@6Slipknot5 they are not tech deck wheels. tech deck wheels are a chunk of plastic. these are the same material as real skate wheels and they have real bearings in them
no i have g4d's and there fine you really dont need washers but if you fingerboard like even while your sleeping i'd recomend washers which is wht i ave :D
Mike is a Fucking liar, Im sorry... he says he makes them With a metal mold thats not true, pretty much ALL of my friends have G12's and EVERY one has something different about it... whether the kicks are higher, smaller, concave is less or concave is more, or its even thicker or thinner He does NOT MAKE THEM WITH A METAL MOLD unless he has 5 different metal molds...
its called warping once OUT OF THE MOLD. if the deck isn't fully dry it can end up with a warp to it. oh and let me emphasize that this happens out of the METAL mold. k thanks =)
yeah i know just because he uses a metal mold the decks cannot possibly warp. the ones that are warped mike snaps( trust me ive seen him do it at his house) its possible that maybe a warped deck accidentaly got into the good decks stock and im sure he would replace it if you sent it back.
For the most part, yes they will work. Theres nothing wrong with the wheels, The only time something like that will happen, is if You over tighten the Nut, in that case just loosen it a bit.
dude a flatface g12 does'nt have a free samp that's a sticker that is free when u buy a flatface wheel whenever u buy a white flatface wheel u will get a white sticker like that
does the g12 deck fit on tech deck trucks??
TheUranus16 3 months ago
is the g12 as wide as a berlinwood or not as wide???
daniyluppert 3 months ago
@daniyluppert G12=27.5mm G12 Wide:28.5mm Berlin Wood:30mm
Shadowman928928 3 months ago
@Shadowman928928 lol. the wides are 30.5mm. and normal are 28 or 29mm i beleive
Koolkid736 2 months ago
EWWWWWWW 1:32>>LOL
skinnyjeanwearer 6 months ago
im sorry did you 30 bucks for tech deck wheels?
6Slipknot5 7 months ago
@6Slipknot5 they are not tech deck wheels. tech deck wheels are a chunk of plastic. these are the same material as real skate wheels and they have real bearings in them
Koolkid736 2 months ago
@Koolkid736 i know that now i actully have some
6Slipknot5 2 months ago
would you recommand close up g4 or flatface g12?
RomaniaNArmY555 7 months ago
@RomaniaNArmY555 flatface g12 is 100x better close up sucks
Koolkid736 2 months ago
i have same deck
TheMihQ 9 months ago
Is it easier to kickflip?
hofnerbassXD619 11 months ago
@hofnerbassXD619 ivnot got one yet but i suppose theyd have more control so probably yeah
leelou2010 8 months ago
i heard a lot of wraped decks would that happen and those the tail and nose hard to use since the nose is lower
nickmez16 11 months ago
nice kick flip at 2:16
homedecksfbs 1 year ago
what trucks r u using?
KanonFingerboards 1 year ago
Or you can go to your nearest target or walmart and buy for $2.99 if you're poor like me
Markskate1021 1 year ago
g12 deep or reg please reply
ginywiny 1 year ago
@jakdask8tr g12
seanw109 1 year ago
@seanw109 have u had a berlin wood? which kicks are higher
jordann198 1 year ago
Yoooo what camera do you have!
xBryanx12 1 year ago
@xBryanx12 canon optura 20
seanw109 1 year ago
@seanw109 where do u buy washers for the wheels!!! i need some BAD and cant find em anywhere!
sk8erdude454 7 months ago
do all g12 have flatface logos on it?
poopyman105 1 year ago
@poopyman105 thats a sticker
SkaterboarderTapsu 1 year ago
do u need wheels washers for g4's?
TheSmallfang 1 year ago
@TheSmallfang yeah
EmericanGangstarr 1 year ago
cool
KillTheFrog199 1 year ago
what kinda grip?
maple879 1 year ago
nice ff g12 cool vid too
rdescosar26 1 year ago
hi, does anyone know the length of ff g12s? thanks!
burntcookie123 1 year ago
can you please compare g4-a wheels, and g4-d because i dont know which ones to chose, btw i subbed
ginywiny 1 year ago
sean witman
ginywiny 1 year ago
wow this bottom ply looks amazing [=
AsafXD 1 year ago
what trucks are you using in that setup?
aceplaya147 1 year ago
ha just wondering if you live in a marica or new zeland thanks
Longboard283 1 year ago
this bottom ply looks amazing [=
AsafXD 1 year ago
the new g12's are longer and the holes are drillled more far apart lol. MY FBS DIDNT FIT HAHA
caldude311 1 year ago
@seanw109 Is that a wide or regular?
