great work.. i heard you say that the pump is too powerful for the 2 plate system, but if you T-into the pump output, you could run a second 2 plate system as well. Or even another plate doing the same thing from the other side too...? oh, and dont point the spray up, up or you'll probably make a mess or/and get water in the gas output tube.
DANGER!: Attention HHO people using LECTROLYTES!!!!!
Electrolyte systems are nothing more than electroplating units. They are NOT Stan Meyers systems. Yes they produce Hydrogen, but they also produce, CO2 and trace other gases due to the electrolyte. THE USED WATER IS POISONOUS! DO NT DRINK IT! DO NOT THROW IT OUT IN THE BACKYARD! IT IS TOXIC AFTER ELECTROLYTE IS ADDED. BE CAREFUL HOW YOU DISPOSE OF IT! STOP USING ELECTROLYTE AND LEARN HOW THIS PROCESS IS SUPPOSED TO WORK CLEANLY.
Interesting! Would it not work better to pump upwards from the bottom provided that there is a method to prevent it from pumping all the water out of the system through the gas outlet? Just how would one prevent that though? I don't know much about these, but it is just a thought.
Filter your water and always leave the negative hooked up, you will get more energy out of a negatively charged cell, leave the white powder build up on your cells, they are superconducting ions that will aid in the implosions from the HHO and the explosions from your gas.
thanks for the info, i cant wait to work on my cells again, i just got a new job, moved 3 hours away and plan on buying a house in 3 months. I got big plans for future experiments.
Hey Plug, love the tubes...that is one MONSTER cell!
That pump looks like it could power a small motor boat!
Keep up the tube work...I have always been curious if the tubes were the key to Meyers design or if the PWM helped, or if it was the combination of the two.
My best is 500ml a min from my other cells, this one looked maybe around 250ml a min. When I ignited the bottle, the "pop" didnt seem as loud. Still more tests needs to be done.
from what a read, if your running on straight hydrogen you need to retard the timing, if running as a hybrid the gasoline and hydrogen mix should run without needing adjustments. I would find the manual for the engine to see how to change the timing
Okay ! . I never play whit timming ... thank's for the information about timming ... i can have more or less of 47 l /hour... it depend of my water ;) distillated water produced a lot more HHO than normal water with mineral ( is it normal ?) ... sorry for my english ...
i havent tried distillated yet, today i added 3ml of muriatic acid to a medium size coffee cup of water and did a quick test and got an insane reaction when I added power to 2 small tubes. Im going to do a clean test in my pump cell and record the data.
And nowadays you can buy these little gadgets that replace oldschool ignition things ...maybe getting one of these is helpful ...I think these things figure out their own timing
great work.. i heard you say that the pump is too powerful for the 2 plate system, but if you T-into the pump output, you could run a second 2 plate system as well. Or even another plate doing the same thing from the other side too...? oh, and dont point the spray up, up or you'll probably make a mess or/and get water in the gas output tube.
colbydrags 1 year ago
DANGER!: Attention HHO people using LECTROLYTES!!!!!
Electrolyte systems are nothing more than electroplating units. They are NOT Stan Meyers systems. Yes they produce Hydrogen, but they also produce, CO2 and trace other gases due to the electrolyte. THE USED WATER IS POISONOUS! DO NT DRINK IT! DO NOT THROW IT OUT IN THE BACKYARD! IT IS TOXIC AFTER ELECTROLYTE IS ADDED. BE CAREFUL HOW YOU DISPOSE OF IT! STOP USING ELECTROLYTE AND LEARN HOW THIS PROCESS IS SUPPOSED TO WORK CLEANLY.
RagingCaveman 3 years ago 2
what are you talking about?
I drink it everyday with my breakfast.
h2oreactor 3 years ago
Interesting! Would it not work better to pump upwards from the bottom provided that there is a method to prevent it from pumping all the water out of the system through the gas outlet? Just how would one prevent that though? I don't know much about these, but it is just a thought.
BIGINSF 3 years ago
Good job, I doubled my fuel mileage.
Filter your water and always leave the negative hooked up, you will get more energy out of a negatively charged cell, leave the white powder build up on your cells, they are superconducting ions that will aid in the implosions from the HHO and the explosions from your gas.
