Sony Bravia LCD problem

[imgingerindenial]

mine does this but only half the screen and its shadowed but if i shake it enough it goes? help help

[sarawa2]

@imgingerindenial I think you have a loose tab. Look at how-to videos where they put something to press against the LCD tabs. I think that would work for you.

[NTKsuckit]

@sarawa2 i discovered the problem i was working on my tv and simoulted the issue by loosing the data cable from the lcd itself

check and or replace that cable from the lcd to the gpu

[compizcrash]

Ghost freak me out,man. !

[kw35795450mhz]

BEAM ME UP SCOTTY!!!!

[xakyboy]

i have one ,sony sucks it breaks down in 20 months problem with the t-con board and its not available

[sarawa2]

This turned out to be a bad panel. Pressing against the LCD tabs didn't help, so I took it apart and sold the different boards on eBay. The T-Con and Main Board were both fine (and used by eBayers to fix other bad tvs).

[jimvincentvillanueva]

Replaced the T-con board.

[Tunerboy8732]

I have the same tv and never experienced this kinda problem.

[xakyboy]

90$



[vlogsmack]

@xakyboy Your full of shit xakyboy,,,

[xakyboy]

put the t-con board 70$ and it's ok

[gunde93]

remove the outer panel and make sure all the ribbons are attached

[zionaxel27]

how to fix that problem? because that was my problem too??

[sarawa2]

The blue warning message in the end is irrelevant to the tv's problem. It was the DVR complaining about my clicking.