Shot shell reload , Lee Load-All Shotgun cartrages

[NragedXX]

Best thing to me is it appears to be very portable, not bulky and able to pack without alot of stress on body to lug about1 Thank you for this info!!!!!!!!

[MrGT27]

Cheery' O ode chap!

[keithpestkill]

nice vid mate makes it look simples even for me  it aint rockit tech thats why we can do it

k

[TheRemington887]

I ment to say have not hace

[TheRemington887]

I like the mec 600 jr. My self because you dont have to put a resizeing die on and off It is made onto the prime remover so u dont hace to worry with it but thats just me. Nice reloader though dude!

[mrtreebus]

@TheRemington887 Well you get what you pay for ;-)

[jntree]

nice vid fella plain and simple, what load was you using??

[mrtreebus]

@jntree 32g load No 7shot

[bobcrawman34]

Why is it every time i look up a reloading vid its always an aussie...what the hell

[mrtreebus]

@bobcrawman34 I know, try "reloading shot shells" in your search

[sdt11670]

It's hard to tell, but it looks like you have a washer under you 6 point crimp starter. If it is a washer do you have it glued in place? On my old original loadall silver base model i have to use washers under the crimp starters. This version didn't have powder bushings and used an internal shot bushing in the charge bars. In my loadall II's there is no need to place washer under the starters and they load a bit faster as you don't have to guide the shell into the dies,but I prefer the old ones.

[mrtreebus]

@sdt11670

Yep has a washer ,and glued ;-)

I had to buy a new set of bushings from the Lee Loadall 2 .

[mrtreebus]

I get all my parts (thereof) from My local gun shop, It would cost so much to have Powder and shot posted!

Powder/Primers would incur a Danger HAZMAT charge of £30 plus Powder an the lead well........ HEAVY!

Look at your load book and goto yr gun shop with a shopping list, they may get them with the next order?

[duncanfr11]

Where do you get all you supplies .e.g. Power, shot, wads, primers?

[mrtreebus]

@duncanfr11 I get all my parts (thereof) from My local gun shop, It would cost so much to have Powder and shot posted!

Powder/Primers would incur a Danger HAZMAT charge of £30 plus Powder an the lead well........ HEAVY!

Look at your load book and goto yr gun shop with a shopping list, they may get them with the next order?

[ANGRYSECTI0N8]

Do you ever make your own shot mixes?  Say, No4 shot with 3 00Buck?

[Grierkid]

Just a quick question! To buy the primers and powder do you have to have a license? i know you do to have the shotgun but was wondering about those things. thanks :)

[mrtreebus]

@Grierkid

Yes mate you will need a license for anything that can go BANG!

[Rhyno430]

@mrtreebus, I don't know were you live but i have never been asked for anything other then a drivers license.

[pqlamzhunter]

where did you get the lead shots

[Doctorchops]

I think the machine in this video is a little dated - the newer ones are a little different than this one [from what I've seen]. Don't actually own one, but I think the newer ones have a primer feeder you can attach.

[mrtreebus]

@Doctorchops

Yep your right , but they jam and you end up loading the primer by hand!

Dated; yes

Efective; YES

Need to buy a new one : NO

It's all about keeping the cost down ;-)

[1998catman]

great video

[mrtreebus]

@1998catman

Thankis mate;-)

[mrtreebus]

New Video this week all about loading to the book!

Shot powder primers etc!

SUBSRIBE FOR MORE UPDATES!

[nounouuu]

Hi,

can you change the amount of powder? Put more powder for goose or duck hunting or it's just for target load?

thank's

[stereonut001]

"How you doin' Youtubers?" Heh. I remember that person's video, but he took it down. I wonder why?

Cool video! 5/5 *****

[ARKSOLDIER7]

what about slugs or buck shot?

[weimer495]

can you change the amount of powder and shot you put in the shell? is there an adjustment on the reloader?

[bidbolla]

you see where he slides it for powder or shot theres 2 screws un svrew tehm then you put in to bowl like things that are plastic for powder it will say like 105 or 110 and for shot like 7.8 and stuff like that

[Mrshotshell]

that's a rip off

[mrtreebus]

Well it did cost me £45, but as you say yr not on a budget, I will sell it to you for £300 lmao

[Naturepheonix]

Lee loaders seem to be fairly good.

[marshallspikebanana]

Does it have a die to crimp a slug round?

