool could loose. I was about ready to give up and I tried your technique and it worked like a charm!! Thank you very much!
twittersender 1 year ago
smart! hey u gotta do what u gotta do.
sancho721 1 year ago
damn pussies need a jack stop being so fuckin lazy ppl
chevydiesel350015 1 year ago
@chevydiesel350015 Eat a dick cunt
nunga000 1 year ago
@nunga000 go get ass raped then eat shit and die bitch
chevydiesel350015 1 year ago
9 people don't know how to use a jack
realtalk897 1 year ago
A (LUG) NUT screws onto a stud/lug, this car does not have studs/lugs.
daveylc 1 year ago
I dont know what this robby844 is talking about, I've worked at a auto parts store for 12 years and they are called lug nuts. You can google (or any other search engine of your choice) it all day long and they are called lug nuts.
mrboomer555 1 year ago
@mrboomer555 Maybe this idiot robby844 is talking about the wheel STUD which some people call bolts ( which is wrong) for its not even the part being talked about. I can see how some people get all upset when they try to talk their way out of their own ass ( robby844) Call your local parts store and ask for a wheel bolt lmfao
mrboomer555 1 year ago
@mrboomer555 You may just not pay any attention to this video, this dumbass in here by the name robby844 is all mixed up and he will keep replying to your comments making him look like the right one
fordwindsor351 1 year ago
@fordwindsor351 because i am right? or maybe cuyz you're wrong and wont admit it?
robby844 1 year ago
@mrboomer555 wow your how old? i dont need to ask for one because i have 5 of them right here on my desk.
robby844 1 year ago
@mrboomer555 whatever asshole.then why do both LR and RR have the same shit.you probably work at napa and thats a sad excuse for an auto parts store.
robby844 1 year ago
Is everyone seriously arguing about whether or not this model has wheel bolts or nuts? Just for the record its a Range Rover (not Land Rover) and it has wheel BOLTS, you know the things with a hexagonal head and a threaded shaft.
daveylc 1 year ago 4
@daveylc well that puts a whole different look on it, robby844 been saying it was a land rover which they didnt have wheel bolts (unless it was an aftermarket item), which was my whole arguement with the kid. Thanks for mentioning its a range rover and not a land rover.
fordwindsor351 1 year ago
@fordwindsor351 wow you two queers like to have violent buttsecks with each other.
robby844 1 year ago
@daveylc thats what ive been saying.and yes LR's do come with wheel bolts.
robby844 1 year ago
@daveylc Range Rover has wheel NUTS. Check from google "wheel nut" and "wheel bolt". Which on looks more familiar compared to Range Rover? If it has wheel bolts, then someone has replaced wheel hubs.
mcmaddie 1 year ago
@mcmaddie thank you mcmaddie, I tried to say the same thing and robby844 basically called me a liar. Actualy, after doing some looking through the web, it seems that even the DOT has an issue with the WHEEL BOLTS
fordwindsor351 1 year ago
look whos crying now you puss.you sit there and bitch worse than my fiancée when shes wrong
robby844 1 year ago
@robby844 Im laughing at you for you failed, they are called lug nuts, kepp cry and making these silly comments, my time here is done for I owned you in this conversation. Your future comments no matter how silly they are will be ignored. Thanks for the laughs (whispering saying they are called lug nuts )lol Im out oh in case you are that dumb to remember, I will ignore all your future post.
fordwindsor351 1 year ago
@fordwindsor351 you owned me? i proved you wrong on every comment you have sent me.everyone is laughing at you not me.they are called wheel bolts on this model of LR.nice try making yourself feel smarter tho.come back when you graduate middle school son and grow some hair on your balls
robby844 1 year ago
@robby844 You should hear her when Im fucking her, all I ask of her is to not call me your name. Just remember those lips that you kiss have been on my cock
fordwindsor351 1 year ago
@fordwindsor351 HAHAHAHA wow how fucking childish is that?
robby844 1 year ago
@robby844 seems that you have been pointed out being wrong as dave said its a range rover not a land rover which you been saying the whole time.
mrboomer555 1 year ago
@mrboomer555 wish you would of kept your mouth shut, now he will be in here running his useless mouth.
fordwindsor351 1 year ago
@fordwindsor351 as you would say LMAO
robby844 1 year ago
@mrboomer555 wow really asshole.then why do they have the same fucking shit on both of them.now your gonna tell me that they are 2 different companies right?
robby844 1 year ago
dont cry too much robby844, you will get dehydrated, you failed again
fordwindsor351 1 year ago
@fordwindsor351 how did i fail when your dickhead ass cant even send a link to a persons page? oh wait i forgot i ummm how did you say it.oh yeah.......i disabled the ability for people to leave comments.