1gunner1000 4 years ago 2
thanks for the info, i cant wait to work on my cells again, i just got a new job, moved 3 hours away and plan on buying a house in 3 months. I got big plans for future experiments.
MrPlug 3 years ago
Imagine this!
skagitt 4 years ago
Great work , I like your style
sn1pe352 4 years ago
This has been flagged as spam show
jjhtjkjkkkjjfu8khhjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjhhhhggngggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
jesusloverof2006 4 years ago
resjsaoirejgaerijgierjger!!!!!!!!!wrkgemgerkg
ergergERgsergsreg!!!!!!ergergererrggeeeeeeeeeeeeeeeeeeeeeeeeeeee
!!!!!!!!!!!!!!!!!!!
MrPlug 4 years ago
are you using any kind of a pulsing unit?
Potatogunman 4 years ago
nope, i haven't dedicated time to doing that, look up ZeroFossilFuel, his lastest cell is doing very well.
MrPlug 4 years ago
hmmm ok.....interesting
Potatogunman 4 years ago
for cooling?
Potatogunman 4 years ago
moving fresh water in pipes to try and speed up the process of creating the gas
MrPlug 4 years ago
i dont understand the purpose for the pump?
Potatogunman 4 years ago
please give me a rating for my " hydrogen cold fusion free plasma electrolysis Reactor "
thanx HWOOD----I gave you 5*****
holywdtughguy 4 years ago
watched your vids a couple weeks ago, what kind of camera were you using? *****!
MrPlug 4 years ago
sony HD FX-1........ya its nice!!!!!!!!!
holywdtughguy 4 years ago
omg nice, i love cameras, its a big investment though, ive been eyeing the Canon XL1s and above.
MrPlug 4 years ago
Hey Plug, love the tubes...that is one MONSTER cell!
That pump looks like it could power a small motor boat!
Keep up the tube work...I have always been curious if the tubes were the key to Meyers design or if the PWM helped, or if it was the combination of the two.
mrjamestferguson 4 years ago
My best is 500ml a min from my other cells, this one looked maybe around 250ml a min. When I ignited the bottle, the "pop" didnt seem as loud. Still more tests needs to be done.
MrPlug 4 years ago
with my cell i have 47L/hour .. do you think I can run an engine ( down of 100cc) ?
yanlapanic 4 years ago
not sure till you try, thats good output though.
MrPlug 4 years ago
last time i tried to start my engine , it do a big explosion ... it because of the timming !? do you know how to adjust this ?
yanlapanic 4 years ago
from what a read, if your running on straight hydrogen you need to retard the timing, if running as a hybrid the gasoline and hydrogen mix should run without needing adjustments. I would find the manual for the engine to see how to change the timing
MrPlug 4 years ago
Okay ! . I never play whit timming ... thank's for the information about timming ... i can have more or less of 47 l /hour... it depend of my water ;) distillated water produced a lot more HHO than normal water with mineral ( is it normal ?) ... sorry for my english ...
yanlapanic 4 years ago
i havent tried distillated yet, today i added 3ml of muriatic acid to a medium size coffee cup of water and did a quick test and got an insane reaction when I added power to 2 small tubes. Im going to do a clean test in my pump cell and record the data.
MrPlug 4 years ago
ok , i do not understand all but ... it ok
yanlapanic 4 years ago
yea bad, unsafe
MrPlug 4 years ago
And nowadays you can buy these little gadgets that replace oldschool ignition things ...maybe getting one of these is helpful ...I think these things figure out their own timing
hoekf 4 years ago
Yan la Panic, what kind of engine is it?
hoekf 4 years ago
honda 4 stroke ... 75 cc from an Xl75 . see my video . ;) you will see
yanlapanic 4 years ago
If it has no electronic motormanagment you should be able to change the timing by hand....
hoekf 4 years ago
Okay but I will not try . I dont want to broke my engine .
yanlapanic 4 years ago
47 liter is fantastic!
hoekf 4 years ago
yes but I have heat problem too ;) it's comming with the big quantity of HHO
yanlapanic 4 years ago
have you measured your gas output ?
hoekf 4 years ago