how does it helps my yoyo , i mean what yoyo does specially if i silicone it? p.s i have yyf whip and its my first yoyo , how can i get it responsive?:/
and just incase some people didn't watch the end he said dont do this in a closed area make sure that u do this in a well ventilated place such as outside and i guess let it dry there to
and just incase some people didn't watch the end he said dont do this in a closed area make sure that u do this in a well ventalated place such as outside and i guess let it dry there to
good question. Inspect the silicone job carefully, make sure there is no overflow. Make sure you didn't get any in the baring seat. Also, normally it takes about a day or 2 to break in a freshly siliconed yoyo. If you just keep playing with it, I'm sure it will break in and be unresponsive.
instead of having your silicone flat, you should try having it slightly concave, I heard somewhere that that was better. (I'm not talking about the KK bearing)
Zach! It's cool to see you making a video, I haven't seen you in a while. you probably don't remember who i am, but i am the only other 3a yoyoers at the yoyo club.
does it make a yoyo unresponsive
xxBASEBALLxSTARxx 3 weeks ago
I love this guy!
pugalakan 1 month ago
does this work with gasket maker?
siolo123 1 month ago
@siolo123 same here, i think it does,I have one too luckily. It will if its flowable or all-purpose basically.
MGDinoSan 1 week ago
that is the EXACT same silicone i bought!!!! :)
wolffang12341 2 months ago
how long dose the silcone last
sanchitpokarel 3 months ago
can you do this with a yyf gm?
alexwalters74 3 months ago
@alexwalters74 dont do that its super hard because of the bearing
afrofb1 2 months ago
how does it helps my yoyo , i mean what yoyo does specially if i silicone it? p.s i have yyf whip and its my first yoyo , how can i get it responsive?:/
jamaika112 4 months ago
To remove it, just use a exacto knife to lift it it will lift as one ring once it dries
mculich 5 months ago
what is recess
gjdrift99 5 months ago
@gjdrift99 its where the silicone response system goes.
MGDinoSan 1 week ago
wats the little dice next to the counter weight on the string ive seen it before
howtodude96 6 months ago
Red RTV silicone pwns too but it's a little harder to install
ponyman13 8 months ago
is there any way to remove the silicone if your not happy with the end result?
ImSoJohnDeleted 9 months ago
use a spoon much more convenient
xxxteamxxx1 9 months ago
your an asshole
mlkjr4 10 months ago
How can I take off the silicone around the recess if it is already dry?
1ofthemakers 11 months ago
when does that yoyo release?
NinjaYoyos 1 year ago
if i dont have flowable silicone can i use silicone sealant instead?
DRAMA426 1 year ago
are the 2010 freehand recesses deep enough for sili?
lolo2556 1 year ago
Comment removed
ButterscotchGenius 10 months ago
Probably not =)
ButterscotchGenius 10 months ago
Hey I got a little problem.
I got some CBC pads for my Protostar, and I just want to know how to replace them safely.
Sorry if this sounds kind of stupid, but I've never done it before and I just dont want to mess up a good yoyo.
Please reply as soon as possible.
Thanks.
pokedude6712 1 year ago
@pokedude6712
Just use a safety pin to take them out, then make sure to scoop off any left-over glue. =)
ButterscotchGenius 10 months ago
pls reply to my previouse comment
CAIDMASTEROFPYRO 1 year ago
could i use a guitar pick instead of a card
CAIDMASTEROFPYRO 1 year ago
can u use the space were friction stickers go
CAIDMASTEROFPYRO 1 year ago
@MrYoyo43 you are dumb it say in the video Flowable silicone
vinsonngo 1 year ago
This has been flagged as spam show
thx for the tip at the end.
and just incase some people didn't watch the end he said dont do this in a closed area make sure that u do this in a well ventilated place such as outside and i guess let it dry there to
Goseango999 1 year ago
thx for the tip at the end.
and just incase some people didn't watch the end he said dont do this in a closed area make sure that u do this in a well ventalated place such as outside and i guess let it dry there to
Goseango999 1 year ago
okay so i did exactly what you did and used everything you did but i used it on a duncan freehand and to one side and it is SUPER responsive!!!
i thought it would be UNRESPONSIVE :(
any help?
d4n60m3z 1 year ago
@d4n60m3z
good question. Inspect the silicone job carefully, make sure there is no overflow. Make sure you didn't get any in the baring seat. Also, normally it takes about a day or 2 to break in a freshly siliconed yoyo. If you just keep playing with it, I'm sure it will break in and be unresponsive.
TheYoyoWorkshop 1 year ago
@TheYoyoWorkshop What do you do when it gets in the bearing/spacer recess?
techdecklover253 10 months ago
word of the day: sticker chunks :)
Jordan4139 1 year ago
Should I do it to my dm?
bluespring6 1 year ago
@bluespring6 absolutley. Don't get yyj silicone beacuse this is wayyy better
Jordan4139 1 year ago
instead of having your silicone flat, you should try having it slightly concave, I heard somewhere that that was better. (I'm not talking about the KK bearing)
FreshTiIIDeathh 1 year ago
I'll try it I'm not sure if the groove is deep enough
bluespring6 1 year ago
i have a yoyofactory small bearing lunatic. is the groove deep enough
yoyokidify 1 year ago
haha i liked the beginning of when you said hello! hi thrower :D
TheYoYoGirl2 1 year ago
How do you remove it?
bdaboyzzz 1 year ago
would the spot on a plastic grind machine be deep enuf to do this?
tuffy464 1 year ago
@tuffy464 i did it. works great
deutschmasta1693 1 year ago
i use blue RTV silicone and a guitar pick. i use the side of the guitar pick that is at the corner but not the reassly sharp end
TheYoyomaster12 1 year ago
why should i silicon my yo yo?
turbotonic27 1 year ago
Zach! It's cool to see you making a video, I haven't seen you in a while. you probably don't remember who i am, but i am the only other 3a yoyoers at the yoyo club.
kartman530 1 year ago
thanks,
Does the silicone shrink when dried?
D3v3nd4 1 year ago
@D3v3nd4 Yes it does. The silicon surface will cave-in slightly which helps the yo-yo play non-responsively. Thanks for your questions
misfitrobot 1 year ago
does red gasket silicon work
yoyoguylol 1 year ago
@hubstacker yes is does.
motleycrue0317 1 year ago
Awesome video, very informative.
Maor686 1 year ago