123Will456789 1 year ago
does mike shipped the stuff anywhere in the world?
Gameplays123 1 year ago
what kind of trucks are those and where can I get some?
NathanQuintonAllen 1 year ago
@NathanQuintonAllen painted tech deck trucks in my opinion
LUXfingerboard 1 year ago
What Kind Of Trucks are Those?
FlatFaceFingaBoards 1 year ago
@impiderman yes theyre very strong.
seanw109 1 year ago
is that the wider version?
MountainPeakFBS 1 year ago
what trucks?
nzfingerboard 1 year ago
is your G12 wide ???
CarbonFingerboards 1 year ago
dude do u have holes in ur tape?
wiiplayers0124 1 year ago
you cut tape rely good
TheKffb 1 year ago
@TheKffb watch harrys video how to tune a setup part 1 and you will see how easy it is ;)
LUXfingerboard 1 year ago
perfect rip tape job
SkootedOut 1 year ago
would a fbs precut fit a flatface g12 wide correctly?
chechubelo 2 years ago
hey what type of camera do u use
creangsta 2 years ago
i have a warped g12
cod4glitch2 2 years ago
ahh bum email mike
blawman42 1 year ago
flatflace lol
bananers114 2 years ago
sean, are you sponsored by flatface? Or are you a part of the team?
FBjoaFB 2 years ago
yes im sponsored by flatface
seanw109 2 years ago
Comment removed
flatface4lyfe 1 year ago
uhhh you do realize that's the same thing right?
EmericanGangstarr 1 year ago
@FBjoaFB is ther even a difference from bein sponsred and part of the team?
MrJackass7515 1 year ago
@FBjoaFB is ther even a difference between being on the team and bein sponsored?
MrJackass7515 1 year ago
@FBjoaFB ummmm that's the same thing.
EmericanGangstarr 1 year ago
heya mahn ermmm im getting the same setup as youu i just not sure what to gte the g4,s or the winkler wheels off blackriver anyone got any ideas
scottyyy100 2 years ago
@scottyyy100 get winklers
TheFingerSteeze 2 years ago
G4's
FingerSayer1 2 years ago
whats better, g4e? or g4o?
pwnfingerskill7 2 years ago
did you use pre cut fbs?
jd2319 2 years ago
the board is thin because the company name is flatface
emmireen 2 years ago
@emmireen lol
warlands719 2 years ago
haha
TheLOCOfb 2 years ago
How come some G12's need wide trucks and some G12's need regular trucks?
FingerSayer1 2 years ago
g4 wheels are wider than normal, or some people prefer regular trucks
CerealFB 2 years ago
Comment removed
jd2319 2 years ago
thanks alot :) i use a cannon optura 20.
seanw109 2 years ago
hey, is this the wide edition or regular? thanks
skydog711 2 years ago
it's the regular
AndreRGN 2 years ago
It´s The Regular
TheKickfliper1 2 years ago
mine is warped but he did give it to me for free
REDzonefingerboard 2 years ago
yes they do but you have to supa glue them
jab7805 2 years ago
great review!
berlinwoodfb182 2 years ago
is it wide? the trucks are regular
Liamrox463 2 years ago
fbs precut fit g12?
emmireen 2 years ago
how did you grip your deck is freaking perfect
xSkaterBoy09 2 years ago
@xSkaterBoy09 he uses the pre cut rip.
zachfingersPIERCE 2 years ago
are they wide
fingerboarddude121 2 years ago
1:31 haha
ok101108 2 years ago
what fits best fbs or rip and is that red or orange and u just got a sub
bcmc418 2 years ago
are you on the flatface team?
