need some help. so ive got all the different parts of my song in the playlist and their in the right place etc etc. but when i go to mix the track it goes funny. ill link a channel in the mixer to a peice of music but it doesnt work. on the odd occasion it does work it links the channel on my mixer to the wrong bit of music. does anyone understand this or know how to help me?
@HipKnokerZ cheers for replying. ok so i rap and i record verses right. after theyve all been recorded i open them and put them all in the playlist in the right place. but obviously i need to be able to change the volume of these verses when im mixing. and when a select a channel for a verse the channel starts controlling another verse. then i try another one and it does the same. i know its really hard to explain i hope you understand
Hey man I need some advice. When I'm mixing to have the volume loud enough or the beat to be heard properly the meter always says that it's 'clipping' only really when the kick and snare are hitting. But I don't get any distortion from this or anything. But then for post mastering I drop the beat down to leave headroom . Is this an ok way to mix?
ive been makin music for a while now and im starting to concentrate on a good mix.. but the main problem im having is getting my kick to not interfere with my main instrument. when the kick hits. it makes the volume of that instrument drop. i know why it does, because the frequencies are colliding, but if i take out that part of the frequency then my kick sounds like plastic... please give me some advice.
@JayMbeats Sup dude, check out side chaining on youtube. Best way to fix it homey. Another way is to pan the instrument off center and let the boom stay in the middle. Check it out, holla back if you need more. God Bless.
I mix everything to -20 DB, then throw a maximus, parametric EQ, and a multiband compresser on the master track. I also cut the unheard frequency's with the parametric EQ. Once the maximus is on it makes everything sound much louder. Then I do the mastering. :P
So once you get it mix down to -12db and it sounds good, then it's ready to get it master? Or you mix it a little louder? Like--5db or your -12db concept is what I should stick with for best results????
@myflowbeats It all depends on the song. You want to create "head room". This is the extra space in the volume before you hit 0 db. If you want to mix is louder, just make sure it doesn't bleed or crack (sound quality). Some people master songs with no effects on the master tracks, and it works for them. I am just showing ONE of the ways to do it, not THE way to do it.
@HipKnokerZ What i dont get is, is it okay to add effects to one of the instruments on its mixer track before mixing or mastering? like if you have a raw 3xosc saw and it sounds bad..? e.g flangus, fruity Parametric EQ, chorus or reverb?
@JamalHoltMusic 1. adding effects is part of the mixing process, 2. If a sound sounds bad, then 9 times out of 10, when you put effects on it, it won't sound any better.
@HipKnokerZ i have a question if you dont mind :) lets say i have a track i have in my playlist, but i diddnt just use a stock sound. i manipulated the sound, (like twisting the knobs and stuff like that) but when i export to mp3, it plays the song exactly how i have it, except it doesnt use the manipulations i made, it still sounds like the stock sound.... any ideas????
Hey Thanks Man, But I Checked The 2nd Mixer Tut And The Vids For Mix And Master, Couldnt Find It, lol. Prolly Have More Questions In The Near Future, lol. Im New With FL Studio:) Thanks Again For The Reply And Great Vids!!
And If You Could Give Me Some Feedback With The Beats I Have Up, Would Really Appreciate It!! ttyl
Hey Great Tutorial!! Did Help Alot!! I Just Had One Question, If You Put A Instrument Into The Mixer, But Later On Wanted To Take That Out Cuz You Decided Not To Use It, How Do You Remove The Instruments From The Track? Anyway Way Just To Clear The Tracks And Start New? BTW I Subbed:) Thanks Again For The Helpful Video's:)
@joshhg93 Sure, just hit the channel selector and go to the FX option on the top right of it. The numbers correspond to track numbers on the mixer. A faster way is to go to the channel selector and hit CTRL + L and it will automatically place it in a channel and label it for you. Hope this helps. Peace
im challenging those who claims to be music tutors, to start doing the real mixing and mastering, to drop legit knowledge about this gig.all i have seen is pre mixed and mastered material, where music nerd's are just showing you knobs.it doesn't matter what kind of music,and what kind of software you use.make sure its a full track,with vocals!then make an epic life on youtube, do not pre-mix/master & then show us the results,we want to see you obtain those results, and talk through the vid.
