Added: 1 year ago
From: ggooch19
Views: 88,266
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (85)

Sign In or Sign Up now to post a comment!
  • I have a couple of questions. I have a 2004 chevy silverado Z71. Where would I mount the unit? How big is it? What kind of maintenance is necessary? What kind of gas milleage increase can I expect? How much is the unit?

  • @Blingem14 ; "Where would I mount the unit?"

    Why in the world would you want to?

  • I just came across on a Canadian news site about vehicles that has been banned,barred and under control in Canada. One is a GMC Sierra that runs on hydrogen gas also using the internal combustion system instead of using gasoline or diesel..chesk it here .......  autos.sympatico.ca/canadiana/8­626/cars-under-government-cont­rol/5

  • We need to have a Hydrogen revolution and take down the oil companies. If everyone wanted to then we could demolish them but unfortunately 72 000 people isn't enough. We must all work together to push the Hydrogen Cell forward by refusing to buy oil. It's expensive, it's dirty, and it's been proven to cause cancers. People like this guy are what we need, more free thinkers that don't conform to the easiest solution of work all day and pay all night. They can't shut everyone up :D just be louder!

  • Be careful man. The last person who tried to stop the fuel companies magically disappeared along with there million dollar ideas. THE FUEL COMPANIES OWN THE FUCKING WORLD. When will people learn that?!?!

  • You don't have to store the hydrogen, it can be burned as produced on demand, it's being done on other Utube videos. A couple of guys proved this as they ran a v-10 dodge truck hydrogen on demand with power to spare. No hydrogen storage, the generator was big enough to produce and meet every acceleration demand the engine can put on it.

  • MY GOD Thank you i have found believers in the same concern i have for this world. You would not imagine the negative press i get from the oil speculators, the share holders & the misinformed. They will not accept the point that oil will run out one day, or become too expensive. I have posted several comments on these so called free energy sites, but to no avail, apart from a few, that hydrogen is one of the ways to go.

  • metal hydride is the storage medium that you guys need  hydride6 deuterium but our damn govt restricts it since they use it in thermonuclear bombs they say you cant use it for any other purpose wich is not the fact

  • What is the half life of this unit? How long should it last?

  • *** SCAM ALERT ***

    HAS BEEN REPORTED TO FBI INTERNET FRAUD DIVISION AND (FTC) FEDERAL TRADE COMMISSION! BEWARE OF SITES THAT HAVE NO PHYSICAL ADDRESS, NO PHONE NUMBERS, NO FULL NAMES, AND NO DIRECT CONTACT INFO!

    IF YOU END UP ACTUALLY GETTING ANY PRODUCT & YOU HAVE A PROBLEM WITH IT, YOU'RE ON YOUR OWN. BEWARE IF THIS SELLER...

    PROCEED AT HIGH RISK!

  • how much for a system for my 351 v8.

  • what gauge wire are you using? I've made my own cell but i'm having issues with the wires heating up and the terminals on the hho cell. Do you have any suggestions? I'm making plenty of hydrogen. Just need to figure out the heating up part. Thanks!!!

  • Where did you get those 20 amp electrical current delimiters from? I need some for my own project and it seems like nobody knows what I'm talking about when I ask for them. What company makes them? What is the technical name for them? Do they have a website or a phone number? I would really appreciate any info you can give me. Thank you

  • I making a double HHO generator but am not going to use sodium bicarbonate ( baking soda) because salt can eat up metal (valves and rings in engines) so Im using water thats been filtered 8 times instead of distilled.

  • Very Pro

    

  • Hej. Please tell me how this works or do you have a link. I have read about HHO gas, but not this dry thing.. How is it generated, what is the electrolyte doing compared to the cell? Give us some info please :) considering getting one. best regards from Denmark

  • Not to be stupid but...what happens if it's freezing out?

  • You all know that all these brute force, useless devices draw way too much current !, which in turn cause the engine to work harder & you guessed it, BURN . . . MORE . . . GAS ! Don't waste your money ! Do your homework, study the technology first and work with pulsed DC with audio harmonics...cell designs are completely different and many times more efficient . . . good luck

  • @vid009

    Like it or not hydrogen is here and it is here to stay. We are all trying to advance the technology and we aren't going to stop because of your negativity. And if these are "brute force, useless devices" then why are they saving us 20-50% in gas. If you don't like what we are don't like what we are doing here stop watching our videos. You are a troll and you need to fined a better hobby.

  • In NW Australia, we have huge tides,

    huge evaporation and huge dry rivers and lakes.

    Tides are up to 12m. Evaporation is up to 4m per year .

    Huge 12m tidal river erosion can revive old dry once mighty rivers, creeks and lakes,

    desalinate the country and change deserts to rain forests to provide more rain across Australia.

    we need more energy, food, land, water and cooler climate,

    Plenty of energy and HYDROGEN TO RUN YOUR CAR environment friendly.

    see: mitic climate engineering

  • This sort of thing should be marketed as a way to convert a gas car into an electric car.

