You call that a big gun? My S&W 500 Magnum laughs at your little .454casull. I guess at your age this is as big as you want to go or else your brittle old bones might shatter. :)
I was thinking the short barrel would make performance suffer, but a couple of sites out there say they only see about a 200 fps loss between the short barrel and the 7.5" one. With big, hard-cast bullets, that shouldn't be a big problem if you're thinking of using one of these for protection while camping (especially since you'd be using it at short range). I mean, a 360 grain bullet at 1500 fps is pretty scary stuff!
Come on Pete. It is not immature to buy things like that. It is the American way dude. It's the Economy and expendable income. I have been trying new sights on my Glocks, 3-dot night sights on my Glock 22 and XS- bar dot on my Glock 26. Also did the ghost tactical setup on them, verry nice and fast reset! Lookin at a Ruger Sp101 and also the Alaskan 454 cassul. Let us know how the recoil is on that bad mother. Look's brutal!
Very nice i was looking to get the taurus raging judge full size because im not alowed compact guns were i live in canada with my licence :( they put them in the prohibb class in 91 when i was born:p super lame
I'm not a 1911's guy so those vids while fun don't do much for me. However I truly start to hate your guts when I see vids like these. Between the Alaskan and the Sig 226 Stainless Steel vid I find myself having feelings I haven't had since I was 8 and seen Ginger from Giligan's Island walk around in tight dress knowing I couldn't touch thru the TV. I hate you so much right now....well time to check my bank balance again and flip a coin.
I first saw this gun in the movie faster with Dewayne Johnson aka the Rock. That gun is freakin bad ass brother. I'm glad you showed this on your channel.I hope to buy one soon!!
Pete, i am not a gun expert. But if i asked you whats the best gun manufacturer? and u had to answer right away (like a gun was pointed at you) Just for fun :)
Congrats Pete, just picked one up last week but it is the .44 mag version. Just couldn't find the 454, but I'm super happy with it. Can't wait to see you shoot it.
That scratch you mention is still there and it's friggin huge! It's visible @5:41. Also, I wouldn't call that a scratch, that's a gouge. I don't think this can be easily buffed out. If I were buying, I'd ask for a big discount or get not buy at all.
@SonsOfLiberty65 Right. But that's the scratch (a gouge really... too deep to be a scratch). That line shouldn't be there.
It's really hard to fix that yourself... you need to precisely grind a fair bit of metal (few thousands) and grind it off so it's flat because it will reflect the light wrong if it's concave.
I wouldn't touch that myself... that should be sent to Ruger.
@supermaucat i just got back from my gun shop and looked at the alaskan in 44 mag and 454 and they both had that line that arches above the trigger. Im picking up the 454 alaskan tuesday and ill make a video. maybe we are looking at two different lines?
@theARMORYchannel In the closeup of the gun, there is a line that is supposed to be there (underneath where you said the gouge was). I think that is what supermaucat is looking at.
@theARMORYchannel Congratulations for your new handcannon Pete! You did a good job deleting that scratch, but the sandpaper you show us it's suppose to be use wet. Wet 2000 over wet surface with small circle movements, wash it on every 10 seconds and it will become just like your other high polshed one, or you might just brush it with bronze round brush on slow motion dremel tool. anyhow, i wish you good luck on the range video. Revolvers are addiction for life.
@theARMORYchannel Lol, he thinks the line for the trigger assembly is a gouge. You'll find those on EVERY Ruger revolver! By the way pete, I got my Birchwood casey lead remover today, it worked fucking amazing on my GP100, thanks for the suggestion bro.
It's amazing how much more oomph the 45 Casull has compared to the 45 Colt with just a tiny bit of increase in length. Shooting the 45 Colt out of my S&W XVR felt like a 22, but the Casull felt like it had twice the powder. Is the 454 painful to shoot out of the Alaskan?
I like the way you kick yourself in the ass for doing stupid shit. I do the same thing. But you know what? We get shit done one way or another come hell or high water. There are very few people that have the integrity to admit screw ups like giving away your damn ammunition! When I sold my piece of shit Taurus LCP.380 I gave away three boxes of ammo with it. I took 200 bucks for it just to be rid of it. Then I got the Bersa Thunder .380. Guess what? NO F'n AMMO!!! I had to buy MORE. Live and Lrn
Pete, the definition of insanity is doing the same thing over and over again and expecting a different result! Stop selling ammo bud, you're going insane!