@HipKnokerZ no man thank you i found it!!!!!but i cant find how to make an automation clip to make the sound of drums for example look louder at first and the to mute them slowly if you can help me with that you are the best!
@SIMONDUKEN Right click on what you want to automate (mute/unmute button on mixer, fader volume, panning knob, whatever) and pick "create automation clip". then go to the playlist and manipulate the clip. Hope this helps
Hey man, love your tutorials, ive learnt so much off you! if you havent allready would it be possible to make a tutorial about a basic way to compress kicks and snares to make them louder without introducing massive peaks? its something i am just struggling to master. CHEERS MAN< YOUR THE BOMB!
@junez85 Now that school is starting back for me, I will be on a better schedule to work on videos. For now I suggest you look up "FL Studio GURU", he has one already on compression. Whatever I will do on video will just be a replica of this, cause this is how I learned :)~. Also look up "NFX" he has wonderful tuts.
i made a track i have a beat which i wanna keep in the center n i have a piano pattern and a dark piano pattern n i want them to be on the opposite side of the surround sound
im not able to do that cause i dont see a different insert on the mixer
One of the few videos on YouTube that actually teaches people valuable mixing skills. I see sooo many that are like "Yeah just chuck a Soft Clipper and Soundgoodizer on the Master and she's sweet" and it's scary to think that go and destroy their songs like that. Thanks for putting this up and thanks for knowing what you are doing! ^^
Thanks for the encouragement, again, I only put up what I learned, and I still have alot of learning to do. But I do have 6 years of research so I hope this helps.
hey i'm havin a problem when i'm mixing down a beat, i beat an eq on each sounds same as the compressor, and when i wanna listen to the track its crashing. help please
what you do is left click on each pattern/instrument(in the pattern stepp sequencer) then a little box comes up with small keyboard and across the top are two boxes with numbers
go to top far right one left click and hold then scroll up or down. You will see the number change. these numbers correspond with the channel on the mixer
do this for each instrument. assign each to different numbers on the mizer
@FreshBeatz321 click the sound sample ur using and a box will pop up called channel settings in the top right there is a square cant miss it i think it says fx what ull do is click and move ur mouse up and put it in channel one or whatever u want also ur gonna have to do that to all of em if u havent
@FreshBeatz321 just click on the instrument or audio when its in the pattern box thing, then right click on the mixer track you want it in, then go to "link selected channels" and then "to this track"
I just wanna give mad respect to HipKnokerZ for putting this up, Its hard to find these kind of videos on mixing and mastering. And to SillyEagle, sure maybe the beat wasnt as complex as you would like it, but I think the purpose of the video was to mix, not to make the fattest beat that ever hit the interwebs.
I really liked your channel and this video. If you need any help getting this video exposed I use a site called tubeviews.(net) It has really helped like 20 of my main videos get to the top in position. Its nice.
I enjoyed this video a lot! I am just now getting into FL Studios. I have version 7.0. Can you tell me what version you are using because yours looks a little different from mine. I am trying to find that big meter in mine, but having trouble. Thanks!
My dB Meter goes over -12 but when I put the volume of the channel down, the dB Meter keeps showing the same. Also when I put the Master volume down, even if i turn of all the volume. What do i have to do?
Hey waz up man i watched your tutorials on mixing and the other fl tutorials you have on your youtube channel. I though they were very usefull to me. I am trying to learn mixing,equing and mastering a song. So if you can tell me how like you learned how to do it step by step to what evrything in between means id appreciate it please. I been practising myself too.Also check out my myspace page and tell me what you think.
