Electric Scooter to Gas Conversion...Part III

[TheScooterdude80]

make sure u let the enamal cure for 7 days.

[TheScooterdude80]

use engine enamal on the gas tank , its oil and gas resistant.

[LINEHACKER]

X-cellent! good work

[VaughnProductions1]

any way to make in less noisy and how fast it go

[JamieMcClanahan]

How doe's it ride?

[Geminimissions]

@JamieMcClanahan Good, check my channel for the ride video!

[mapukmapuk]

nice!

[pivotboy63]

good job! looks almost professional

[Geminimissions]

@pivotboy63 Thank you very much!

[briggsfixer2]

it cant ldel when i put the throttel down it shuts off right away it doesnt even idol for a second

[Geminimissions]

@briggsfixer2 Clean the carb and make sure all the jets are clear

[briggsfixer2]

ok i turned it 1/2 turns its tuned right but when i try to idel it it with shut of right away and then when i go to start it it will shoot gas out of the muffeler

[Geminimissions]

@briggsfixer2 Try tuning it while at idle, when it runs the best, you got it!

[briggsfixer2]

hey what the carburator tuning on that engine is it 1 and 1/2 turns out

[Geminimissions]

@briggsfixer2 Yes, but myn is so touchy it took me awhile to tune it just right. It took down to a 1/32 of a turn!

[spitzification14]

that looks sick but you really should have used primer and after the paint you should have done clear coat

[Geminimissions]

@spitzification14 I didnt want to spend $20 on paint ; )

[openwheelmanic]

Slick Scooter ...glad to see you're using Tecumseh power...is that the stock carb?

[Geminimissions]

@openwheelmanic Yes but I had to order the air filter from Tecumseh.. It was a little over $20.

I too like tecumseh as much as briggs, maybe even a little more

[MrMoterKid]

Wow, that's sweet! With 3HP it should go a damn sight faster than my goped!