@NurseMan1911 He's not selling it. He gave it away with the gun like my stupid ass did when I sold my Taurus LCP .380 (3 Boxes). I got a Bersa Thunder .380 (one month later) and had to buy ammo all over again. My primary carry weapon is the Springfield XD .45 Tactical. Yeah, it's big, but it's GUUUUD!!!
I called Ruger asking about that pin.. the person I got on the line didn't know anything about it. Obviously if you got it and me too, it wasn't a fluke and obviously has a purpose.
Also, did you notice how the left side of the barrel now just says 'Read instruction manual' on these new Rugers? The old ones have a whole paragraph of legalese!
BTW: You can dremel that unflattering warning manual scroll off the Ruger Stainless then flitz it out. Makes that insulting, defacing sentence go away. Like its never been there!
Fucking sweet Pete. I just bought one in .44 mag for Bonnie, this was her dream gun. Tomorrow is our 15th year wedding anniversary, and I'm taking it to the range with her police issue glock 22 that she wanted. I'm going to shred some targets and shed some tears.
A W E S O M E!!!!!! I love your original vid on this revolver (Hungry Man / Hellboy)! Makes my .41mag PC657 look like a little baby!!!! I would love to see ya shoot some 454 through though, holy damnation!!!! If I had this this I'd probably just shoot 45lc only. hahahaha. oh and I love the smell of the "Lead Remover" cloth! It works well on stainless but not so sure on bluing. Awesome vid!
That pin is for the main spring strut - when you remove the grips, cock the hammer, there is a hole in the strut for the pin. You can then lower the hammer, remove the strut/spring assembly, remove the hammer pivot pin, remove the hammer, and remove the trigger group assembly.
Pete, go to moonclips (.) com - you can get your Alaskan's cylinder machined for Moonclips, so you'll be able to shoot 454 Casull, 45 Colt, 45 ACP (with moon clips), 45 Auto Rim, and 45 Schofield all in the same gun.
It only costs 100 bucks. Your fat ass spends more than that on fries each week at McDonalds.
Badass revolver Pete! Hey I was wondering if you could recommend a steel guide rod for my G21 gen3? I really like the channel man. I've learned a lot.
That is a beast, glad you got it back. Honestly dudee you should give the desert eagle another shot. You are the ONLY person i know who didn't have a good experience. Mine runs like a god damn swiss watch.
@theARMORYchannel Technically, he's correct. This is apparent because there is no .45 "Short" Colt. The .45 Colt was unofficially designated the .45 "Long" Colt to prevent confusion with the shorter .45 Schofield.
That pin is indeed for the mainspring housing; there should be a section in your manual reagarding detail stripping the weapon, or at least there is in the SP101 manual. :P
The pin is so u can take down the main spring... Just cock the hammer, when the whole on the bottom of the spring is exposed then place the pin inside the whole... Hold it there then gently let down the hammer... Wahla the spring will come right out...,
Pete, if you have a bench grinder you can buy buffing wheels for it at Home Depot. In the same area they sell 1 inch tubes of grey and red paste to use with it. The grey is emery paste and the reds is jewelers rouge. Swap off your grind wheel for the buffer, when its spinning hold the grey paste up to it, load the buffer and then buff your gun. It works so good if you stay in one place too long it emery paste will buff off stamped lettering. Then switch to the red for mirror finish.
@theARMORYchannel I have been thinking of buying a revolver but I dont like the small ones... I love the bigger ones like the super blackhawk HUNTER!! lol!!
Ruger is so badass i wouldnt even know where to start. Every time we get a shipment from them my day is made. Starting with the MKIII up to the P9 lined by a whole galaxy of satin finished revolvers and not to forget the variety of 10/22s with the new BX25 magazine that fits as well to the SR22. Or how about its bigger brother the SR556 and my new personal favorites the mini-14 and 30 ( i wonder if that 14's ATI-Stock fits on the mini 14). This Brand is just hard to resist
@theARMORYchannel no wonder. i had some versions of it in my hands last year and even if i havent shot one yet i instantly liked how it felt and how unique its engineered and styled. except for the fluted barrels i'd rather go for the fat mean-looking match barrels even if its not neccesary at this barrel-length or cal. not exactly .454 btw Magtech sells the 454 as handgun hunting cartrige :D. Hellboy ... that name fits it
I trade constantly, and do the same damn thing. I had four 9mm's this year, and every time I trade it for a different caliber, I give the ammo away for extra boot.
@Nicho2177 umn i boxed about 50 Bottles (a 500ml) of it today for a shipment..and i made sure all of them had the nozzel attached.To bad they werent ment for export, i havent seen the export-can design from up close yet. Our cans Ballistol-Cans are in the classic german red white green design. But Hell from time to time someone even orders the 5 liter cannister far enough to drown in it :D Anyway i wonder if it would be cost effective if you order that stuff over here.