Leave your myspace link here. Mixing, equing and mastering is not easy for me to explain. I read a couple of books and been working on it for about three years now. It takes time, no short cuts.
Any sounds that I have either come from fl plugins or samples that I have. Just do a search for sound samples and you will find millions of them, literally.
yo bro, i really wanna thank u for this tutorial cuz now im very clear of what mixing is and more with the fruity loops, this is what i needed. I really appreciated this tutorial. let me get ur email so we could keep in touch cuz i would like to ask sum questions. I mess with everything hip hop, reggeaton, latin rythms everything. but this helped me a lot
?2 put the fruity db on the master track, then make sure each instrument is on a separate track, then mess with the volumes and see the db meter change
great tutorial mate, two question have u got all them sounds in one pattern? and the other if i use the fruity db i can only seem to change the db down by changing the voloume on the step sequence and if i use the volume on the mixer it makes no diffrence. how are u doing it all by the mixer.
this is a great help but when i try and turn my kick down, the db metre stays the same so im unable to bring it down to the -12 mark... post back if you can help me... thanks
I would yes, because of two reasons: 1, FL has a mixer that is Virtual, which means what you do on it is what you would do on a real mixer, and 2, you want to control volumes and panning of each individual track to mix appropriately. Now it depends if your analog mixer has many track slides or not, but you get the picture. Grace and Peace.
If u use a real mixer (table) do u need to put every "instrument" on a track like we used to do on FL ? I mean after 2 years of productions on FL i'm tryin' to start usin' real equipements + FL but I'm missin some infos :( ...maybe the SteveMusic store could help me lol !
need some help. so ive got all the different parts of my song in the playlist and their in the right place etc etc. but when i go to mix the track it goes funny. ill link a channel in the mixer to a peice of music but it doesnt work. on the odd occasion it does work it links the channel on my mixer to the wrong bit of music. does anyone understand this or know how to help me?
kawasakikid800 2 weeks ago
@kawasakikid800 explain linking a channel in the mixer to a piece of music? You link instruments to the mixer, you dont like music to the mixer.
HipKnokerZ 2 weeks ago
@HipKnokerZ cheers for replying. ok so i rap and i record verses right. after theyve all been recorded i open them and put them all in the playlist in the right place. but obviously i need to be able to change the volume of these verses when im mixing. and when a select a channel for a verse the channel starts controlling another verse. then i try another one and it does the same. i know its really hard to explain i hope you understand
kawasakikid800 2 weeks ago
@kawasakikid800 can you post a vid of your problem so I can see it? Or send me the FLP and let me take a look at it. HipknokerZ@aol.com. Holla
HipKnokerZ 2 weeks ago
@kawasakikid800 can you post a vid of your problem so I can see it? Or send me the FLP and let me take a look at it. HipknokerZ@aol.com. Holla
HipKnokerZ 2 weeks ago
hey man what is the name fo that meter you're using for the decibals? Nice vid btw. it helped
MelonHead1848 1 month ago
@MelonHead1848 Voxengo Span
HipKnokerZ 1 month ago
Hey man I need some advice. When I'm mixing to have the volume loud enough or the beat to be heard properly the meter always says that it's 'clipping' only really when the kick and snare are hitting. But I don't get any distortion from this or anything. But then for post mastering I drop the beat down to leave headroom . Is this an ok way to mix?
jazzbluesshred 1 month ago
@jazzbluesshred You should be able to mix without it clipping. But I guess do whatever works.
HipKnokerZ 1 month ago
@HipKnokerZ nvm ! i got it its cause i was turning them louder rather than using compression to pump it up haha!
jazzbluesshred 1 month ago
ive been makin music for a while now and im starting to concentrate on a good mix.. but the main problem im having is getting my kick to not interfere with my main instrument. when the kick hits. it makes the volume of that instrument drop. i know why it does, because the frequencies are colliding, but if i take out that part of the frequency then my kick sounds like plastic... please give me some advice.
