@TheClayHarrison If your model is unpainted, then simply use the gundam markers (the fine point one's) to line in between panels. use a q-tip to clean off excess. Apply a flat top coat and voila, gundam modeling, cheap and easy.
Black marker for everything, Grey for white, Brown for red and yellow.
Aside from the bizarre purple color for the weapons, that's actually looking pretty decent for a 90's kit. Perhaps that dark green color would have been a better pick for the weapon plates?
@BlitzkriegOmega Technically he was at the start of the OVA when he dueled Heero in the atmosphere, but doesn't play a role after that, but remember Wu Fei changes sides about 3/4 of the way through the movie. These guys were fighting the Gundams and Zechs all the way through the movie
@boeingnz Really, the Heavyarm's gatling guns aren't purple? I figured they were being lazy, and just made the purple plates at the same time, to save money. Thanks for letting us know!
@rrobbert184 Heavyarms gatling gun is blue, and this guys is a sand brown color, his beam gun is black. Your's is light purple for some reason... i don't know why. I have mine sitting in a box here so i checked to make sure i was right.
@crandor6 They're all Gundam plastic models. I just use it in the broad sense. If I was revieiwng a Cobra Commander, I'd still call him a GI Joe on occasion.
that's an awesome model and a great channel! Mine didn't come with white parts but yellow so i had to paint it also be careful with the thrusters the internal plastic in one of mine disintegrated and is being held together with blue-tac (i know, i suck). You might consider using a matte clear coat, i used it on mine and it looks 100 times better.
Never got around to getting this kit, but I did snag up the 1/100 HG Nataku and Epyon. Not bad kits back then but they have a ton of problems now. Nataku won't even stand up. lol. Nice looking serpent though. Really takes me back.
dude. if you can pronounce Treize, you can pronounce Kushrenada. just sound it out, and if worse comes to worse you can look it up.
mcfeliz200 1 month ago
Treize Khushrenada
Kush-ray-na-da.
cyclone0001 1 month ago
only have the 1/144 HG of this...seems like there is no brown on the 1/100 as the 1/144 counterpart has brown on the model
TommyTheToyReviewer 1 month ago
his leg looks alot like a dom lol.
123asd1 1 month ago
may i ask a question.......
what is with that zaku cup and where did u get it i want one
ElecMaster13 1 month ago
Comment removed
ElecMaster13 1 month ago
its looks good, wish they made a MG of this guy
GundamSwag 1 month ago
90s or not, hg is suppose to have hallow parts
blvk3 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
man this kit looks cheap, how much did you pay for it?
brigbjones 1 month ago
@brigbjones
It IS a 1990s HG kit...
Omegamegamanzx 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
@Omegamegamanzx But it costs as much as a HGUC ReZel or HG 00 Raiser. (Other 1/100 HGs were cheaper) I guess it's because it has more plastic?
detectiveconan996 1 month ago
Im loving these old skool reveiws.
DOOM100010001 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
I'm so glad rrobbert184 picked this old kit for a review
gluteusMAXlMUS 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
Well. It's what I expected. I still want it, but it has less articulation than I had hoped... Ah well I'll still get it.
7kiku7honda7japan 1 month ago
can you make a video on how to line models? i want to do it, but i want to do it right so i dont ruin my models
TheClayHarrison 1 month ago
@TheClayHarrison If your model is unpainted, then simply use the gundam markers (the fine point one's) to line in between panels. use a q-tip to clean off excess. Apply a flat top coat and voila, gundam modeling, cheap and easy.
Black marker for everything, Grey for white, Brown for red and yellow.
shadowblack1987 1 month ago
@shadowblack1987 Sounds just right! Best $6 (3 lining markers) anyone lazy can spend on Gundams.
rrobbert184 1 month ago
@rrobbert184 I haven't done that in a long time thought. I have been airbrushing and using different paints to do the panel lining for years now.
shadowblack1987 1 month ago
@BikerTrashWolf That's why amazon is the way to go or robot4less
CaramellDancerElite 1 month ago
I bought this kit off ebay
it came prebuilt. poorly. i was mad.
BikerTrashWolf 1 month ago
This surely seems to be little better than model kits from tv-series thanks to not having polycap connection below the shoulder.