[mrtreebus]

marshallspikebanana :

No that has to be done by hand!

[keg77105]

whats the best shell to reload? and how many times can it be used?

[mrtreebus]

keg77105

What load do you want ?

What are you shooting at ?

What distance are you after?

How fast do you want it to get there ?

What spread do you want ?

What size shot do you have ?

The list goes on!

Get a reloading book to explain all of this !

[prickskytte]

Nice video , i'll think i go for the Dillon SL900.

[Slepho]

Have you ever had any problems with the final crimp? coz i have

[mrtreebus]

Slepho

Have you stuck to resp. out of a book or are you using any wad with any hull and any weight ?

[gunnertrip]

Top vid thanks ,

Can you tell me where I can get this kit from ?

[TheMarkjefferson]

hi could you tell me where i can find a good supplier of powder shot wads etc

mark

[jbuist]

Bought a Lee Load-All II this week because your video made it look so easy. Got it installed this afternoon and as soon as I get some components I'll be loading up my own trap loads!

[pezman1963]

I have loaded over 30,000 rounds on my Lee Load All II

It converts to to 16ga or 20 ga easily.

[vegas2004]

Im intrested in reloading too and am curious whether it can cope with fibre wads or is it just plastic? Also,how does it compare money wise to shop bought cartridges after you've bought the machine,powder,shot etc.

Does it make any difference to how high the brass is with reloading cos i tend to buy the cheapest 32gm 6's the gunshop has in at time which are always depending on brand either 8mm or 10mm.

[Mrshotshell]

for me it costs about .50 cents a round

[xiaemperor]

have you loaded steel with the lee? I am looking into loading steel for hunting and I am trying to pick the right machine to go with. what are your feeling on the Mec steelmaster?

[akkrauta]

Cool video showing the ease of Lee's Load-All reloader. How's it work with larger shot (i.e. BB, 1, 2, 3, 4, and buck sizes)

[mrtreebus]

All shot bigger than #2 you would place inside the hull by hand.

As for BB's you would only get about 6 in a hull- so if you can count to 6 you'll be ok ;-) lol

[akkrauta]

Very good, I guess I didn't think of that. Thanks.

[andogame]

Hey there,

You can fit about 80 or so BB's in a 1 1/4 wad you must be thinking or buck shot , can only fit 9 " 00 " buck shot pallets in a shellshot at once.

[Ranchen69ers]

I bought a Lee Load All shotgun shell reloader. I have not ever reloaded shotgun shells but have reloaded thousands of rounds of rifle. So I thought I would see who said what on You Tube. Ran in to this and its been some what helpfull to me. Thanks.

[mrtreebus]

Good, thats why i put it on youtube, as there is no other LEE-LOAD-ALL on the tube!

good luck ;-)

[TheClemsonDude]

I just got my Lee Load All today! I really like it, but I don't have one of the powder/shot ratio sheets. Can you please tell me which powder/shot bushings you use for that #6 load? I'll be loading with the "green dot" powder and standard #6 lead shot. Thanks.

[mrtreebus]

I need to know the case and primer, you have also!

but if you go onto your powder web site they will have the data for your green dot.

[TheClemsonDude]

Oh, great, thanks!! I found the charge tables on their site and printed it out!! It seems to work great. I'm gonna experiment with the different charge/load options and see which ones work the best. Thanks again for all your input, I'm really happy with the Lee load all I got.

[mrtreebus]

Gr8 nice one , just make sure you don't use a HOT primer with a HOT powder, or MILD primer with MILD powder!

You need to use a Mild primer with hot powder and hot primer with mild or slower powder. the chart may say this ?

good luck mate ;-)

[TheClemsonDude]

No, the chart didn't say anything about it but I'm just using the standard Winchester primers and the Green Dot smokeless shotshell powder, and the guy at the gun shop said that would be a fine combination. I'll look into it though before I reload any more, thanks for the tip.

[TheClemsonDude]

Good info.. I'm thinking about getting one of these but I'm new to reloading shells.. Do you like this machine? had any problems with it?

[mrtreebus]

Works well for me , I only load 50 pr week ish.

[TheClemsonDude]

Cool, that's probably about what I'd use it for too so I think I'll go ahead and get one. Thanks a lot!

[mrtreebus]

Try: Clay and Game. co. uk.

[magnus800]

Could you tell me where you get your reloading supplies from, I am from the UK and I cannot get a reliable supplier.