JayMbeats 1 month ago
@JayMbeats Sup dude, check out side chaining on youtube. Best way to fix it homey. Another way is to pan the instrument off center and let the boom stay in the middle. Check it out, holla back if you need more. God Bless.
HipKnokerZ 1 month ago
mixing is more the volume, panning and efects of the individual soumd, mastering is the mixing of the whole song as a whole
HipKnokerZ 5 months ago
whats the name of the song 0:13 and where can I get it?
nirson123 7 months ago
thumbs up if you yawned after he did
HazeyBlaze420 10 months ago
I master every thing to -20, then on my master i use "Parametric EQ" and "Multi-band Compresser". Its very common.
iG3Tby 11 months ago
those r some good tips dj. quick question, why do you put maximus and a multiband compressor together? They r both compressors?
HipKnokerZ 1 year ago
I mix everything to -20 DB, then throw a maximus, parametric EQ, and a multiband compresser on the master track. I also cut the unheard frequency's with the parametric EQ. Once the maximus is on it makes everything sound much louder. Then I do the mastering. :P
DJEpileptik69 1 year ago
@DJEpileptik69 unhead frequence? i hear everythin! yo!
Ioganstone 6 months ago
So once you get it mix down to -12db and it sounds good, then it's ready to get it master? Or you mix it a little louder? Like--5db or your -12db concept is what I should stick with for best results????
myflowbeats 1 year ago 2
@myflowbeats It all depends on the song. You want to create "head room". This is the extra space in the volume before you hit 0 db. If you want to mix is louder, just make sure it doesn't bleed or crack (sound quality). Some people master songs with no effects on the master tracks, and it works for them. I am just showing ONE of the ways to do it, not THE way to do it.
HipKnokerZ 1 year ago
@HipKnokerZ OK good to know
myflowbeats 1 year ago
@HipKnokerZ What i dont get is, is it okay to add effects to one of the instruments on its mixer track before mixing or mastering? like if you have a raw 3xosc saw and it sounds bad..? e.g flangus, fruity Parametric EQ, chorus or reverb?
JamalHoltMusic 11 months ago
@JamalHoltMusic 1. adding effects is part of the mixing process, 2. If a sound sounds bad, then 9 times out of 10, when you put effects on it, it won't sound any better.
HipKnokerZ 11 months ago
@HipKnokerZ But i mean like if i want a certain sounding synth, because with the 3xosc you just get a raw synth with no special sound or anything
JamalHoltMusic 11 months ago
@JamalHoltMusic Yes, you could create sounds. In that process you can mix too
HipKnokerZ 11 months ago
This has been flagged as spam show
@HipKnokerZ i have a question if you dont mind :) lets say i have a track i have in my playlist, but i diddnt just use a stock sound. i manipulated the sound, (like twisting the knobs and stuff like that) but when i export to mp3, it plays the song exactly how i have it, except it doesnt use the manipulations i made, it still sounds like the stock sound.... any ideas????
DJAPK 8 months ago
@pawelh9 ? what ?
HipKnokerZ 1 year ago
where in the mixer is the gain knob located?...
thanks.
sagetajr 1 year ago
Hey Thanks Man, But I Checked The 2nd Mixer Tut And The Vids For Mix And Master, Couldnt Find It, lol. Prolly Have More Questions In The Near Future, lol. Im New With FL Studio:) Thanks Again For The Reply And Great Vids!!
And If You Could Give Me Some Feedback With The Beats I Have Up, Would Really Appreciate It!! ttyl
ItsYourBoyo7 1 year ago
is there any way i can get that beat
cooled321 1 year ago
@cooled321 Depends what you are going to do with it. PM me and let's talk. ChristUP!
