@St4rdog umm it's a like 2 year old game, how can you be that surprised it'll run on your hardware ?
I mean...tzz... it's supposed to work! Or do you guys don't even think about the money you spent before you spend it ? Do you get yourself a new computer and then collect informations about the hardware and what it can run etc. ?
actually this game in my oppinion came before its time .... there is not 1 computer on earth that will run crysis on 2560x1600 with full AA at 60fps ... its rather the game is shitley optimized or it is a very hard game to run ... so anyone should be suprized if there pc can run crysis at decent detail
Hi i am going to get a new computer and i cant afford a quad core, i want overclock a E5200 to about 3ghz maybe 3.2ghz is this safe and it it easy to do??
i hope you know those temperatures are very dangerous for that cpu, and the oc just makes matters worse, a Q6600 has a thermal design for 71.6 degrees celcius so with ur cpu being 45nm that will be even lower. your killing your chip.
Your running a Quad core 3.2ghz with DDR2 800mhz ram? your bottlenecking your system right there. You should be running some DDR3 1333 or 1600. Your CPU should be running 1600mhz FSB. I highly recommend you upgrade your ram to see the full potential of your hardware.
Well your limiting your whole systems performance with that. The majority of people think that a fast ghz rating is all they need... sadly that is not the case. DDR3 is not that expensive... you could pick up some DDR3 1600 and be fine. I myself have a 3.33ghz E8600 with a 1333mhz FSB. my mainboard is 1333mhz-1600mhz, my ram is DDR3 1600. As you can see I left wiggle room to upgrade my CPU to a 1600mhz 12mb cache at a later date. No need for me to run a quadcore right now.
ignorance at it's finest. No triple channel benchmarks nor ddr3 have even showed significant differences. DDR2 800 is more than fine. DDR3 is overpriced.
Im getting a quad core q6600, an ati radeon HD 4870X2, 4gb of ram of 1333 mhz, now my question is if i am going to have problems running the ati radeon in the intel processor???Pliz answer me........
what is the max overclock for this one?
ZinGrotto32 10 months ago
i blinked at 0:36 rofl
liaporros 2 years ago 3
Works nicely but destuction in Crysis is weak. It should be modded to something like in Red Faction: Guerrilla
OjStudios 2 years ago
lol...
10-25fps~!
ouch
QuadCore120 2 years ago
that's crysis for ya...
kobi63 2 years ago
Nice. I'm just about to order the same CPU and graphics card. Nice to know it'll run smoothly.
St4rdog 2 years ago
@St4rdog umm it's a like 2 year old game, how can you be that surprised it'll run on your hardware ?
I mean...tzz... it's supposed to work! Or do you guys don't even think about the money you spent before you spend it ? Do you get yourself a new computer and then collect informations about the hardware and what it can run etc. ?
that's quite... interesting I guess!
psp271seb3 2 years ago
Read me comment again. It says "I'm just about to order" suggesting I haven't ordered anything and was collecting information.
Numbnuts.
St4rdog 2 years ago
actually this game in my oppinion came before its time .... there is not 1 computer on earth that will run crysis on 2560x1600 with full AA at 60fps ... its rather the game is shitley optimized or it is a very hard game to run ... so anyone should be suprized if there pc can run crysis at decent detail
aaronplayesdrums 2 years ago
a SINGLE 5970 can run crysis with 16aa and 16af on enthusiasts on 2560x1600 with over 60 fps so there you go jus told you something you didnt know
freaktube4 2 years ago
lol what FPS do you have 40 50 ??
ultragaming1993 2 years ago
I bought computer with same cpu today . its awesome
lauris47 2 years ago
This has been flagged as spam show
What sort of performance could I get with this
Quad Processor Q9000 / 6MB L2 Cache, 2.0GHz, 1066MHz
Nvidia GeForce GTX 260M Graphics with 1GB DDR3
320GB 7200rpm SATA 300 Hard Drive
4GB Dual Channel DDR3 SDRAM at 1066MHz
....At what resolution and at what detail settting could I run on high?
and could anyone tell me which processor would be better Q9000 or P9600...I dont' care about battery life all about performance
Wongseifu548 2 years ago
This has been flagged as spam show
What sort of performance could I get with this
Quad Processor Q9000 / 6MB L2 Cache, 2.0GHz, 1066MHz
Nvidia GeForce GTX 260M Graphics with 1GB DDR3
320GB 7200rpm SATA 300 Hard Drive
4GB Dual Channel DDR3 SDRAM at 1066MHz
....At what resolution and at what detail settting could I run on high?
and could anyone tell me which processor would be better Q9000 or P9600...I dont' care about battery life all about performance
Wongseifu548 2 years ago
0:35 ouch!!
dacasman 2 years ago 2
Hi i am going to get a new computer and i cant afford a quad core, i want overclock a E5200 to about 3ghz maybe 3.2ghz is this safe and it it easy to do??
