Added: 1 year ago
From: patofiaro
Views: 42,648
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (43)

Sign In or Sign Up now to post a comment!
  • IT'S WORKING!!!

    I just tried on my LG 32LD465. I used only cell phone, and connected the IR LED to the earphone audio out jack, and play the mp3 sound on the phone.

    Thank You so much.

  • Worked like a charm, thanks for this! Also, If you have a 3.55mm (headphone jack) to RCA (Red and white cable) you can just touch them to the ends of the LED. Also, you can open a remote, take the batteries out and just touch the red and white to the opened unharmed remotes LED and it will work. Thats what I did, thanks again!

  • I have the Zenith (LG) Z50PT320 and it works. But there is no selection to activate the USB or hack it... to bad for me its just a usless firmware I guess.

  • perfect en cheap way to hack lg without buy a universal remote...

  • Hi..just wondering whether anyone has a valid link for this file cuz apparently the given link for downloading the wav file is broken...

  • What I did wrong?? Didnt work for me...

    See my pictures...

    ht tp :// desmond.imageshack . us/Himg7/scaled.php?server=7&f­ilename=01122011007o.jpg&res=m­edium

    h tt p:// desmond.imageshack .us/Himg841/scaled.php?server=­841&filename=01122011006.jpg&r­es=medium

  • Doskonały sposób i niezawodny na telewizorach LG, na moim LD420 poszło za pierwszym razem. Diodę wyłamałem ze starego pilota z mini wieży, kabelek z jackiem 3,5 akurat miałem. Bez lutowania i innych pierdół, przytrzymałem w ręku i podszedłem do telewizora reszta opisana jest na forach.

  • It worked on my 22LD350. I connect my pc to my stereo amplifier and then i connect the led in one of the outpout for the speakers (not in headspeaker outpout). In that way i had maximum power to the led and i didn't need to put it near to my tv. It worked from 2m distance!! Se euxaristw file m!! Eisai apaixtos!!

  • It worked on my 32LD450. You really must set the volume high.

  • Please, is it compatible with 42Ld450?

    Or has anyone tried it on 42Ld450?

  • @mipetre Thanks, it should work

  • Baszátok meg ez tényleg mükődik!!! kiprobáltam Zsír!

  • Does anyone have the wav file for resetting to factory default? The code is 00016.

  • κανω ολα τα βηματα σωστα ενα προς ενα αλλα δεν μου εμφανιζεται το μενου...μπορει κανεις να με βοηθησει???

    

  • It really works. Thank you! 

  • thanks poli kalo! meta apo kana 2oro ta katafera kego!

    se LG32LF2510 ... kai mou epaikse AVI-MP4 files....MKV oxi...exei kaneis paromoia kai tou doulepsan ta mkv mipos?

    P.S .. ego me mini netbook xoris dinato genika ixo to ekana!

    apla parte kai kopste ena kalodio ixou(aspro-kokkino) kai sindeste pano ena mini jack! kai tha ginei amesos...testarismeno 100%

  • you are blocked this video and ı cant watch it fuck youtube.......................­..............................­......fuck your fat and sales asssssssssssssssssssssssssssss­ssssssssssssssssssssssssssssss­ssssssssssssssssssssssssssssss­sssssssssss

  • @ozgurman1

    Use proxy server neighbor to watch it..

  • Worked for me as well.

    I couldn't get it to work using the audio output of my laptop even with volume turned all the way up. I had to connect the LED to a desktop PC.

  • Very great method, it works flawlessly and easily but if the sound is weak just make it louder and connect the cables tight. Thanx and best regards from Turkey...