HipKnokerZ 1 year ago
Hey Great Tutorial!! Did Help Alot!! I Just Had One Question, If You Put A Instrument Into The Mixer, But Later On Wanted To Take That Out Cuz You Decided Not To Use It, How Do You Remove The Instruments From The Track? Anyway Way Just To Clear The Tracks And Start New? BTW I Subbed:) Thanks Again For The Helpful Video's:)
ItsYourBoyo7 1 year ago
@ItsYourBoyo7 You can mute it or just go to your step sequencer and delete it. Thanks for the sub.
HipKnokerZ 1 year ago
Thanks! U helped alot!
joshhg93 1 year ago
@joshhg93 That's what it's about.
HipKnokerZ 1 year ago
@HipKnokerZ
Thanks man! You are a life savior lol
I apreciate it!
Good luck on the production of music!
Josh.
joshhg93 1 year ago
Hey man you think you can help me on how to put every instrument in its own chanel?
Thanks
joshhg93 1 year ago
@joshhg93 Sure, just hit the channel selector and go to the FX option on the top right of it. The numbers correspond to track numbers on the mixer. A faster way is to go to the channel selector and hit CTRL + L and it will automatically place it in a channel and label it for you. Hope this helps. Peace
HipKnokerZ 1 year ago
man this beat is badass!=D
great job!! i wish i could listen more than the 5 seconds it plays for=/
great job!
joshhg93 1 year ago
im challenging those who claims to be music tutors, to start doing the real mixing and mastering, to drop legit knowledge about this gig.all i have seen is pre mixed and mastered material, where music nerd's are just showing you knobs.it doesn't matter what kind of music,and what kind of software you use.make sure its a full track,with vocals!then make an epic life on youtube, do not pre-mix/master & then show us the results,we want to see you obtain those results, and talk through the vid.
justmusicify 1 year ago
@justmusicify uuummm, that's called paying for knowledge, what people go to school for and become professionals, you want all this for free? mmmm.
Don't get me wrong, I would love to see this too, it just doesn't happen. Let me know when you find it!
HipKnokerZ 1 year ago
Hey nice video, but how did you get that meter with the decimals?
Vladjoseph 1 year ago
can you mix a track for me
YoungSwaggaSOB 1 year ago
am new with the FLstudio i wana know how did u get each instrument in an individual track
MegaJozhua 1 year ago
Thanks for this!!! helped a lot man
NbaLive4ever 1 year ago
i need to know how i get the spectrum analyzer youre using,please
Lbeatful 1 year ago
@Lbeatful voxengospan
HipKnokerZ 1 year ago
@HipKnokerZ thanks a lot hipknokerz
Lbeatful 1 year ago
i dont know how to put them there...it shows me only the snare and the the kick...not the bass strings synth and others
SIMONDUKEN 1 year ago
@SIMONDUKEN Can you make a video response here and show me what you are talking about?
HipKnokerZ 1 year ago
@HipKnokerZ no man thank you i found it!!!!!but i cant find how to make an automation clip to make the sound of drums for example look louder at first and the to mute them slowly if you can help me with that you are the best!
SIMONDUKEN 1 year ago
@SIMONDUKEN Right click on what you want to automate (mute/unmute button on mixer, fader volume, panning knob, whatever) and pick "create automation clip". then go to the playlist and manipulate the clip. Hope this helps
HipKnokerZ 1 year ago
Hey man, love your tutorials, ive learnt so much off you! if you havent allready would it be possible to make a tutorial about a basic way to compress kicks and snares to make them louder without introducing massive peaks? its something i am just struggling to master. CHEERS MAN< YOUR THE BOMB!
junez85 1 year ago
@junez85 Now that school is starting back for me, I will be on a better schedule to work on videos. For now I suggest you look up "FL Studio GURU", he has one already on compression. Whatever I will do on video will just be a replica of this, cause this is how I learned :)~. Also look up "NFX" he has wonderful tuts.
HipKnokerZ 1 year ago
@junez85 Dude, check out FLSTudio GURU on compression, that's where I learned.
