How to Use & Maintain a Chainsaw : How to Mix Gas & Oil Chainsaw Fuels

[RyanAnanymous]

good thanks!!!

[ThePipeDude]

If there is not an adequate amount of chain lube in tool does or will it prevent the machine from starting?

[soverato3]

can i just use any cheap 2stroke oil??

[redneckrollercoast1]

@soverato3 yes but the life of your machine will be shorthand.

[soverato3]

@redneckrollercoast1 well...im using cheap oil now for like a half a year in all my 2stroke engines and they preform great! i have a 50cc motorized bicycle and use it every day and i ran for like 3000miles on cheap oil so the only differens between cheap and expencife oil is the brand and bottle =D its mells the same either ant its $2,50 a liter so i would say use cheap oil! it realy works!=)

[airsoftman20]

i didnt know amounts can be queer...... lol

[NonStops909]

DOse this work for pocket bikes?

[airsoftman20]

@NonStops909 any 2 cycle engine can use it

[littledude551]

Dude the oil cap is on

[RailRoadWorker18]

dose anyone know the fuel mixture ratio for a Vintage McCulloch Mac 1-52 Chainsaw?

[USAforeverr]

shut up bro hes just trying to help us

[1972FordF150]

was this comment for Echosrm230??

[Echosrm230]

this guy should drink the oil and poor the gasoline all over his body,and light a match on him self!!!!!!!

[OldTimerGuy58]

@Echosrm230 I agree! He didnt even bother to take the cap off the bottle!

[djunified]

this is not required for oil injected machines in case anybody didnt know

[yamahabansheerider]

u mean people DON'T know how to mix gas with oil? its NOT rocket science!

[ballsniff13]

haha he said queer

[weirdstuffanimation6]

can i point somthing out look at 1:13 he dosnt take the lid off the oil

[Smallgasengine1]

you know why because he already pre-mixed the gasoline he is just demonstrating

[arabicdude01]

how much gas and oil you have to mix to get 25:1

[rtyees]

if leaving the oil cap on is good enough for Drewe Fynne it's good enough for me

[rocky373]

How does he get the oil out of the bottle with the cap still on it?

[Smallgasengine1]

you know why because he already premixed the gasoline he is just demonstrating it

[murucky]

ridr660r

I have just bought my first chainsaw and am finding his advice very helpful. If you don't like him go and watch Sesame Street. You are the real Dumbass with your inane postings.

[dallasrdb]

did he say  QUEER

[rider660r]

This guy Drew Finn is a dumbass don't listen to most anything he has to say!

[weirdstuffanimation6]

my chain saw is about 20 years old and the mixtuer says 25:1 witch is rong for the 2 stoke oil of these days

[7plymaple]

i think your right cause i guess the oils have changed and some are still diffrent...i just bought a chainsaw and i guess you have to mix it the ratio the oil can says and not what the chainsaw says...most oils i looked at say 2.6 oz./gallon and others i looked at say 3.2 oz./gallon(free one with my saw)...i dont know but its the best answer i could get from anyone..most i asked said "it doesnt really make much diffrence"....if that was the case , why would it come in 2.6 oz. and 3.2 oz. sizes?

[weirdstuffanimation6]

i have no idea but usually the mixture for any 2 stroke engine is 50:1 on good oil i mean even cheap oil is good oil my chain saw runs fine with cheap oil mixed at 50:1