PS: If you want that gun to really look sharp give the cylinder, trigger, and hammer a high polish and then bead blast the body of the gun. It looks awesome that way.
Pete, glad u got the Alaskan back. Been wanting one for awhile, was also thinking of a .44 mag snubby to carry. However, I am doing some hand loading with a buddy. I could load .45 LCs up to .44 mag power and use them instead, the frame will certainly handle it, and can use 454s if needed. Best of both worlds and can get by with just one gun.
Damn, look at the crowning of the muzzle on that bad boy! I'm drooling! Because there is so much metal, it looks like a decorative piece/fine piece of machinery.
Pete YOU R DA MAN! Your expertise' with metals, and gun finishes was extremely informative! Thank you! And I have to point out that I LAUGHED MY FUCKING ASS OFF when you talked about spell check, and how every word in your sentences has red underling it AHAHAHAHAHAH! Thumbs up bro! I love seeing this channel grow since your 5th vid!
I make the same ammo mistake myself when I get rid of guns sucks...Always wind up getting the same caliber in something else later on lol. Sweet pick up bro
I have that Bad Ass Casull too, I heard it shoots a little more than just .454 and .45 long colt.... Do you know if it takes any other type of .45 round??
That's a tits as hell pistol Pete. Ha, I made a funny ('Pistol Pete'). I may be transferring to Alaska & this may be a wise purchase for me. I'm thinking the .454 Casull shouldn't have a problem stopping a bear. ? Anyway, I would LOVE to see vid of you shooting this beast. lol
@thearmorychannel i totally copied you! im picking up mine Tuesday. How is the recoil? does it really hurt? i had bad dreams about the recoil last night lol
You call that a big gun? My S&W 500 Magnum laughs at your little .454casull. I guess at your age this is as big as you want to go or else your brittle old bones might shatter. :)
TheYankeeMarshal 1 hour ago
What is up with Mr. Twinkie?
kkklot42 4 days ago
BEAST! I Love that gun! glad you got another!
elw619 1 week ago
Bad ASS Brother..
SouthernGunz 2 weeks ago
that's not a scratch you guys are seeing it's where the trigger housing meets the rest of the gun.
automatic151 2 weeks ago
Comment removed
skywalkermix 2 weeks ago
I want one of these for my first revolver i love it
treblarefils 2 weeks ago
I was thinking the short barrel would make performance suffer, but a couple of sites out there say they only see about a 200 fps loss between the short barrel and the 7.5" one. With big, hard-cast bullets, that shouldn't be a big problem if you're thinking of using one of these for protection while camping (especially since you'd be using it at short range). I mean, a 360 grain bullet at 1500 fps is pretty scary stuff!
roentgen571 2 weeks ago
Hey just letting u know they do make 45 colt in the critical defense line of ammo n u could use the leverothion in it also
WickedKlown10mm 2 weeks ago
DONT EVER LET IT GO AGAIN!!!!!
90tpi 3 weeks ago
when do we get a range vid on this beast with hot .454 loads pete??
fordxbgtfalcon 3 weeks ago
Damn Pete, that is awesome!
Kabar8315 1 month ago
That is one sick looking gun!! Huge and obnoxious, you shouldn't talk about yourself that way Pete, I think your Moobs are just fine!!
Rogerthat5x5 1 month ago
Glad you got it back GREAT vids keep them coming!!
Gunpowderhandshake 1 month ago
Come on Pete. It is not immature to buy things like that. It is the American way dude. It's the Economy and expendable income. I have been trying new sights on my Glocks, 3-dot night sights on my Glock 22 and XS- bar dot on my Glock 26. Also did the ghost tactical setup on them, verry nice and fast reset! Lookin at a Ruger Sp101 and also the Alaskan 454 cassul. Let us know how the recoil is on that bad mother. Look's brutal!
harpoclarx 1 month ago
Very nice Pete. The Alaskan is just a sexy looking gun.
prchico520 1 month ago
Very nice i was looking to get the taurus raging judge full size because im not alowed compact guns were i live in canada with my licence :( they put them in the prohibb class in 91 when i was born:p super lame
snowboarder450 1 month ago
Nice revolver! When are you going to get an M1 Garand?
nebulabass 1 month ago
Bad ass
Rock3t138 1 month ago
★★★★★
NICE!!!!!
TheMultiGunMan 1 month ago
Sweet gun man!
Dexter011S 1 month ago
@supermaucat, that line your looking at isn't the one he was talking about. That's not a scratch, its part of the frame.
vizzo93 1 month ago
A grizzly bear stopper.