HipKnokerZ 1 year ago
where did you get the spectrum analizer from? i cant find i anywhere. it must be a seprate plugin?
junez85 1 year ago
@junez85 Look up VOXENGO SPAN
HipKnokerZ 1 year ago
subs 4 sub
kingod615 1 year ago
This has been flagged as spam show
yo , good beat , check out my channel for the dopest underground hip hop beats and emcees
sub if you like, new artists added regularly
peace
newsoundera 1 year ago
does your computer enternal sound card effect you mixing even though i have a usb interface
kayo314 1 year ago
Wow thanks dude for the lesson, this is important for me.
TheMFY 1 year ago
You're music .. reminds me of .. mine ... very nice melody my friend .. keep up the awesome stuf.
banishism 1 year ago
thnx u really helped me ! i needed to mix a beat of mine for a rapper, and it worked great with this tut
pakkoto 1 year ago
i like your take on mixing...
pmthk69 1 year ago
Thanx mate..this really helped..
DjSRL71 1 year ago
but i do assure you that i do have a beat hahaha hell yeah pretty sick mayne thanks a lot for the knowledge and advice
itsMBWAAA 1 year ago
muy bueno el bostezo!!!!!!! Zzzzzzzzzzzzzzzz
inquilinox 1 year ago
muy bueno el bostezo!!!!!!! Zzzzzzzzzzzzzzzz
inquilinox 1 year ago
muy bueno el bostezo!!!!!!! Zzzzzzzzzzzzzzzz
inquilinox 1 year ago
yo nice vid bro ! i subbed . sub to my channel n check out my msic. You really helped me out thanks.
monstaflowmonarchs 1 year ago
@monstaflowmonarchs Pleasure brother.
HipKnokerZ 1 year ago
can some one help me??
i made a track i have a beat which i wanna keep in the center n i have a piano pattern and a dark piano pattern n i want them to be on the opposite side of the surround sound
im not able to do that cause i dont see a different insert on the mixer
can someone plz help me with this??
demonslayer104 2 years ago
@demonslayer104 What do you mean? do you have the three sounds on separate tracks?
HipKnokerZ 1 year ago
@HipKnokerZ its ok i figured it out
thnx anyway i liked the video
demonslayer104 1 year ago
make more these please im trying 2 learn
kayo314 2 years ago
@kayo314 Yeah posting up more from the year, making new ones. for real
HipKnokerZ 1 year ago
Man un consejo, usa Camtasia Studio para que te salgan best los videos, un abrazo y saludos desde Peru.
eric892892 2 years ago
Peruano estupido, el no habla espanol. Sudaca
YogSothothOfGuitars 1 year ago
One of the few videos on YouTube that actually teaches people valuable mixing skills. I see sooo many that are like "Yeah just chuck a Soft Clipper and Soundgoodizer on the Master and she's sweet" and it's scary to think that go and destroy their songs like that. Thanks for putting this up and thanks for knowing what you are doing! ^^
Electrodia 2 years ago
Thanks for the encouragement, again, I only put up what I learned, and I still have alot of learning to do. But I do have 6 years of research so I hope this helps.
HipKnokerZ 1 year ago
the vocaaaoughh.....haha niice viid..thaks!
pupito4709 2 years ago
hey i'm havin a problem when i'm mixing down a beat, i beat an eq on each sounds same as the compressor, and when i wanna listen to the track its crashing. help please
JunOakaDJ 2 years ago
can you upload a video of it?
HipKnokerZ 1 year ago
lol. nigga you need learn how to use limiter / compressor...
kukkapurkkiteam 2 years ago
So why don't you show me how? Like I said, I am not the best. So if you are going to criticize, make the situation better.
HipKnokerZ 2 years ago
haha Good Job that was a gr8 comment and verynice video make more plz THANKS
seeeeether 2 years ago
Intriguing oscilloscope.
X
Xaltus 2 years ago
how do u put each instrument individual on the mixing?