robby844 1 year ago
@ robby844, you might want to check your headlight fluid, they are known to leak and your muffler belt needs to be replace every 50,000 miles lol
fordwindsor351 1 year ago
robby844 is one of the biggest cry babies I have ever seen
fordwindsor351 1 year ago
@fordwindsor351 crybaby because i proved your nigger ass wrong?
robby844 1 year ago
@robby844 no, you didnt, so for this I am waiting for more of your complaints
fordwindsor351 1 year ago
@fordwindsor351 so your whole fagoty argument over that they are nuts and you insisting they are is not proof enough? prove me wrong or your full of shit.
robby844 1 year ago
@robby844 well the person who has this video has it set up to not post links for there are many that call them lug nuts but go ahead and keep crying, hell, just call what ever parts store you want to and they will tell you the same
fordwindsor351 1 year ago
@robby844 cry baby cry, thats all you are doing for you failed. Why dont you go try your luck with someone that doesnt know nothing in the automobile world.
fordwindsor351 1 year ago
@fordwindsor351 like you asshole you know nothing about nothing.just stick to what you know NOTHING.wow how fucking reatrded is that excuse ? "well the person who has this video has it set up to not post links" wow you have no idea how to even post a link on youtube.thats sad.just like you dont know that you need to change the water in your tires every 150 miles.
robby844 1 year ago
@robby844 the link was sent to your page dummy
fordwindsor351 1 year ago
@robby844 there, just approve my comment on your page and copt and paste the link
fordwindsor351 1 year ago
Dont worry people about this robby844, he is just a young person trying to impress some with his words. Looking at his comments, its obvious that he wouldnt stand up to no one in real life but online, he is the biggest mother fucker you have ever met, lol. Just try to enjoy his words and for some, they are very funny. Youtube is full of his kind.
fordwindsor351 1 year ago
@fordwindsor351 wow really asshole cuz i knocked one of you assholes out just today and yes we were fighting over a landrover.he said nuts i said bolts and i went to my truck got a jack and my airgun took off the bolt and beat the fuck out of him with it.learn your fucking shit.btw your diaper smells you need to tell mommy to change it
robby844 1 year ago
@fordwindsor351 you are just like that outlawz fagot saying that he takes his shit off with a drill.what kind of bullshit is that? why dont you get on his case about his bs? or maybe your just a pussy like he is.
robby844 1 year ago
see people its people like outlawz that make the human race feel as dumb as they do.i proved him wrong on several accounts and he just ran away like a pussy.couldnt even try and prove me wrong.
robby844 1 year ago
@robby844
No im just tired of replying when you think you know everything... Its a waste of time...
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ awwwwwww sorry asshole trying to prove you wrong when you insist your right.
robby844 1 year ago
When i put on or take off the wheels on my car i always use my DeWalt Impact drill...
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ bullshit.
robby844 1 year ago
@robby844
How is that BS....
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ dewalt impact drill? what kind of bullshit is that? how are you gonna get over 100 foot pounds out of an impact drill?
robby844 1 year ago
Comment removed
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ an impact drill? wow are you full of shit,maybe your dickhead ass doesnt know what the fuck hes talking about.ive never in my 21 years on this pathetic earth seen ANY pit crew use a dewalt drill to do ANY work on cars.
robby844 1 year ago
dewalt.com/tools/hammerdrills--hammers-hammerdrills-dwd520k.aspx
robby844 1 year ago
@robby844
Not the Hammer Drill you retard. Impact and Hammer Drill are two totally drifferent drills.
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ so then find it on the website and prove me wrong asshole.you know nothing.
robby844 1 year ago
Comment removed
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ no im not the asshole.YOU yes YOU started it by saying your "impact drill" can take cars rims off.especially a dewalt.dewalt is junk and made in mexico
robby844 1 year ago
@OUTLAWZPRODUCTIONZ the link i just posted is the bullshit you have been spewing from your asshole.
robby844 1 year ago
Comment removed
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ really? i fail your the dickhead saying "impact drill".the more you say the more you look like a fucktard.just admit your wrong and say you have no idea what you are talking about.do you maybe mean just ever so slightly mean "electric impact wrench'? is that what you meant to say.even if it is you are still wrong because pits crews NEVER use electric ones for ANYTHING.
robby844 1 year ago
@robby844
Oh this is getting old. Im done, your more stubborn than the wheel bolt on this video, im not going to reply anymore, your a waste of my time. If you reply your just admitting you want my dick... Nuff said. think before you reply..