Asus P5KPL
Cooler Master CM-690 Dominator
OCZ 600W StealthXStream PSU
Sony DRU-860S 22x DVDRW
250GB Maxtor/Seagate SATA2
OCZ 4GB 1066MHz PC2-8500 Gold
Pentium Dual Core E5200,
Arctic Cooling Freezer 7 PRO
Window XP home
FightingFan24 3 years ago
the E5200 is an EXCELLENT overclocker and you could even get to 3.8-4.0GHZ with that system.
kobi63 3 years ago
is it safe??? I dont wanna mess up the cpu as i cant afford a new one and i dont wanna upgrade my cpu for atleast 9 months+
FightingFan24 3 years ago
it's safe if you know how to do it. and sometimes even if you don't..
like i said the E5200 is especially and easy overclocker, just make sure to read a lot about the subjet and you're done.
kobi63 3 years ago
come on this cpu is cheap now $225.00
dred770 2 years ago
i got my e8400 for 130$ at tigerdirect, but it may have just been on sale at the time.
etherealeyes 2 years ago
Ive got the 9850 its amazing
JoeLadleyYE 3 years ago
I have the Q9450 too with the Noctua NH-U 12F CPU-cooler and it runs perfect @ 4x 3,40GHz
Max. I get it to 4x 3,70GHz but thats the limit with aircooling.
graka2004 3 years ago
im sorry but it just doesn't work like that
Jord0699 3 years ago
After firing that rocket at 0:35, your head would have come clean off due to shrapnel. Check it out.
(plop)
Domzdream 3 years ago
so its normal that with my e6300 and a 4870 i still get min of 21 frames?
idmasterl 3 years ago
what res and settings?
Jord0699 3 years ago
lol Yea that would make a difference. 800x600 @ lowest. No that's bad. If you are playing very high 16AA and 1900x1200 you are doing damn good.
hercules71185 2 years ago
Q9450 or q9550? Extra money worth it or should i go with the q9450?
cryingmushroom47 3 years ago
overclock the q9450 ;)
if you have a good cooler
nivrin13 3 years ago 2
IN YA FACE!!! (0:36)
MaasterMax 3 years ago
huh? i thought u could only carry 1 missile launcher & 3 missiles each for 1 he mus be usin a cheat
cripkilla191 3 years ago
it's not me playing, it's a program for benchmarking Crysis
kobi63 3 years ago
o ok hehe
cripkilla191 3 years ago
that cpu costs 2000$ in my country :D. what GHz are u runing?
viciokas1993 3 years ago 3
3.2
kobi63 3 years ago
hey i was thinkin im gettin Q9450,
and how do i Overclock? (I DONT KNOW ANYTHING ABOUT PC) ^^
ibbi270 3 years ago 3
You can find some information about it on the net, it's not a prcise science, every computer is different
kobi63 3 years ago
what kind of cooling setup do u have for ure 9450 and how hot do u think or know it runs
howboutdat1227 3 years ago
i'm using Arctic Cooling Freezer 7 PRO
and the temps can get to 75-80 in full load using S&M
kobi63 3 years ago
80f or celcius?? cuz if it is celcius thats kinda dangerous
howboutdat1227 3 years ago
celcius... it can get pretty hot in full load but don't forget i'm with an OC
kobi63 3 years ago
i hope you know those temperatures are very dangerous for that cpu, and the oc just makes matters worse, a Q6600 has a thermal design for 71.6 degrees celcius so with ur cpu being 45nm that will be even lower. your killing your chip.
carrot5000 3 years ago
and without fraps, what kind of fps can u get ?
luithejoker 3 years ago
about 27 AVG, the weird thing is that i got LESS fps when using 64 bit mode.
and in the bench the first loop was a little laggy and the other 2 it runs very well..
kobi63 3 years ago
nice dude.
ime getting the same cpu soon would you recomend it ?
what if you dont mind me asking is your system specs due to how this vid runs ?
lordgeorgemaster 3 years ago
my specs are:
Intel Core 2 QUAD Q9450 2.66 @ 3.2GHZ
GIGABYTE GA-P35-DS3L
Arctic Cooling Freezer 7 PRO
GEIL 4GB(4x1) DDR2 800MHZ
GIGABYTE RADEON HD4850 512MB
WD 250GB 16MB SATA2
and i think you should go with this CPU only if you're not planning an Overclock
kobi63 3 years ago
yes thanks
no to be fair ime not planning to overclock.
how does it run crysis on very high on 2.66ghz ?
lordgeorgemaster 3 years ago
it runs great. don't worry, it's one of the best CPU's for none-overclockers
kobi63 3 years ago
cheers dude getting it end of this month so ile just have to cope with a oentium 4 playing crysis till then lol
lordgeorgemaster 3 years ago
Your running a Quad core 3.2ghz with DDR2 800mhz ram? your bottlenecking your system right there. You should be running some DDR3 1333 or 1600. Your CPU should be running 1600mhz FSB. I highly recommend you upgrade your ram to see the full potential of your hardware.
adamdrummer86 3 years ago
DDR3 is too expensive for me, the only way i'll get a DDR3 is in a CORE I7 system.
kobi63 3 years ago
Well your limiting your whole systems performance with that. The majority of people think that a fast ghz rating is all they need... sadly that is not the case. DDR3 is not that expensive... you could pick up some DDR3 1600 and be fine. I myself have a 3.33ghz E8600 with a 1333mhz FSB. my mainboard is 1333mhz-1600mhz, my ram is DDR3 1600. As you can see I left wiggle room to upgrade my CPU to a 1600mhz 12mb cache at a later date. No need for me to run a quadcore right now.
adamdrummer86 3 years ago
ignorance at it's finest. No triple channel benchmarks nor ddr3 have even showed significant differences. DDR2 800 is more than fine. DDR3 is overpriced.
hercules71185 2 years ago 4
absolutely true
CowShaker 2 years ago
Im getting a quad core q6600, an ati radeon HD 4870X2, 4gb of ram of 1333 mhz, now my question is if i am going to have problems running the ati radeon in the intel processor???Pliz answer me........
solmaco 3 years ago
no won´t get any problems with an intel board.
ohleck 3 years ago
VERY NICE FRAMES
melevske 3 years ago