FreshBeatz321 2 years ago 10
what you do is left click on each pattern/instrument(in the pattern stepp sequencer) then a little box comes up with small keyboard and across the top are two boxes with numbers
go to top far right one left click and hold then scroll up or down. You will see the number change. these numbers correspond with the channel on the mixer
do this for each instrument. assign each to different numbers on the mizer
vwalla there you go.. happy mixing
Lambobeatz 2 years ago
OOOORRRRR.... you could click on the instrument button and press control +L lol
HipKnokerZ 2 years ago
lol Im an idiot.. u right...haha
damn I didnt even realize I wrote all that lol
Lambobeatz 2 years ago
@FreshBeatz321 click the sound sample ur using and a box will pop up called channel settings in the top right there is a square cant miss it i think it says fx what ull do is click and move ur mouse up and put it in channel one or whatever u want also ur gonna have to do that to all of em if u havent
Lilsteve191 1 year ago
@FreshBeatz321 just click the rectangle for the channel you want on the step sequencer and press Ctrl+L
eleckson 1 year ago
@FreshBeatz321 just click on the instrument or audio when its in the pattern box thing, then right click on the mixer track you want it in, then go to "link selected channels" and then "to this track"
gonecrazy2166 5 months ago
very helpful , thanks
KarizmatikTheBoss 2 years ago
this is good. I like the tip about the -12. I was looking for a default # to go to.
rene9109 2 years ago
This and the next video are probably the best videos of Mixing in FL on You Tube!
I watched about 40-60...
And if possible record direct from screen with Cam Studio or something... You are a great teacher!
5/5 and Sub! Man keep it going with mastering please...
rema6321 2 years ago
dope, thank you man
treesquirrel77 2 years ago
I just wanna give mad respect to HipKnokerZ for putting this up, Its hard to find these kind of videos on mixing and mastering. And to SillyEagle, sure maybe the beat wasnt as complex as you would like it, but I think the purpose of the video was to mix, not to make the fattest beat that ever hit the interwebs.
ONEyeMarco 2 years ago
Turned off after "I do have a BEAT" and then only strings and bells coming in.
SillyEagle1992 2 years ago
Thank you....Good video make more
sajking07 2 years ago
good video, but not really clear,, maybe you can use a screen recorder;)
hollandheinikenhuis 2 years ago 6
what is the plugin with the spectral line of the sound ? sorry i'm french, don't speak very well english
dementormonsters 2 years ago 3
That's a spectrum analyzer. It's called VoxengoSPAN, I believe.
matt040287 2 years ago 2
good vid i really need alot of help with my mixing game in fl 8
Liteblufootsoldier 2 years ago
very nice. much information! good tips! can you make more videos on mixing?
ntcboay 2 years ago
yo good information keep it coming.
dollarbill2420081 2 years ago
This has been flagged as spam show
I really liked your channel and this video. If you need any help getting this video exposed I use a site called tubeviews.(net) It has really helped like 20 of my main videos get to the top in position. Its nice.
I like what i watched.
Jasminezxasd 3 years ago
do u kno how to mix vocals?
QuoteMe93 3 years ago
I bet the adjustments you made to the snare to get that "snap" will come in handy.
NsaneNtheNbrane 3 years ago
Can you hook me up with the Spectrum analyser plugin?
Nzaonline 3 years ago
google voxengo span and download it for free. Peace.
HipKnokerZ 3 years ago
I enjoyed this video a lot! I am just now getting into FL Studios. I have version 7.0. Can you tell me what version you are using because yours looks a little different from mine. I am trying to find that big meter in mine, but having trouble. Thanks!
~Vince
MakeItFunkyProds 3 years ago
I am using FL 8
HipKnokerZ 3 years ago
Ahhh okay. Makes sense. Your videos are making me want version 8 now.