OUTLAWZPRODUCTIONZ 1 year ago
@OUTLAWZPRODUCTIONZ no your not going to reply because you know you are full of shit and cant find an "impact drill" on the website.find it to prove me wrong dipshit.or just run away like the pussy you are.you shouldnt have even commented on this vid.should have just sat on your ass and played forza.cuz you know once you play that you know EVERYTHING about cars.
robby844 1 year ago
@robby844 You are the one full of shit and you are runningoff at the mouth to try to make it look like you are the right one, you fail at every comment you posts, its ok though, many people are stuck on stupid as in yourself and please, wipe your mouth again for you missed some of your bullshit. I am going to start wearing boots in here for robby844's shit is getting to be too much.
fordwindsor351 1 year ago
@fordwindsor351 really i have said no bullshit here? a LR uses bolts to hold the wheels on.you might wanna a bit of research before you tell people they are saying bullshit.cuz right now people are laughing at YOU not me.
robby844 1 year ago
Owner it too fawking fail to use a cheater bar.
dieselwarriordotcom 1 year ago
that tire still has 1 month tred on it SPUNK BAG!!!!
kanebhoy3 1 year ago 8
@kanebhoy3 and u know this how
BiggRob1221 7 months ago
I thought you were going to drive forward. That would have worked too. :P
Totenhosen17 1 year ago
BEST, IDEA, EVER!
JuggaloAurora 1 year ago
i would like to see if reversing it would work lol
WHATSUPWATSON 1 year ago
i did that with a scissor jack to get a stubborn bolt on my car's suspension loose.
999benhonda 1 year ago
One Thing.
Havent You heard about an impact wrench?
pipproductions1 1 year ago
@pipproductions1 Yes..
The wheels had been done up with a 450 lb/ft truck gun, this is why they were so tight... The guy whos car it was had limited tools at his house.
daveylc 1 year ago
@daveylc please tell these people that they are BOLTS not NUTS
robby844 1 year ago
@robby844 In case you dont know, which it seems that way, nuts are the objects that turn on the bolt/s.
fordwindsor351 1 year ago
@fordwindsor351 in case you didnt notice on cars they are called studs and lugnuts.on LR's they are wheel bolts.get it right shithead
robby844 1 year ago
This has been flagged as spam show
@robby844 Go and cry for you are stuck on stupid
fordwindsor351 1 year ago
@daveylc who the hell tightens them that much they only need to be torqued to about 120 to 140 ft pounds of torque
sirkiller07 1 year ago
@pipproductions1 ya you would need an air compressor to have an impact or buy an expensive electric one. Everyone dosent just have an impact gun
fordfan855 1 year ago
after atching this and knowing how tools react to either loosing or breakin, id say this right here broke, if it didnt the tool would not of had the reaction shown.
mrboomer555 1 year ago
@mrboomer555 no it didnt break because some one was there as I was told lol
fordwindsor351 1 year ago
@mrboomer555 The broken bolt must have miraculously re-joined its self back together allowing me to re-use it. Amazing stuff!
daveylc 1 year ago
Brilliant idea... last time I had to loosen my car's wheel nuts I ended up jumping repeatedly on the end of the wrench :)
LMF5000 1 year ago
I dont care what size he said they are, it clearly broke off and if they were the size of 27 mm, the lu nut would of been seen.
fordwindsor351 1 year ago
@fordwindsor351 You can clearly see its a Range Rover.. Range rovers have 27mm bolts... And yes they did all come undone and NONE of them snapped.. How do I know? Because it was me doing it.
daveylc 1 year ago
@daveylc nothing was said that it wasnt a range rover. I just said about the size (27mm) being that the lug nut would been seen after the tool dropped not to mention when yu play it frame by frame, you can see the broken lug nut fall with a small piece of the bolt still in it.
fordwindsor351 1 year ago
@fordwindsor351 You are seeing things.
daveylc 1 year ago
@fordwindsor351 bud thats not broke get some glasses DUMBASS
protectoroffaith 1 year ago
@protectoroffaith nice try for a slam for you are like 3 months late shit for brains
fordwindsor351 1 year ago
@fordwindsor351 its not a lug nut now is it?
robby844 1 year ago
@robby844 wipe your mouth for there is still some bullshit on the side
fordwindsor351 1 year ago
@fordwindsor351 you have never seen a LR in your fucked up pathetic life have you? with what you just said you just proved me right
robby844 1 year ago
Just get a impact gun :O?