TheCoroncachannel 1 month ago
Watch The Transporter... the main character is seen holding it for a few seconds and it looks MASSIVE in his hand...
TheOl1911 1 month ago
Pete, did Cabela's give you any discount since it was scratched at the get go?
GunSmokeGuy 1 month ago
Glad you got another one!
TheGunfighter45acp 1 month ago
I'm not a 1911's guy so those vids while fun don't do much for me. However I truly start to hate your guts when I see vids like these. Between the Alaskan and the Sig 226 Stainless Steel vid I find myself having feelings I haven't had since I was 8 and seen Ginger from Giligan's Island walk around in tight dress knowing I couldn't touch thru the TV. I hate you so much right now....well time to check my bank balance again and flip a coin.
jmce3 1 month ago
Sweet looking Ruger . Good video.
mgiaco52 1 month ago
Thanks for the help Pete!
GRIZZY357 1 month ago
That gun gives me a chubby. Great buy Pete
ML87SC8807 1 month ago
I first saw this gun in the movie faster with Dewayne Johnson aka the Rock. That gun is freakin bad ass brother. I'm glad you showed this on your channel.I hope to buy one soon!!
glock19gen4 1 month ago
I don't see a scratch ...
hazman440 1 month ago
nice
heckathornmike86 1 month ago
IT DOES NOT SHOOT .410 YOU NEED SOMETHING THAT SHOOTS .410 LIKE THE S&W GOVERNOR
wauguxx 1 month ago
@wauguxx the Governor is a sweat gun
theARMORYchannel 1 month ago
Now thats a real mans gun.
aksuperhero 1 month ago
hey man love your channel and man i can't find that damn Ballistol! can i buy some from you?
XGCPR3D4T0R 1 month ago
I remember the first time I was shot out of a cannon.
ebomey 1 month ago
dont eat the rag! lol
prikasky 1 month ago
Pete, i am not a gun expert. But if i asked you whats the best gun manufacturer? and u had to answer right away (like a gun was pointed at you) Just for fun :)
my guess is Ed Brown?
cschmiedlechner 1 month ago
@cschmiedlechner no idea bro,thats like asking what the best ice cream.
theARMORYchannel 1 month ago
@LargeCheesePizza nutnfancy is a fag pete is the man
SonsOfLiberty65 1 month ago
that gun is sick brother! i honestly never heard of it until now
leftyaa12 1 month ago
i really am not a fan of revolvers, but that is a badass fuckin revolver
fuckinmetal1982 1 month ago
@fuckinmetal1982 me 2 i had to have it
theARMORYchannel 1 month ago
@theARMORYchannel yo about how much does one of those go for its beautiful
TheSickman99 1 month ago
Congrats Pete, just picked one up last week but it is the .44 mag version. Just couldn't find the 454, but I'm super happy with it. Can't wait to see you shoot it.
guzz95 1 month ago
real friggin nice gun ...I hope to own one but that will be a long time comin
tylerwhale666 1 month ago
YO Pete,
That scratch you mention is still there and it's friggin huge! It's visible @5:41. Also, I wouldn't call that a scratch, that's a gouge. I don't think this can be easily buffed out. If I were buying, I'd ask for a big discount or get not buy at all.
supermaucat 1 month ago
@supermaucat i thought that was the scratch too but if you look closely that line arches around the trigger,
SonsOfLiberty65 1 month ago
@SonsOfLiberty65 Right. But that's the scratch (a gouge really... too deep to be a scratch). That line shouldn't be there.
It's really hard to fix that yourself... you need to precisely grind a fair bit of metal (few thousands) and grind it off so it's flat because it will reflect the light wrong if it's concave.
I wouldn't touch that myself... that should be sent to Ruger.
Shame really because it's a new gun.
supermaucat 1 month ago
@supermaucat i just got back from my gun shop and looked at the alaskan in 44 mag and 454 and they both had that line that arches above the trigger. Im picking up the 454 alaskan tuesday and ill make a video. maybe we are looking at two different lines?
SonsOfLiberty65 1 month ago
@supermaucat it gone dork! get some glasses
theARMORYchannel 1 month ago
@theARMORYchannel In the closeup of the gun, there is a line that is supposed to be there (underneath where you said the gouge was). I think that is what supermaucat is looking at.