Mecha82 1 month ago
i like these older models because it takes more skill to make them look great
slurmz123 1 month ago
man, I don't miss the old HGs, although, it does leave a ton of room for custom fabricating, maybe turn it into a master grade
TimberWolf429 1 month ago
You should think about reviewing grunts suits
ricepicker562 1 month ago
@ricepicker562 Grunt suits like the Serpent Custom?
scopeeyevideo 1 month ago
Looks surprisingly good for its age.
broodjebamibal 1 month ago
Aside from the bizarre purple color for the weapons, that's actually looking pretty decent for a 90's kit. Perhaps that dark green color would have been a better pick for the weapon plates?
222LoneWolf 1 month ago
Long live Treize Khushrenada!
TheInfamousWaffle 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
actually RRobbert, the Altron custom was also an antagonist MS.
BlitzkriegOmega 1 month ago
@BlitzkriegOmega Technically he was at the start of the OVA when he dueled Heero in the atmosphere, but doesn't play a role after that, but remember Wu Fei changes sides about 3/4 of the way through the movie. These guys were fighting the Gundams and Zechs all the way through the movie
Akiraofthewind 1 month ago
I'm so glad for this review, didn't expect rrobbert to do 1
gluteusMAXlMUS 1 month ago
This old kit looks really nice I would buy it I'd probably paint the weapons grey
MrChubs209 1 month ago
I gave the gatling gun to Heavy Arm so he can have two on the back as well as holding 2.
The guns colors are different though.
boeingnz 1 month ago
@boeingnz Really, the Heavyarm's gatling guns aren't purple? I figured they were being lazy, and just made the purple plates at the same time, to save money. Thanks for letting us know!
rrobbert184 1 month ago 6
@rrobbert184 Heavyarms gatling gun is blue, and this guys is a sand brown color, his beam gun is black. Your's is light purple for some reason... i don't know why. I have mine sitting in a box here so i checked to make sure i was right.
shadowblack1987 1 month ago
Hey Rrobbert, will you make an MG Heavyarms EW review? Would love to see it on your channel.
djzero1047fm 1 month ago 3
I believe that best thing about the old Wing HGs up to SEED's 1/100 line is the plastic figure that comes along with the model itself... XD
GenesicShinZyraelKai 1 month ago
Why do you keep calling it "gundam" ?
crandor6 1 month ago
@crandor6 cause most of his reviews are lead gundams.
menroko 1 month ago
@crandor6 I guess when you do gundam kits all the time you don't really realize it.
Athos523 1 month ago
@crandor6 They're all Gundam plastic models. I just use it in the broad sense. If I was revieiwng a Cobra Commander, I'd still call him a GI Joe on occasion.
rrobbert184 1 month ago 11
that's an awesome model and a great channel! Mine didn't come with white parts but yellow so i had to paint it also be careful with the thrusters the internal plastic in one of mine disintegrated and is being held together with blue-tac (i know, i suck). You might consider using a matte clear coat, i used it on mine and it looks 100 times better.
richard1701able 1 month ago in playlist HG 1/100 Serpent Custom - Gundam Wing Endless Waltz review
what do you mean? i look at the back of the knees all the time.
BustUpBots 1 month ago
@BustUpBots
Eh, I'm more of a, back-of-the-elbows, guy. <8D
cannonfodder4000 1 month ago
You can actually go over nub marks with your nails and actually scratch them, which makes them fade to tolerable levels.
Eucep 1 month ago
i got this when i was a kid =D
ssnake11 1 month ago
...Does this look at all familiar to you? Reminds me of Raiden from Virtual On.
AgaiLazen 1 month ago
Never got around to getting this kit, but I did snag up the 1/100 HG Nataku and Epyon. Not bad kits back then but they have a ton of problems now. Nataku won't even stand up. lol. Nice looking serpent though. Really takes me back.
txwalker13 1 month ago
bulky but looking so stacked up with weapons!
MargaretsLight 1 month ago
Amazing how you can assemble a kit in only 6 hours
crandor6 1 month ago
@crandor6
Umm....HG's only took 2 hours to build.....3 max with sanding and lining.
macro312 1 month ago
i like pie
Calvin1412 1 month ago
wow that was fast! great review thinking buying 3 of this what do you think?
neoscard 1 month ago