OneCompHelp 1 year ago
yeah wheel nuts can be like that hard as hell great idea duded
timawning 1 year ago
Thanks this was very helpful
copperpaint 1 year ago
this is nice, thanks !
TuscaniManiac 1 year ago
Or just drive forward
tberg323 1 year ago
WINNNNNN!!!!!!!
ccraig412 1 year ago
thumbs up
paulpushzeus 1 year ago
Rubber mallet works good too. As for using heat it expands metal duh.
Fire4FX 1 year ago
Some penetration oil and hammer tapping could have helped here. The pressure of the jack isn't a terrible idea if you don't have a air tool but if a nut is rusted or stuck, you have to shock it off or it will simply sheer the stud.
kmg501 2 years ago
lmao dumasses!
fastblack09 2 years ago
Wtf dude...you have no room.. this was a great idea...
proximxr 1 year ago
looks like you kinda broke the bolt with the nut.
ulykrane 2 years ago
next video will be how to remove snapped wheel bolt !!!!
blueeye1774 2 years ago 3
i know three feet of cheater bar would do the job, but we get the idea
dodgedart74 2 years ago
kinda stupid.
heat and maybe wax are the best.
Ibringthetruth1 2 years ago
attach it to a extension bar.
krazyhooligan 2 years ago
put it on and drive abit lol
drummer1212121212 2 years ago
guess he never heard of a tourch and air tools
KevinMillard68 2 years ago
look like he broke it off
6Camel6Finger6 2 years ago 10
I just kick it off
rukieishere 2 years ago
Dude thats hella smart
jorsem93 2 years ago
don't use a cheater bar for extra leverage the solution would be to get a longer wrench
psyduck731 2 years ago
Yeah the axle nuts are VERY liable to break just as easily as the rusted lug nut is liable to come off like that. It's best to use a tiny amount of Vaseline on the lug threads.
Besides that, if you're going to use the jack method, it would be best to introduce a shock effect on the lug by hitting the socket with a hammer to loosen the grip of the rust.
jgizzy 2 years ago
remember safety glasses eh
CdnSpecOps 2 years ago
a few years ago, i had a big Ford van with a flat tire, I couldn't break the lug nuts loose, I called a wrecker company, with the extra help, the lug nug refused to budge, I had it towed to an auto repair shop with a big air compressor...we finally got it off and I only spent $75.00 hahahahaha, I suspect some tire jockey put the lugs on with an air wrench....I mean that lug nut was stubborn...sometimes ya gotta do what ya gotta do..hahahaha
chihene 2 years ago
its actually caused by rust between the back of the rim and the face of the hub expanding and pushing the rim ( and therefore the wheel nuts ) tight against the threads making the nuts even tighter ( and it doesn't always happen evenly so it may only be a few nut ) or some bastard tightened the fuck out of em
CdnSpecOps 2 years ago
ya got ripped off
tsohmas 2 years ago
dude thats amazing
thecardrawer10 2 years ago
I've broken bolts right off just using my hands. I can't imagine what a jack would do.
abacab87 2 years ago 7
why not just take the extended handle from the floor jack and put it on the end of the lug wrench for leverage? and it takes minimal arm pressure and its faster than jacking. just a hint. that's all
brownmachine6969 2 years ago
Two of us stood on the breaker bar, I doubt adding an extra foot to it would have helped ;)
daveylc 2 years ago
its actualy about 21/2 to 3 feet ofleverage
from the floor jack handle.
but its cool, you got the job done and thats what matters.
brownmachine6969 2 years ago
it's true what he says
needed to put another tyre on a trailer of a tractor, the bolts where on there for about 15-20 years i think so they where stuck as hell.
used a hollow (but strong) bar of 2 meters to put on the lug wrench, still hard but it worked :-)
this is also a nice way to try if you don't have a bar close, never would have tought about it :D
jan585 1 year ago
retarded looks like a nice way to wreck your axle nuts
soudyman 2 years ago
Great idea, love it :)
Garen15 2 years ago
ausome......idea
nolatoolguy 2 years ago
haha thats what I did
rebeltshead 2 years ago
No doubt, but I have personal reservations about O/A torches near my aluminum rims.
x65535x 2 years ago
If you don't melt the wheel or tire. The best way to remove bolts is impact. Sustained torque breaks bolts, but a impact like impact guns breaks the rust. I use a mallet and solid 1 piece wrench.
x65535x 2 years ago
Next video: how to remove a broken bolt hahahaha
poderiasereste 2 years ago
its broke Ha, ha, ha,ha DUMBASS!!!! LOL..
KennethgangstaKane 2 years ago
None of the bolts broke.
daveylc 2 years ago