MakeItFunkyProds 3 years ago
very nice it helped me with my mixing
PlooPlii 3 years ago
Comment removed
PlooPlii 3 years ago
My dB Meter goes over -12 but when I put the volume of the channel down, the dB Meter keeps showing the same. Also when I put the Master volume down, even if i turn of all the volume. What do i have to do?
TyluStylu 3 years ago
do you have any mp3s downloads or a myspace so we could hear what your mix is like? thanks
coMpLekS1 3 years ago
Did you get the link, i think this page aint working right but send me your email ill send it there i tried to post it here peace
Sancho18st 3 years ago
Hey waz up man i watched your tutorials on mixing and the other fl tutorials you have on your youtube channel. I though they were very usefull to me. I am trying to learn mixing,equing and mastering a song. So if you can tell me how like you learned how to do it step by step to what evrything in between means id appreciate it please. I been practising myself too.Also check out my myspace page and tell me what you think.
Sancho18st 3 years ago
Leave your myspace link here. Mixing, equing and mastering is not easy for me to explain. I read a couple of books and been working on it for about three years now. It takes time, no short cuts.
HipKnokerZ 3 years ago
lol damn u made me yawn lol ,,, great video. thanks bro,, those sounds are in FL?> or do you share those sounds?
MOTUDP5 3 years ago
Any sounds that I have either come from fl plugins or samples that I have. Just do a search for sound samples and you will find millions of them, literally.
HipKnokerZ 3 years ago
yo bro, i really wanna thank u for this tutorial cuz now im very clear of what mixing is and more with the fruity loops, this is what i needed. I really appreciated this tutorial. let me get ur email so we could keep in touch cuz i would like to ask sum questions. I mess with everything hip hop, reggeaton, latin rythms everything. but this helped me a lot
elbrondi 3 years ago
No problem, be blessed and look at Nov update!
HipKnokerZ 3 years ago
?1 I layered the pattern
?2 put the fruity db on the master track, then make sure each instrument is on a separate track, then mess with the volumes and see the db meter change
HipKnokerZ 3 years ago
great tutorial mate, two question have u got all them sounds in one pattern? and the other if i use the fruity db i can only seem to change the db down by changing the voloume on the step sequence and if i use the volume on the mixer it makes no diffrence. how are u doing it all by the mixer.
robmajestic22 3 years ago
this is a great help but when i try and turn my kick down, the db metre stays the same so im unable to bring it down to the -12 mark... post back if you can help me... thanks
shimmedia 3 years ago
Track the kick to individual mixer track. Then use the volume slider of the track you just put the kick in. Holla
HipKnokerZ 3 years ago
thanks for the reply... but still nothing, db metre is working but when i turn the kick down it doesnt move down
shimmedia 3 years ago
check the reply I just posted
HipKnokerZ 3 years ago
I would yes, because of two reasons: 1, FL has a mixer that is Virtual, which means what you do on it is what you would do on a real mixer, and 2, you want to control volumes and panning of each individual track to mix appropriately. Now it depends if your analog mixer has many track slides or not, but you get the picture. Grace and Peace.
HipKnokerZ 3 years ago
I want to know something.
If u use a real mixer (table) do u need to put every "instrument" on a track like we used to do on FL ? I mean after 2 years of productions on FL i'm tryin' to start usin' real equipements + FL but I'm missin some infos :( ...maybe the SteveMusic store could help me lol !
drmad21 3 years ago
Damn dude I was getting into that right when you cut it off lol
Nice tutorial though man!
holland151 3 years ago
Thanks for the love bro, grace and peace.
HipKnokerZ 3 years ago
ima suscribe to ur vids cause ur from sc, im from walterboro
hitemup1time 3 years ago
what is that metre fing u brought up on the left?
shimmedia 3 years ago
Its probably the fruity big meter. Helps you see what you are doing lol
HipKnokerZ 3 years ago
great tutorial... what spectrum analyer are you using?
PAssassin 3 years ago
Voxengo Span, it's free too!
HipKnokerZ 3 years ago