Thermaltake Xaser VI I7 920 OC LC Photos High resolution

[augustotanaka]

Ai ai ai eu com uma dessas lá em casa heim? Eta coisa boa!

[Rakinushi]

Who manufactured the temperature display for the 3.5 bay?

[treocin]

nzxt

[duckycrayfish]

what rad is that? what do u have to do to mount it to the back?

[treocin]

swiftek apex ultima came with rad and the case can accommodate the rad

[bananacondaTV]

all I can say is wow, amazing setup. "not worthy!!" i'm still aircooling in 99' with my xaser III. i'd love to see some games run on that thing! thanks for sharing

[treocin]

actually it's worthy every penny. I don't play games but do lot of video editing and photography and this thing can get really hot especially if 2 pc are in same cabinet as these 2 are so it helps to keep the heat out. Thanks for comment. It has been a year since I built it and I didn't have single downtime. Maybe I put the 8 core Intel chip if it's going to support X58 format

[Jarheadftw]

do ya know how to change teh fron panel to teh right side? cause l dunno how lol any help would be muchly appreciated

[treocin]

I'm not sure what you mean by your question. Front panel from the case? send me a PM and be more specific thx

[luka2140]

Nice setup man, looks neat. I'm currently looking for a full tower case and might be liquid cooling. So did you have to do any mods on the case itself to fit all the w/c components?

[treocin]

well I had to Mod it quite a bit. Xaser is huge case but if you don't use some bay reservoir you have to drill the holes to put in place. Also I want the pump to be right under the res but not on the bottom of the case, I wanted to use the space on the bottom for one more drive if I need and one intake fan so I had to place the pump inside the 5.25 bay area. I used an old CD rom chassis to slide in in. This way I don't have to drill the whole in the case. There was not enough room for my hands

[treocin]

you can see on my other vids with this setup. I also tilted the bottom fan so it has some intake room. Holes on the bottom of the case aren't enough. So I put some plastin 1 inch washers between the fan and the and the bottom to raise it up and tilted. It blows right on the GPU. I'm putting today in fan for the RAM it's the dominator series fan. I have all 6 slots taken so it gets little hot. I also made one knob to control both Silversone fans in same time. The RPM is shown on display

[treocin]

on front but it doesn't control 4 pin fans. So I used one knob from the fan, cut the cables on both and soldered them together. They are same so same increase is going to bring same RPM. Also consider one thing, you should have some kind of flow controller. I had to place it somewhere where is visible from the outside but not in front. Currently there are 5 HDD and I can put 2 or 3 more if I need. (I need a lot) The fans from the TT are joke so get something better.

[luka2140]

Wow, sounds like a decent amount of work. The CoolerMaster HAF 932 looks like a good case for water cooling. Might go with that. Thanks for the help though champ :)

[RE4L72]

nice upgrade, i cant wait to get i7 but i need a new tv first.

[treocin]

I7 is the best for the moment and for me better than a TV lol

[LEADLAYER420]

wow nice setup shit i have that out an on display instead of hid under ur desk lol whole setup looks mean .

[treocin]

Thanks for your comment. Check the other video of the same setup. Even though the other vids are lower quality that these photos

[treocin]

I know but this is in bedroom and it's just very small.2 room apartment so I have to have it hidden. I love this credenza (it was on clearance at Jordan's but great) I have to share the room with my partner so it's impossible to have it on desk. It just won't fit There are 2 pcs using KVM switch so both can access 2 monitors in same time. Sometimes I just run VNC or Netop so I don't have to switch between them. One is for email, chat and shiit and the other for graphics, games etc.

[treocin]

It was but I really enjoy it. Could I have done less work and have it done easier? Sure I could but it was fun. I wanted to be perfect. If you get the LC all in one none of this is required. If you stick with stock it's also easy You can have it done in 6 hours since unpacking to turning it on