MathSi21 2 years ago
yepp
seanw109 2 years ago
hey how much higher are the kicks than a tech deck. i dont ride tech decks thats just what i want to compare it to.
zachfingersPIERCE 2 years ago
i will buy this deck off of u how uch u want
saintdan187 2 years ago
sorry man i cant sell stuff i got from mysponsors.
seanw109 2 years ago
oh ok
saintdan187 2 years ago
doz rip come with the board if u buy it off flatface?
RyleeShannon 2 years ago
@RyleeShannon
no
zeroactivefb 2 years ago
dude ralphy is giving me his old g 12 with wide truck and bearing wheels
sabby432 2 years ago
what should i get a scott b deck or a g12 deck
branolli 2 years ago
g12 in my opinion
TheJamesDevitt 2 years ago
just get a g12 you would be able to get some nice wheels with it aswell maybe cus scott B s deck is like $55
cookiecamp 2 years ago
What are you talking about?!?! Scott B decks are $30. Thats the same price as a G12.
RsDudeHelper 2 years ago
lol there 30
VentureFBS 2 years ago
im talking about his signiture
cookiecamp 2 years ago
they actually just made a scott b g12 pro model check it out on the flatface website
boardwithwheels 2 years ago
wat kinda rip is that
113Adam 2 years ago
how much was the board?
Nyer95 2 years ago
They are arround $30 on flatface. im not sure exactly how much since im on the team.
seanw109 2 years ago
thanks
Nyer95 2 years ago
im going to buy both. the wheels and the deck
bakuganskate 2 years ago
does it come with grip tape
EtchamaSketch 2 years ago
sadly, my g12 is warped, and i had to re-laquer since it wasn't great.....but then again, i purchased mine when they first came out.
burntcookie123 2 years ago
can you use regular trucks?
jaydee1194 2 years ago
@jaydee1194 yes you can you can also use tech deck trucks if u want!
proFinga 2 years ago
This has been flagged as spam show
Help me !!!
Should I get the g12 or the berliwood new mold !!!
NestorManeraa 2 years ago
Comment removed
NestorManeraa 2 years ago
the sides of my g12 wore down
wailed72 2 years ago
are you runing the wheels on regular tech deck trucks without tuning
scrapyardroks 2 years ago
no i have g4d's and there fine you really dont need washers but if you fingerboard like even while your sleeping i'd recomend washers which is wht i ave :D
wisconsinskater09 2 years ago
is that precut rip?
BloozGlasses 2 years ago
Mike is a Fucking liar, Im sorry... he says he makes them With a metal mold thats not true, pretty much ALL of my friends have G12's and EVERY one has something different about it... whether the kicks are higher, smaller, concave is less or concave is more, or its even thicker or thinner He does NOT MAKE THEM WITH A METAL MOLD unless he has 5 different metal molds...
lonewuf 2 years ago
yeah actually he does have 5 different metal molds and he doesnt use the same woods all the time which effects the shape somewhat. chill.
seanw109 2 years ago
any idea when the g12 graphics are coming?
FingerBrawl 2 years ago
its called warping once OUT OF THE MOLD. if the deck isn't fully dry it can end up with a warp to it. oh and let me emphasize that this happens out of the METAL mold. k thanks =)
cclmagic 2 years ago
yeah i know just because he uses a metal mold the decks cannot possibly warp. the ones that are warped mike snaps( trust me ive seen him do it at his house) its possible that maybe a warped deck accidentaly got into the good decks stock and im sure he would replace it if you sent it back.
seanw109 2 years ago
oh okay but that was at lonewuf
cclmagic 2 years ago
do g4s wear
kool26160 2 years ago
well there really smooth a hard and durable cause i have em,wht kind of wear like the back or general?
wisconsinskater09 2 years ago
please anwser back I have to know have you got wid or regular trucks I m getting the same wheels and board^^
Lonth117 2 years ago
do you have regular trucks on that?
scenexfinga 2 years ago
im getting a g12 and black g4 wheels, thik ima do a review myself
xXxERICxXx8 2 years ago
he says he makes the g12 decks with metal molds... BULL-SHIT 5 of my friends have g12's and every one has a difference.
lonewuf 2 years ago
how wide and long is it??
write me a PN
Christian94R 2 years ago
I gott g4 wheels and I would like to say..