GetCookingNow 1 month ago
@theARMORYchannel Congratulations for your new handcannon Pete! You did a good job deleting that scratch, but the sandpaper you show us it's suppose to be use wet. Wet 2000 over wet surface with small circle movements, wash it on every 10 seconds and it will become just like your other high polshed one, or you might just brush it with bronze round brush on slow motion dremel tool. anyhow, i wish you good luck on the range video. Revolvers are addiction for life.
BobbyMagnuma 1 month ago
@theARMORYchannel I think you're the one who needs them, dork.
supermaucat 1 month ago
@theARMORYchannel Lol, he thinks the line for the trigger assembly is a gouge. You'll find those on EVERY Ruger revolver! By the way pete, I got my Birchwood casey lead remover today, it worked fucking amazing on my GP100, thanks for the suggestion bro.
MikeReiner 1 month ago
@theARMORYchannel I think he's looking at the join line between the trigger guard and frame and mistakes it for a "scratch".
Ultratron100 1 month ago
@supermaucat ??? What gouge??That gun looks perfect!
OfficerTG 1 month ago
Good choice man.. Good to see it back
007bondson 1 month ago
Thats an awesome ruger bro! enjoy it
bigmike11214 1 month ago
Youtube it? Why dont you make a shooting video?
Nefarious79 1 month ago
@Nefarious79 i have 33 shooting videos dude, look at my play list
theARMORYchannel 1 month ago
@theARMORYchannel And Ive seen most/if not all of them...I was referencing your comment in this video of the fireball from the 454/45LC
Nefarious79 1 month ago
Dude, i love that revolver! Had my eye on it for a while now myself. great vid man, keep em com in
CarmineZDA12NV 1 month ago
It's amazing how much more oomph the 45 Casull has compared to the 45 Colt with just a tiny bit of increase in length. Shooting the 45 Colt out of my S&W XVR felt like a 22, but the Casull felt like it had twice the powder. Is the 454 painful to shoot out of the Alaskan?
geishpmp 1 month ago
I like the way you kick yourself in the ass for doing stupid shit. I do the same thing. But you know what? We get shit done one way or another come hell or high water. There are very few people that have the integrity to admit screw ups like giving away your damn ammunition! When I sold my piece of shit Taurus LCP.380 I gave away three boxes of ammo with it. I took 200 bucks for it just to be rid of it. Then I got the Bersa Thunder .380. Guess what? NO F'n AMMO!!! I had to buy MORE. Live and Lrn
noelsingletary 1 month ago
This has been flagged as spam show
Nice one bro-!
I hear you about running out of money!
Verizon just cut me off so I'm watching this on my friggin phone-
Back to hot dogs, beans, and Pabst Blue Ribbon for a while!
Later bro.
NickiSig 1 month ago
@NickiSig Nothing wrong with PBR Nicki ...
hazman440 1 month ago
I SEENT IT, I SEENT THE SCRATCH
NurseMan1911 1 month ago 5
@NurseMan1911 that line is not a scratch. the alaskans have a line that arches over the trigger
SonsOfLiberty65 1 month ago
The official and original cartridge designation is 45 Colt. Yes, it is also commonly and informally referred to as 45 long Colt.
geishpmp 1 month ago
Pete, the definition of insanity is doing the same thing over and over again and expecting a different result! Stop selling ammo bud, you're going insane!
NurseMan1911 1 month ago
@NurseMan1911 He's not selling it. He gave it away with the gun like my stupid ass did when I sold my Taurus LCP .380 (3 Boxes). I got a Bersa Thunder .380 (one month later) and had to buy ammo all over again. My primary carry weapon is the Springfield XD .45 Tactical. Yeah, it's big, but it's GUUUUD!!!
noelsingletary 1 month ago
I called Ruger asking about that pin.. the person I got on the line didn't know anything about it. Obviously if you got it and me too, it wasn't a fluke and obviously has a purpose.
Also, did you notice how the left side of the barrel now just says 'Read instruction manual' on these new Rugers? The old ones have a whole paragraph of legalese!
MikeReiner 1 month ago
This has been flagged as spam show
Goddamn! That's a bear stopper.
BTW: You can dremel that unflattering warning manual scroll off the Ruger Stainless then flitz it out. Makes that insulting, defacing sentence go away. Like its never been there!
FaganRoberts 1 month ago
I'm gonna order that cloth. The cylinder face on my GP100 is NASTY, and I can't get it off as it is. Thanks for the suggestion Pete!
MikeReiner 1 month ago
Comment removed
FaganRoberts 1 month ago
Fucking sweet Pete. I just bought one in .44 mag for Bonnie, this was her dream gun. Tomorrow is our 15th year wedding anniversary, and I'm taking it to the range with her police issue glock 22 that she wanted. I'm going to shred some targets and shed some tears.