  • can you run a car purely on the hho without gasoline?

  • @anynamewillification

    No. These run off the electrical system of the vehicle in which they are installed. They enhance the combustion of the gasoline or diesel fuel to provide better mileage and more engine power.

  • @ggooch19 So you wouldn't be able to run an engine purely on hydrogen?

  • @ggooch19 nobody has proved that they produce more power. There has been no valid horsepower experiment with these devices.

  • @ggooch19 you can run a vehicle off of only hydrogen, but you will need adequate power to run sufficient stable output. engine modification is retarding the timing of the engine. but overall, you can. ggooch, for a smaller unit, that is a nice trio there.

  • Gasoline's chemical make-up is Hydrogen and Carbon. Your vehicle actually runs off of Hydrogen already. When you take your vehicle to an emissions testing facility, one of the 5 gasses they look for (from your exhaust) is "HC" Hydro-Carbon. What HC means to an emmissions tester is that there is "unburnt fuel".

    This could mean a number of things; air/fuel mixture is too rich (rich = more fuel than air), a bad catalytic converter, or no cat.

    fun fact: 14.7/1 is the generally desired A/F Ratio.

  • I wonder if having your water close to boiling temp would reduce electricity (using ambiant engine heat of course)?

  • one problem i see old metal clamps on plastic connections beside that nice design and good HHO output

  • @joesee672

    Those "old metal clamps" are stainless steel.

  • "So that all my friends can make fun of me."

    >Impling he has friends.

  • Search YouTube for "Dateline NBC - HHO scam"..you will be amazed

  • @triden55 your first problem is believing dateline! Do you think the people that own the media giants want regular people like you and me to not have to buy gas from their buddies in the oil industry? The mass media lies to you constantly.. open your eyes!

  • @0p3nURiZ Why isn't there one single person posting a quantitative dyno run proving that it saves a few MPG? Not one single person has been able to prove that it saves money..and thats part of the problem. Why can't any person "prove" (with numbers) either in a lab or on the dyno that it actually works. This so called HHO invention is a novelty item and always will be. You don't don't see anyone with a physics or chem degree making these things...only rednecks looking for a cheap way out.

  • @triden55 The reason you dont see anyone with any credentials making these things is because they are afraid of ruining thier career. The oil companies have enough sway to supress this info and call anyone who believes in it a nut job so that people who are seriously considering researching it will steer away in fear of tarnishing their reputation. Why dont you buy one and test it yourself if your such a sticker for proof.. then you can debunk it without having to run on speculation!

  • @0p3nURiZ The reason I debate is because I have made these things years ago and I know what little amounts of fuel that they produce. I also know how much energy goes into producing such little fuel. All I am asking is that one person stick it on a dyno and prove it once and for all that it saves a few MPG...why can't it be done? Surely it won't ruin your career. They are absolutely no valid quantitative conclusions to this kind of MPG boosting as it stands.

  • @triden55

    Thats a little unfair, 20 years ago a friend of mine ran his diesel van on old chipshop waste fat, everyone called him a nut. Saved him a fortune here in the UK.

    These people are taking on the largest most despicable conglomerate ever known to man, Standard Oil.

    Ask a doctor to admit publicly that vaccines and Fluoride are poisonous.

    Ask a dentist to say that Amalgam (Mercury) is a neurotoxin.......you see my point

  • @deadrebel2 I don't think the oil companies are to worry. If they were scared they would be shutting down GM when they release their Volt...Tesla would also be long gone. You surely can't be scared that the oil companies are going to kill you if you can do a valid unbiased experiment to try to prove the results? I just wish one of you guys would try it yourself honestly to see what happens. I have done my own tests and they didn't come out to benefit the fuel mileage.

  • no one seems to know the limit of hydrogen you can put in a car before it effect the timing?

  • @frank0067 just change your timing and drive on

    i am interested to know that as well....

    i bet i am going to find out .... let you know when i do

  • this is amazing...

    

  • @thedecagon

    Capturing hydrogen and safely storing it in a tank is a problem scientists the world over have been wrestling with for many years.

    If you have any success in the effort, let us know. We would like to invest in your venture.

    Gordon

    support@hydrogenator.us

  • @ggooch19 hey RETARD, it stores real safe, in WATER FORM, a water splitter splits it as you need it ASSHOLES

  • After watching it again, I'm amazed you have a life span of 10,000 to 12,000 hours for this module. So running non stop 24/7 it will basically go for 18 months or close to. Thats bloody impressive mate concidering the cost, and that will drop dramatically when mass produced. Good luck with what could become beneficial to all. I'm rooting for you mate. Great stuff!!!

  • Any chance of making an oven which runs off of this tech? Just thinking of home use and savings to be had, not just on the road. Heating of any kind with this tech would be a great thing to mankind. What are the chances?