AMAZING
xXPirlo21Xx 2 years ago
my g12 should be here tomorrow i got G7z's and FBS with it
Fingerboarder83 2 years ago
Im 100 Coment :D But Thanks For Help Hehehe I Want Buy Some FF G12 Deck :D
vapormercury 2 years ago
does he have fbs tape on that shit
edwardspedding 2 years ago
i gotta a g12
techskater96 2 years ago
do g4,6,7 work perfect on td trucks cause i heard a couple peeps say they wounldnt spin :/ n i just ordered g6d's white so idk :/
wisconsinskater09 2 years ago
For the most part, yes they will work. Theres nothing wrong with the wheels, The only time something like that will happen, is if You over tighten the Nut, in that case just loosen it a bit.
TheTruthishere2stay 2 years ago
which wheels are better g4 er 6?
thease are Also my first bearing wheels so idk lmao and i have a BW nm which is my first wood finger board with rip :)
wisconsinskater09 2 years ago
they both perform the same. Its just g4s have a larger and boxyer shape.
TheTruthishere2stay 2 years ago
hmmm?so are the light blue g6a's good?
wisconsinskater09 2 years ago
All flatface wheels are good.
TheTruthishere2stay 2 years ago
Yup ended up ordering the white g4'd's
for 30 exact with shipping :D
my mom thinks its retartedtho but w/e its my first FF order n first bearing wheels so idc :)
wisconsinskater09 2 years ago
thx for your help ,i will buy me a g12
ilikeandrewreynolds 2 years ago
is G4 blacks made out of the d material?
mattleeboy 2 years ago
yes they are
MaxxwellTheLegend 2 years ago
are they better then berlinwood ,cause i want to buy a g12 deck.and are they wide or normal .please help :)thx
ilikeandrewreynolds 2 years ago
it depends on what shape you like i like my g12's more than bw's and they arre 28mm wide
seanw109 2 years ago
How wide is it?
jayhawk2048 2 years ago
what truck you use?
SuperBerlinwood 2 years ago
Nice, but Mad Genius decks have waaay better lacker.
rs2p00nz 2 years ago
looks awsome
jplemaf 2 years ago
the dips are like flat but the craftsmen ship is nice
connorzz10 2 years ago
yea you can barely see them
Up0nDaRkNeSs 2 years ago
what kinda camera u got?
vidzofeverything 2 years ago
mine was warped, it makes my trucks not fit right :(
FingerBoardering 2 years ago
Name of the grip fbs or riptape uncut or precut ?
eyyyyyyyyyyyy 2 years ago
Fbs precut... riptape doesnt come that wide precut
sk8rack 2 years ago
looks like fbs pre cut
FAMILYGUYAWESOMENESS 2 years ago
wat kind on grip pre or a sheet
TheZaPxClan 2 years ago
sheet
HarryYeates 2 years ago
my g12 didnt have a stamp either,.....and i only got it a couple days before you
BigDaddyFusco 2 years ago
I got mine 3 days ago and i had a stamp and ist wasnt warped
Fingerboarder42 2 years ago
did they come with washers? thanks.
drchoclatmilk 2 years ago
g12's have stamps
seanw109 2 years ago
my g12 did not have a stamp.
FingerBrawl 2 years ago
dude a flatface g12 does'nt have a free samp that's a sticker that is free when u buy a flatface wheel whenever u buy a white flatface wheel u will get a white sticker like that
vanespejo28 2 years ago
stamp*
vanespejo28 2 years ago
usually g12's have a stamp on them... -.-
FingerBrawl 2 years ago
they have a stamp on the top of them so we can figure out easily whats the tail and whats the nose of the deck. I know it was a sticker.
FingerBrawl 2 years ago
the stamp is on top of the deck. duhh
fingerboardrider 2 years ago
my friend branon j. says ur a froad. he bough a 2 tone absolute and it NEVER CAME.
doracrossedtheborder 2 years ago
Comment removed
doracrossedtheborder 2 years ago
are they normal or wide trucks?
magic629 2 years ago
cool setup. i got the g4d's for my birthday. good review. i'm going to put them on one of my company decks.
wholewooddecks111 2 years ago
Great Review.
lonewuf 2 years ago
ahah wtf dude i ordered the same thing as u! i ordered a g12 and g4 white wheels! ahaha lol we hv same setup
wweadmen 2 years ago
tape?