R.I.P. Bonnie Jene....
djs694 1 month ago
A W E S O M E!!!!!! I love your original vid on this revolver (Hungry Man / Hellboy)! Makes my .41mag PC657 look like a little baby!!!! I would love to see ya shoot some 454 through though, holy damnation!!!! If I had this this I'd probably just shoot 45lc only. hahahaha. oh and I love the smell of the "Lead Remover" cloth! It works well on stainless but not so sure on bluing. Awesome vid!
TheOl1911 1 month ago
winchester 45lc PDX its a beast of a round made for the judge i think, Beast of gun Great to see ya getting some Guns Back
nlandoutfitters 1 month ago
That pin is for the main spring strut - when you remove the grips, cock the hammer, there is a hole in the strut for the pin. You can then lower the hammer, remove the strut/spring assembly, remove the hammer pivot pin, remove the hammer, and remove the trigger group assembly.
Piece of cake!
DTesch357 1 month ago
Yeah Buddy!
MattRise 1 month ago
And random tidbit of info - the Ruger revolvers with a brushed stainless finish can be cleaned up perfectly with 800 grit wet/dry sandpaper.
DTesch357 1 month ago
Pete, go to moonclips (.) com - you can get your Alaskan's cylinder machined for Moonclips, so you'll be able to shoot 454 Casull, 45 Colt, 45 ACP (with moon clips), 45 Auto Rim, and 45 Schofield all in the same gun.
It only costs 100 bucks. Your fat ass spends more than that on fries each week at McDonalds.
DTesch357 1 month ago
Badass revolver Pete! Hey I was wondering if you could recommend a steel guide rod for my G21 gen3? I really like the channel man. I've learned a lot.
GRIZZY357 1 month ago
@GRIZZY357 get it at 1800 glock me
theARMORYchannel 1 month ago
That is a great looking revolver bro
stainlessfour5 1 month ago
The Ruger "A" ! Sweet ... CONGRATS Pete ... !
dcselwitz 1 month ago
That is a beast, glad you got it back. Honestly dudee you should give the desert eagle another shot. You are the ONLY person i know who didn't have a good experience. Mine runs like a god damn swiss watch.
mmsi1002 1 month ago
Nice powerful revolver. Beefy as heck. By the way, the cartridge you keep mentioning is called a 45 Colt. 45 "long" Colt is a name people made up.
geishpmp 1 month ago
@geishpmp then why is LC on my ammo box? both terms are correct!
theARMORYchannel 1 month ago 10
@theARMORYchannel Technically, he's correct. This is apparent because there is no .45 "Short" Colt. The .45 Colt was unofficially designated the .45 "Long" Colt to prevent confusion with the shorter .45 Schofield.
jrmym2 1 month ago 2
@geishpmp No, Long Colt is considered a name as well.
NurseMan1911 1 month ago
Dam Pete you can plug a really fat bastard with that thing!
BleedingBullets4U 1 month ago
@Gleyen Why the sarcasim? I'm sure Pete would'nt like to be affiliated with our current "President".
coltcomphbar 1 month ago
congrats on the steady growth on the channel pete, glad you got your baby back!
ill vouch for pete, he has always responded to my PM`s and comments. watching this now, flitzing a brand new s&w 686 .357 mag lol
bjizzle123 1 month ago
hog leg, very nice
pjicleanair420 1 month ago
cor bon makes a gret self defence round in .45lc+p
fordxbgtfalcon 1 month ago 2
That pin is indeed for the mainspring housing; there should be a section in your manual reagarding detail stripping the weapon, or at least there is in the SP101 manual. :P
izvitz 1 month ago
The pin is so u can take down the main spring... Just cock the hammer, when the whole on the bottom of the spring is exposed then place the pin inside the whole... Hold it there then gently let down the hammer... Wahla the spring will come right out...,
Bro you ROCK!!!!
8talltines 1 month ago
That firearm is a beast Pete!!! That is the new Board Street Bully on the block lol.
PillzBerry27 1 month ago
Pete, if you have a bench grinder you can buy buffing wheels for it at Home Depot. In the same area they sell 1 inch tubes of grey and red paste to use with it. The grey is emery paste and the reds is jewelers rouge. Swap off your grind wheel for the buffer, when its spinning hold the grey paste up to it, load the buffer and then buff your gun. It works so good if you stay in one place too long it emery paste will buff off stamped lettering. Then switch to the red for mirror finish.
vze284nw 1 month ago
I have wanted that same revolver for over 5 years! I just cant afford it.
