The soldering is easy. The only thing thats kinna dificult is fitting the rather thick esc wires beneith the base and the frame. The wires are spacific to their length so, you cant cut them! Get the base and wires arranged to were you can push the base down to the mounting plate then feed the wires through the base pwr connector holes with a pair of needle nose pliers. AFter you get it together flash the esc's with the 2.0 firware "befor" you update the base firmware to 3.0..
Yes this happins.. Its said its best to flash the controllors with the new firmware with the old 2.7 base/gyro firmware vs the new 3.0.
At worst disconnect all the blue/black data cables but the one that dont work, then try to search for it.. Allso try it on a differ port.. The "virtual" controllor allso can fix it. I had mine to the point to were "no" controllors were found, no leds beeps or nothing. Dont panic, its the software.
I just bought the bl motors and x-csm, but one of the motor control boards doesn't show up in XControl. Hopefully I'll be able to get it switched out and up an running!
which motors do you used? from where do you buy them? send the link of supplier.
what is the rpm of motor?
swapnil17may 5 months ago
@swapnil17may hacker nock offs, 1050rpm google x shop
chessman21 5 months ago
This has been flagged as spam show
which motors do you used? from where do you buy them? send the link of supplier.
what is the rpm of motor?
swapnil17may 5 months ago
This has been flagged as spam show
Dear All,
I have some questiosn about psycholgy:
(1) Why do we love to fly RC planes?
(2) What is the motivation to have a flying toys for amusement in our office?
(3) How does flying toys encourage the well-being, motivation & team dynamics of employees?
(4) Why do we like to play social-interacting toys?
(5) How can flying toys be used in charitable and humanitian purposes?
THANK YOU IN ADVANCE for your creative ideas and brainstorm!!! :)
applesweeter 1 year ago
Comment removed
510DAZY 1 year ago
K_stick_yaw will make it go faster early in the stick's movement.
K_expo_yaw will make it go faster at the end of the stick's deflection.
chessman21 1 year ago
what do i have to do to get quik yaw speed on mine?
irishkendoll 2 years ago
moded x-ufo
chessman21 2 years ago
@chessman21 whats the yaw parameters when you did this video?
irishkendoll 2 years ago
Where are these sold?
frigger 2 years ago
please do you know of a site with info in this? i fly a bunch of rc helis but i never seen these b4, where can i look at it please?
Ollie9393 3 years ago
The soldering is easy. The only thing thats kinna dificult is fitting the rather thick esc wires beneith the base and the frame. The wires are spacific to their length so, you cant cut them! Get the base and wires arranged to were you can push the base down to the mounting plate then feed the wires through the base pwr connector holes with a pair of needle nose pliers. AFter you get it together flash the esc's with the 2.0 firware "befor" you update the base firmware to 3.0..
chessman21 3 years ago
hi Chess,
Next week i receive finaly my x-bl motor kit.
Was it easy to complete soldering and so?
Do you have some handy tips? :)
Thank you!!!
johnnyrinsma 3 years ago
No the settings are not default, these two below is whats changed.
K_stick_yaw will make it go faster early in the stick's movement.
K_expo_yaw will make it go faster at the end of the stick's deflection.
chessman21 3 years ago
Sweet piro's, the fastest I've seen yet.
guidoco21 3 years ago
hi is it just the origional settings? or did you do change something?
johnnyrinsma 3 years ago
How do you get your X to yaw that fast? what are your settings? I cant get mine to yaw that fast.
cybercesar 3 years ago
900 mah
chessman21 3 years ago
How manny mAh Lipo do u use in the movie?
tworoelio 3 years ago
Yes this happins.. Its said its best to flash the controllors with the new firmware with the old 2.7 base/gyro firmware vs the new 3.0.
At worst disconnect all the blue/black data cables but the one that dont work, then try to search for it.. Allso try it on a differ port.. The "virtual" controllor allso can fix it. I had mine to the point to were "no" controllors were found, no leds beeps or nothing. Dont panic, its the software.
chessman21 3 years ago
I just bought the bl motors and x-csm, but one of the motor control boards doesn't show up in XControl. Hopefully I'll be able to get it switched out and up an running!
guitdude13 3 years ago
thxs guys
chessman21 3 years ago
damn xD
tworoelio 3 years ago
Realy nice.
johnnyrinsma 3 years ago