  • @SJB666 chances are good.

    get this....camper refrigerators work off heat......

    so we could cool our homes as well

  • Will be interesting when you get a 24 volt version working. As there are a fair few 4x4's getting around using 24 volt systems. I want to see it bubbling like a spa bath :D. Perhaps a fuel cell/tank that it could be stored into under pressure would be a good thing. But yer I understand that hydrogen is one serious gas to store under pressure, but hopefully there is a safe solution. Gimme 24 volt setup 6 cells and I'll be cookin with gas...

  • DO THESE UNITS WORK ON DESILS. FORGIVE MY SPELLING,

  • @MollydogRadar

    Yes, Molly. These Hydrogenators work on any internal combustion engine.

    Check our different models on hydrogenator.us

  • @MollydogRadar I had 3 running on my car. I produced 750ccs of HHO a minute. I ran 11000 miles in 9 months and it makes absolutely no repeat no difference to the mpg. It will draw a huge amount of power from the alternator. Do not believe this will work. It doesn't. I know I tried it.

  • WE suggest that our customers use the Hydrogenator for awhile before investing in an EFIE or O2 extension collars. All vehicles don't need an EFIE.

  • @ggooch19 It is possible to collect the extracted hydrogen gas and keep them inside a high pressure tank?and attach the tank into the machine?

  • @thedecagon you can buy 100% hydrogen from your welding supply store. its stored in the bottle @ around 2000 psi 194 c feet of hydrogen. google it if you like

    and they sell the regulator for using as a torch or the like....

    i am going to get one just to experiment with. seperate the HH from the O with magnets or membranes, then store it in a steel bottle

    good luck

  • WE suggest that our customers use the Hydrtogenator for awhile before investing in an EFIE or O2 extension collars. All vehicles don't need an EFIE.

  • @ggooch19 everyone needs to remember.......

    o2 senser and efie tampering is ilegal in some states....

    saving gas could get you saving rent as well........jail

    but yes i say throw all that worthless fuel injecter crap in the trash. start off with putting a carberator on that machine. then pipe in the HHO

  • What are you doing with the O2 sensor?

  • looks like a meth lab 0.o

  • If you are using three of this cell on 20 amps it should run a modified car engine without gasoline.

  • First, it is a good design. There are 3 cells. Each cell draws 20 amps maximum. Multiply it by 3 will equal to 60 amps. For the total wattage multiply it by 13.5 volts. The entire unit will be using 810 watts.It is one horsepower.Then after we mixed the HHO gas produced to the intake manifold, is there gonna be a gain or a lost of power? An answer will help resolve the general question wether these HHO boosters really works or not. ( Regards to all YOUTUBERS )

  • @HHOhybridBuilder ;

    Your calculations are meaningless. Studies from many universities and professional engineers show clearly that they work. The only way some skeptics will finally get the message is to install one. Then you'll have the very real problem of explaining exactly how they DO work. Many engineers and scientists worldwide are debating that issue.

  • @ggooch19 Ok then I will install one.Hopefully I can help to solve this, because skeptics were sick and tired of this issue.

  • @ggooch19

    That's a pretty brash thing to say, that would mean all the physics and chemistry classes I've taken, and all the literature I've read is innacurate. Of course we know that is not the case.

    I don't believe that many scientist or engineers worldwide are debating anything like this, though there is a lot of debate by youtube users, but we aren't scientist, and those of us like me that are headed in that general direction aren't experts yet.

  • @x65535x Thank You

  • @HHOhybridBuilder Ever heard of a pulse width modulator? You can control the current. By stacking your cells in series and hitting them all with the same voltage, not multiplied by the number of cells, you will achieve more gas at whatever amperage you desire. Regardless of the amount of electrolyte to water ratio. Peace!

  • @jab0805 ( THANKS ) I always use the OHMS LAW everytime I worked on electrolysers and I found out it ended up always the same regarding amperage,voltages and resistance regardless if it is series or parallel connected. But I never use a PWM. Maybe I should try one and see the result. ( Regards, HHB )

  • this is awsome you did a gret job...do u selll these or can u show how u put one together....thanks

  • @brandon12084

    Sure, we sell several models of the hydrogenator at our website listed on the face of the video.

  • This is perfect to run a 500 watt portable generator for electric car to charge the battery.

  • One of the best design I've seen in YouTube, "greate job" HHO man.

  • That aught to get that damn RODENT ! lol

  • meatwad..lol

  • lol this guy sounds like meatwad.

  • @tictalkopenup What???

  • I like your video's and would like to know the manufacturer of your inline De-limiter. It appears to have yellow 10gage wire on it. Thanks

  • cool i like it

  • I want one!

  • now those are some nice dry cells

  • And how would one go about ordering?

  • How much dose the small unit cost?

  • Super neat. HOw about a website link so I can see some price listings?

    So far the cheapest drycell unit I have seen online was an unassembled 13 plate system for 40. Bubbler chamber not included.

    So yeah thats as low as I could find but your triple system looks interesting too. So how about a link in your description?

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more