  • Works good thanks :)

  • Για να λυθούν τυχόν απορίες.Δεν παίζει ρόλο η πολικότητα του led.Μιλάω σχετικά με το που[Ground(-) ή Signal(+)] θα συνδέσετε την Άνοδο(Α) και Κάθοδο(Κ) του led.Αν χρησιμοποιήσετε stereo καλώδιο και όχι mono, δουλεύει και στα 2 κανάλια (left & right).Σημαντικό ρόλο η ισχύς του ήχου.Θα πρέπει η συχνότητα που αναπαράγεται να είναι αρκετά ενισχυμένη.Ακόμη καλό είναι να πλησιάσετε το led πολύ κοντά στο δέκτη της TV, σχεδόν κολλημένο επάνω της.Το equilazer του μέσου αναπαραγωγής να είναι Flat.

  • Και ποια η εξηγηση γιαυτό;

  • Thanks guys it worked like a charm, USB working fine, divx, mkv, everything...

    I have truble only becouse a laptop output was to low, so i hade to play that file trough a stereo system with headphone output much louder then a laptop.

  • το δοκιμαζω σε μια lg lh3000. εχω τοποθετησει διπλα στην tv και ενα κινητο με ανοιχτη την καμερα ωστε να βλεπω εαν αναβει ή οχι το led. Πραγματι αναβει αλλά με οποιοδηποτε συνδυασμο. Ωστοσο το λινκ που δινεις για τους ηχους wav εχουν χρονο 00000. πως θα τους αναπαραγω. συνεχεια σε επαναληψη?

  • file emena den leitourgeise to kolpo to dokimasa me 2 eidh kalwdion olous tous tropous .mhpws pezei rolo to leitourgiko??????

  • @phantom2222222

    Τέρμα την ένταση δοκίμασε,σε ένα φιλαράκι δεν δούλευε λόγω έντασης το ίδιο καλώδιο που σε εμένα δούλεψε με την μία,αν δεις το βίντεο έχω συνδεμένο τον ήχο του pc σε στερεοφωνικό και εκεί το led για να έχω όση ένταση θέλω.

  • ποιον ειναι ο συνδυασμος των καλωδιων?

  • @TOLISEE80

    Φίλε μου δοκίμασε το γυμνό(κοινό καλώδιο και για τα δύο κανάλια ήχου) και με ένα άλλο,αν δεν δουλέψει,δοκίμασε το επόμενο.Και να μην ξεχάσω την ένταση όσο πιο δυνατά μπορείς.

  • @patofiaro

    χμμμ... θα ενωσω τα 2 γυμνα σε ενα? θα ενωσω το καθε γυμνο με το χρωματιστο καλωδιο?

  • @TOLISEE80

    Εμένα είχε ένα γυμνό καλώδιο και δύο μονωμένα,ο συνδυασμός ήταν το γυμνό με ένα από τα μονωμένα(το οποίο το βρήκα τυχαία μετά από δοκιμή),δοκιμασε τους συνδυασμούς μη φοβάσαι δεν πρόκειται να χαλάσει τίποτα.Είναι αρκετά απλό.

  • φιλαρακι δουλεψε σε 42ld550....

    χιλια ευχαριστω...

    it worked on 42ld550...

    works fine...

  • Ok i have the cable but there are 2 wires on the one side and 2 on the other. What should i do ? how to connect the led?

  • @ordanc

    Try the one without insulation and try the other two combinations.

    Its easy and it works

  • @ordanc never mind. I did it, thanks

  • @ordanc never mind. I did it, thanks. It works perfectly

  • is this really possible.

    I have LGld450. will it work on this model?

  • How do you conected that ir diode? Plus from jack to a plus on diode or what?

  • @Stexman2

    I've tried both the combinations on the ir connection,the second one worked.

    Its really easy.Just try it.

    Try to play the sound close to your tv ir "eye" and turn the sound level loud.

  • @Stexman2 Every cable for headphones has 2 wires. Each wire has 2 wires by itself. So you pick one of the the 2 wires, and that wire will separate in two wires(you'll see that there are 2 inside insulated by cable) afterward you turn on the music and that is all.

  • Megale mamises! Se 1 lepto htan etoimo!

    Best hack ever! 1 min solution!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more