Did you know you have a Barack Obama add before this vid?
coltcomphbar 1 month ago
How about them Bruins and flyers
HuntingTimeAdventure 1 month ago
@HuntingTimeAdventure thats right old time bad asses!
theARMORYchannel 1 month ago
So pretty.
BALJIT147 1 month ago
The best part is... once you use all 6, you can use it as a club lol! cool gun pete!
bucketheadfan1 1 month ago
Dude...You fucking rock! Keep that shit up!
djquack12 1 month ago
@djquack12 thanks bro
theARMORYchannel 1 month ago
That gun is sick Pete... Im happy that you got your gun back bro.
lethalmach1 1 month ago
@lethalmach1 me 2 thanks buddy
theARMORYchannel 1 month ago
@theARMORYchannel I have been thinking of buying a revolver but I dont like the small ones... I love the bigger ones like the super blackhawk HUNTER!! lol!!
lethalmach1 1 month ago
very nice gun pete! congrats on your new member of the family! DO NOT GET RID OF IT THIS TIME!!!
fordxbgtfalcon 1 month ago 5
@fordxbgtfalcon ill try lol
theARMORYchannel 1 month ago
Damn Obama ads...
S12Boone 1 month ago
Good to see you are getting the boys back, the finish on that Ruger is awesome.
my1956effie 1 month ago
that is an awesome gun pete, can see why you are glad to have it back!!!
twowheeldan 1 month ago
congratulations on the new beast!!!
cutlerylover 1 month ago
pete save a little more and open a range!
HotDawgStand1 1 month ago
Faster: Slow justice...is no justice.
swiftcoyote 1 month ago
Pete, this is off topic, but bro you've lost some weight man!
Bodacious468 1 month ago
Never, ever get rid of ammo.
Bulwark1911 1 month ago
Great looking Ruger Alaskan Pete.
guns4funca 1 month ago
sweet gun pete! i had a raging bull in .454( well i had a couple raging bulls another in 44 magnum). 454 was mofo awesome:)
deathmetal44 1 month ago
All I have to say is SA-Wheat!!
MrKZizzle 1 month ago
@MrKZizzle thanks
theARMORYchannel 1 month ago
Damn it pete..im broke all the time cuz i watch your channel lol
187Kdogg 1 month ago
@187Kdogg me 2 lol
theARMORYchannel 1 month ago
Nice gun Pete
gunmanbryan243 1 month ago
@gunmanbryan243 thank you
theARMORYchannel 1 month ago
@theARMORYchannel have u seen the third season of suns of guns and if so what did u think of it?
extreamninja15 1 month ago
Ruger is so badass i wouldnt even know where to start. Every time we get a shipment from them my day is made. Starting with the MKIII up to the P9 lined by a whole galaxy of satin finished revolvers and not to forget the variety of 10/22s with the new BX25 magazine that fits as well to the SR22. Or how about its bigger brother the SR556 and my new personal favorites the mini-14 and 30 ( i wonder if that 14's ATI-Stock fits on the mini 14). This Brand is just hard to resist
37238315692 1 month ago
@37238315692 i love my MKIII
theARMORYchannel 1 month ago
@theARMORYchannel no wonder. i had some versions of it in my hands last year and even if i havent shot one yet i instantly liked how it felt and how unique its engineered and styled. except for the fluted barrels i'd rather go for the fat mean-looking match barrels even if its not neccesary at this barrel-length or cal. not exactly .454 btw Magtech sells the 454 as handgun hunting cartrige :D. Hellboy ... that name fits it
37238315692 1 month ago
that gun is a beast
oObassheadOo 1 month ago
I think I just exploded in my pants. Thanks Pete!!
Mr556tactical 1 month ago
@Mr556tactical your welcome!
theARMORYchannel 1 month ago
I trade constantly, and do the same damn thing. I had four 9mm's this year, and every time I trade it for a different caliber, I give the ammo away for extra boot.
isamtator 1 month ago
45 LC is a great round. pretty cool combo...blaster and master blaster. enjoy!
johniac7078 1 month ago
I'd still rather .45-70 or a 12ga slug for bear.
Jakerem870tac 1 month ago
Pete, watch this (/watch?v=FKI1xmtf5Ck). 454 stops a buffalo by Lynn Thompson (Cold Steel owner).
mafiajimmy 1 month ago 5
hey i was think of buying a ed brown whats the warrnty are these double action
micromanish 1 month ago
Hey Pete I ordered some Balistol and its the 16 ounce can but it didnt come with a spray nozzel. do they all come with a spray nozzel?
