This isn't an econominer. It uses a skipper wheel for regeneration, instead of capacity. Each person use 75Gal per day, so your calculated capacity should be the total use per day divided by the your calculated capcity. In our case, every 7 days we should have a regeneration. Yours might be different. Set yours accordingly, but add a day or two into that, if you like
* Unit regenerates at 2:00 a.m - 4:00 a.m. ( preset, can not be changed ), so to make it regeneration 12 hours later ( or sooner ) at 2 p.m., you just set the Time of Day 12 hours off ( fast or slow ).
12 day pins are normally in a "pattern" of day to regeneration ( every 2nd, 3rd, 4th, or 6th ). The numbers are for reference only. The wheel moves once each day ( when the Time of Day reaches 2 a.m.., if the PIN is OUT, the system will Start )
Comment removed
Dabearx 7 months ago
This isn't an econominer. It uses a skipper wheel for regeneration, instead of capacity. Each person use 75Gal per day, so your calculated capacity should be the total use per day divided by the your calculated capcity. In our case, every 7 days we should have a regeneration. Yours might be different. Set yours accordingly, but add a day or two into that, if you like
airconguy1 11 months ago
* Unit regenerates at 2:00 a.m - 4:00 a.m. ( preset, can not be changed ), so to make it regeneration 12 hours later ( or sooner ) at 2 p.m., you just set the Time of Day 12 hours off ( fast or slow ).
12 day pins are normally in a "pattern" of day to regeneration ( every 2nd, 3rd, 4th, or 6th ). The numbers are for reference only. The wheel moves once each day ( when the Time of Day reaches 2 a.m.., if the PIN is OUT, the system will Start )
WatermanAndy 2 years ago