Nicho2177 1 month ago
@Nicho2177 umn i boxed about 50 Bottles (a 500ml) of it today for a shipment..and i made sure all of them had the nozzel attached.To bad they werent ment for export, i havent seen the export-can design from up close yet. Our cans Ballistol-Cans are in the classic german red white green design. But Hell from time to time someone even orders the 5 liter cannister far enough to drown in it :D Anyway i wonder if it would be cost effective if you order that stuff over here.
37238315692 1 month ago
that is one SWEET lookin' revolver!
Congrats on getting one back in your collection.
MrColt45acp 1 month ago
PS: If you want that gun to really look sharp give the cylinder, trigger, and hammer a high polish and then bead blast the body of the gun. It looks awesome that way.
TheYankeeMarshal 1 month ago
@TheYankeeMarshal nobody else knows how to do that well but you :-)
MrCleanerNash 1 month ago
I used to have one of those, but I sold it when I decided to get a S&W m629. Now I kind of want one again.
TheYankeeMarshal 1 month ago
Pete, glad u got the Alaskan back. Been wanting one for awhile, was also thinking of a .44 mag snubby to carry. However, I am doing some hand loading with a buddy. I could load .45 LCs up to .44 mag power and use them instead, the frame will certainly handle it, and can use 454s if needed. Best of both worlds and can get by with just one gun.
GunsNHarleys 1 month ago
It's so big you could beat the shit out of somebody if it wasn't loaded.
jstmo95 1 month ago
Bad ass gun pete, I want one so bad
sparkshaylee1221 1 month ago
Holy fuck. That's a beautiful firearm. I might cry.
stormtnt 1 month ago 4
Glad to see you got it back man congratulations
richchamb 1 month ago
I love that gun id like to have it in about a 4.5inch barrel though. (not sure what barrel lengths they come in0
XxJDG33xX 1 month ago
Damn, look at the crowning of the muzzle on that bad boy! I'm drooling! Because there is so much metal, it looks like a decorative piece/fine piece of machinery.
Pete YOU R DA MAN! Your expertise' with metals, and gun finishes was extremely informative! Thank you! And I have to point out that I LAUGHED MY FUCKING ASS OFF when you talked about spell check, and how every word in your sentences has red underling it AHAHAHAHAHAH! Thumbs up bro! I love seeing this channel grow since your 5th vid!
amore101 1 month ago
The prices are a bit higher but at least your getting a nice "NEW" gun. not some gun thats been handled by a 100 shitbags. Let's go FLYERS!
k1lladelph1a 1 month ago
I make the same ammo mistake myself when I get rid of guns sucks...Always wind up getting the same caliber in something else later on lol. Sweet pick up bro
MrCleanerNash 1 month ago
@MrCleanerNash thanks man
theARMORYchannel 1 month ago
Hey Pete that does look like a hellboy gun and if you ever run out of ammo you could beat someone to death with it. Nice gun bro hope you enhoy it
djalkaline1 1 month ago
Congrats on getting the Alaskan back bro that's a kick ass revolver.
1yankeecowboy 1 month ago
BADASS Bro!!!
KURSSLEY 1 month ago
'It gives us the feeling that guns give us'~ that is the quote of the year.
jmsmikey 1 month ago
nice gun good to see you got it back now it needs to be polished up and itll be a beauty
iontheprize90 1 month ago
Id like to see more DVD reviews. Im A BIG MOVIE BUFF.
CrossTheLine1000 1 month ago
Seems like your going back to your roots with this Ruger, Pete :. Classic Armorychannel;)
CrossTheLine1000 1 month ago
I have that Bad Ass Casull too, I heard it shoots a little more than just .454 and .45 long colt.... Do you know if it takes any other type of .45 round??
Colls1870 1 month ago
Bad Mamma Jamma!
SquidGunman 1 month ago
Great new pistol Pete how much is the power factor between the 454 & Toms 500 snubby !!.Thanks Bro
chrischiampo 1 month ago
That's a tits as hell pistol Pete. Ha, I made a funny ('Pistol Pete'). I may be transferring to Alaska & this may be a wise purchase for me. I'm thinking the .454 Casull shouldn't have a problem stopping a bear. ? Anyway, I would LOVE to see vid of you shooting this beast. lol
PoopyButt2012 1 month ago
@thearmorychannel i totally copied you! im picking up mine Tuesday. How is the recoil? does it really hurt? i had bad dreams about the recoil last night lol
SonsOfLiberty65 1 month ago
dude that gun looks real nice, you just made me add it to my list.
supercommander90 1 month ago
With the right load a .45LC will handle any of those south philly bears.
gaintwist32 1 month ago